Seven new energy car companies have been investigated for violations! The Ministry of Industry and Information Technology interviewed Dongfeng Motor to be on the list for two years in a row.

[7 new energy car companies have been investigated for violations! Recently, the first Department of equipment Industry of the Ministry of Industry and Information Technology talked about seven new energy vehicle production enterprises that had violations in the supervision and inspection of new energy vehicles in 2020, and issued a notice of rectification, requiring relevant enterprises to earnestly fulfill their principal responsibilities, seriously analyze the causes of the problems, and rectify the existing problems within a time limit in strict accordance with the requirements of access management.

Recently, the first Department of equipment Industry of the Ministry of Industry and Information Technology talked about seven new energy vehicle production enterprises that had violations in the supervision and inspection of new energy vehicles in 2020, and issued a rectification notice requiring the relevant enterprises to earnestly fulfill their principal responsibilities. we will conscientiously analyze the causes of the problems, strictly comply with the requirements of access management, and rectify the existing problems within a time limit.

At the same time, in accordance with the relevant laws and regulations and the regulations on access management, and according to the seriousness of the violations, the offending enterprises shall, in accordance with the law, revoke or suspend the "announcement" of the offending products, suspend the uploading of electronic information on the qualification certificates of new energy vehicles, suspend the declaration of new energy vehicles and new products, cancel the spot check of unqualified models, such as the catalogue of recommended models for the promotion and application of new energy vehicles, and incorporate the violation information into the enterprise credit record. Included in the follow-up focus of supervision.

A reporter from the Science and Technology Innovation Board Daily learned from the official website of the Ministry of Industry and Information Technology that on September 23 this year, the Ministry of Industry and Information Technology released the results of supervision and inspection of new energy vehicles in 2020.

image

According to the relevant provisions such as the measures for the Administration of Road Motor vehicle production Enterprises and Product access, and the regulations on the Management of New Energy vehicle production Enterprises and Product access, the Ministry of Industry and Information Technology found that eight models of seven enterprises did not meet the requirements of production consistency. The main situation is as follows:

Among the new energy passenger cars, two models of two enterprises (Nanjing Jinlong bus Manufacturing Co., Ltd., Dongfeng Automobile Group Co., Ltd.) do not meet the corresponding requirements. Items such as the maximum speed of 30 minutes and front seat belts do not meet national standards or management regulations.

image

Among the new energy buses, the products of four enterprises (Zhuhai Guangtong Automobile Co., Ltd., Chengdu Guangtong Automobile Co., Ltd., Nanjing Jinlong bus Manufacturing Co., Ltd., Dandong Huanghai Automobile Co., Ltd.) do not meet the corresponding requirements, involving instructions, equipment quality, seat fabric burning speed, vehicle nameplate and other items do not meet the national standards or management regulations.

image

Among the special purpose vehicles for new energy, the products of two enterprises (Shandong Lannuo Automobile Co., Ltd., Jiangsu Aoneng New Energy Automobile Co., Ltd.) do not meet the corresponding requirements. The items involving the word height of spraying on both sides of the cab, the energy density of the power battery system, and the equipment quality do not meet the national standards or management regulations.

image

A reporter from Science and Technology Innovation Board Daily noted that in the results of the supervision and inspection, the new energy passenger vehicles and new energy passenger cars of Nanjing Jinlong bus Manufacturing Co., Ltd. did not meet national standards or management regulations, and became the most frequently mentioned new energy vehicle company.

A reporter from Science and Technology Innovation Board Daily noted that the results of the supervision and inspection showed that the violations of the seven new energy vehicle companies were different.

According to the statistics of a reporter from Science and Technology Innovation Board Daily, among all kinds of violations, two types of violations, "the quality of equipment is beyond the error range" and "without instructions", are mentioned most frequently.

Among them, the GTQ6119BEVH21 pure electric bus of Zhuhai Guangtong Automobile Co., Ltd. has the illegal problem that it is not equipped with instructions and the equipment quality is beyond the error range, and the CAT6858CRBEV pure electric city bus of Chengdu Guangtong Automobile Co., Ltd. has the illegal problem that it is not equipped with instructions and the burning speed of seat fabric does not meet the requirements. The CSR6110GSEV3 pure electric city bus of Jiangsu Aoxin Energy vehicle Co., Ltd. has some illegal problems, such as the equipment quality exceeds the error range, and the type of electric vehicle charger is inconsistent with the record parameters.

On the issue of power battery violations, the SC6105ABEV pure electric city bus of Shandong Lanuo Automobile Co., Ltd., the spray word height on both sides of the cab does not meet the requirements, and the energy density of the power battery system does not meet the requirements of "the energy density of the power battery system of the pure electric truck is not lower than that of 125Wh/kg".

The 30-minute maximum speed of the NJL6420EV3 pure electric multi-purpose passenger vehicle of Nanjing Jinlong bus Manufacturing Co., Ltd. does not meet the requirement of "the 30-minute maximum speed of the pure electric passenger vehicle is not lower than 100km/h"; the company's NJL6809EV15 pure electric city bus, the actual number of seats is not consistent with the number of seats marked on the nameplate.

The DFM7000G1F9BEV pure electric car of Dongfeng Automobile Group Co., Ltd. has a violation problem that the name of the front seat belt manufacturer is inconsistent with the filing parameters.

The DD6109EV13 pure electric city bus of Dandong Huanghai Automobile Co., Ltd. is not equipped with a dazzling device to prevent direct sunlight in the cab.

A reporter from Science and Technology Innovation Board Daily noted that in the results of the supervision and inspection, the two new energy passenger cars mentioned were the D07 entrepreneur model of Nanjing Jinlong Kaiwo brand and the Dongfeng Fengshen E70 model. According to reports, Fengshen E70 is currently mainly sold through B-end customers such as online ride-hailing platforms, including Dongfeng Travel.

In view of the above situation, an automotive engineer told Science and Technology Innovation Board Daily that "production consistency" is a key factor in testing the quality of vehicle products, and only by achieving production consistency can product quality be better guaranteed. "

On September 29 this year, the first equipment Industry Department of the Ministry of Industry and Information Technology and the Network Security Administration organized and held a "opinions on strengthening Intelligent Network Union Automobile Manufacturing Enterprises and Product access Management" (hereinafter referred to as "opinions") by videoconference.

The meeting pointed out that all automobile manufacturing enterprises should fully grasp the new trend of intelligent network-connected automobile development, seize new opportunities, and comprehensively strengthen automobile data security, network security, software upgrade, functional safety, and expected functional safety management. effectively ensure product quality and production consistency.

In the results of the supervision and inspection, two models of Nanjing Jinlong bus Manufacturing Co., Ltd. (hereinafter referred to as: Nanjing Jinlong) are in violation of regulations. In 2010, Skyworth Group founder Huang Hongsheng established Kaiwo New Energy Automobile Group Co., Ltd. (hereinafter referred to as: Kevo Automobile). Then, Kaiwo acquired and reorganized Nanjing Jinlong, thus realizing the simultaneous development of merchants and passengers.

In terms of sales, according to the latest data from China bus Statistical Information Network, from January to September this year, in the ranking of new energy bus sales of more than 7 meters, Kaiwo Automobile (Nanjing Jinlong) sold 1268 vehicles, an increase of 49.53 percent over the same period last year, with a market share of 5.07 percent. In the list, the top three car companies are: Yutong bus, BYD, CRRC Electric; the corresponding market share is 24.35%, 13.38%, 8.38%.

According to Tianyan inspection information, the legal representatives of Zhuhai Guangtong Automobile Co., Ltd. (hereinafter referred to as: Zhuhai Guangtong Automobile Co., Ltd.) and Chengdu Guangtong Automobile Co., Ltd. (hereinafter referred to as: Chengdu Guangtong Automobile) are all Lai Xinhua. Zhuhai Guangtong Motor is 100% owned by Yinlong New Energy Co., Ltd., which is indirectly held by Wei Yincang and Dong Mingzhu.

At the same time, Chengdu Guangtong Automobile is 100% owned by Zhuhai Guangtong Automobile.

Tianyan check information shows that Zhuhai Guangtong Automobile has four pieces of high-risk information about the person being executed. Among them, on October 15, Zhuhai Guangtong Motor became the person to be executed. The case number is (2021) Yue 0404 holding No. 2960, and the execution target is about 185700 yuan.

According to the statistics of a reporter from Science and Technology Innovation Board Daily, this year alone, Zhuhai Guangtong Motor has executed a cumulative target of about 28.9839 million yuan four times.

Among the seven car companies interviewed, many listed companies have emerged.

As of October 18, Dongfeng Motor closed at 7.77 yuan per share, with a total market capitalization of 15.54 billion yuan.

Data show that Dandong Huanghai Automobile Co., Ltd. (hereinafter referred to as: Dandong Huanghai Automobile) is a subsidiary of Liaoning Shuguang Automobile Group. As of October 18, dawning shares closed at 3.70 yuan per share, with a total market capitalization of 2.5 billion yuan, while Tianyan check information shows that the major shareholder of dawning shares is Huatai Motor.

In addition, Tianyan check information shows that Jiangsu Aoxin New Energy Automobile Co., Ltd. (hereinafter referred to as: Aoxin Company) is 100% controlled by Yancheng State-owned assets Investment Group Co., Ltd.

In November last year, the Ministry of Industry and Information Technology established a notification system for the results of production consistency supervision and inspection of road motor vehicle products, and announced that 27 models of 25 enterprises had production consistency problems. Among them, among the new energy passenger cars, nine models of nine companies, including BAIC, GAC MOTOR, Guangzhou Auto Mitsubishi, BYD, Guangzhou Automobile Honda and Geely, have violations.

Compared with the latest supervision and inspection of new energy vehicles in 2020, the number of companies with violations of new energy passenger vehicles has been reduced to 2. However, it should be noted that Dongfeng Motor has appeared twice in a row in the notification of the results of supervision and inspection announced by the Ministry of Industry and Information Technology.

In this regard, a senior expert in the automotive industry told Science and Technology Innovation Board Daily that "mass-produced vehicles on an enterprise scale must be consistent with the key indicators of the sample cars submitted for inspection in the process of product access." In recent years, due to the deviation of the state of the sample car, the change of R & D parameters, the deviation of quality control in the production process and other reasons, the problems of 'production consistency' emerge one after another in the industry. "

"for enterprises, ensuring the 'production consistency' of products is very important and can not be ignored." This is what the senior expert in the automobile industry told Science and Technology Innovation Board Daily.

A reporter from Science and Technology Innovation Board Daily learned that in the next step, the Ministry of Industry and Information Technology will further strengthen the supervision of road motor vehicle products after the incident, work closely with relevant departments, strengthen information sharing, and implement joint punishments. we will effectively ensure the consistency, quality and safety of vehicle products.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Chile's Water Crisis Threatens Atacama's Copper and Lithium Mining Amid 14-Year Drought
8 hours ago
Chile's Water Crisis Threatens Atacama's Copper and Lithium Mining Amid 14-Year Drought
Read More
Chile's Water Crisis Threatens Atacama's Copper and Lithium Mining Amid 14-Year Drought
Chile's Water Crisis Threatens Atacama's Copper and Lithium Mining Amid 14-Year Drought
Chile’s most pressing crisis at present is the issue of water resources. The Atacama Desert in Chile is one of the driest regions in the world and also the core area for copper and lithium ore extraction. The local area has experienced a drought for as long as 14 years, and reservoir storage has fallen to only about 30%. For miners, water resources are not a secondary issue, but an indispensable key production factor in such processes as ore processing, dust suppression, and equipment cooling. The decline in ore grade has further exacerbated the predicament
8 hours ago
Trump Adjusts Metal Tariffs, Applies 50% Rate to Consumer Prices Under Section 232, Details Unclear
8 hours ago
Trump Adjusts Metal Tariffs, Applies 50% Rate to Consumer Prices Under Section 232, Details Unclear
Read More
Trump Adjusts Metal Tariffs, Applies 50% Rate to Consumer Prices Under Section 232, Details Unclear
Trump Adjusts Metal Tariffs, Applies 50% Rate to Consumer Prices Under Section 232, Details Unclear
US President Trump adjusted the national security tariffs on imports of steel, aluminum, and copper, lowering the tariff rates on derivative products made from these metals, streamlining compliance procedures, and preventing the declared value of imports from being understated.A senior Trump administration official said that, under a proclamation signed by Trump, the US would continue to maintain a 50% import tariff on imports of metal commodities such as steel, aluminum, and copper pursuant to Section 232 of the Trade Act of 1974, but would apply this rate to the price paid by US consumers. It is currently unclear how the selling price—and the resulting tariffs—would be determined.
8 hours ago
Barrick Confirms 2028 Production Target for Reko Diq Copper-Gold Project in Pakistan Despite Budget Concerns
8 hours ago
Barrick Confirms 2028 Production Target for Reko Diq Copper-Gold Project in Pakistan Despite Budget Concerns
Read More
Barrick Confirms 2028 Production Target for Reko Diq Copper-Gold Project in Pakistan Despite Budget Concerns
Barrick Confirms 2028 Production Target for Reko Diq Copper-Gold Project in Pakistan Despite Budget Concerns
Barrick Mining said that its Reko Diq copper-gold project in Pakistan still plans to achieve first production by the end of 2028.The project is a large-scale copper-gold project jointly developed by Barrick, the Pakistani government, and relevant joint venture partners, and is located in Balochistan, Pakistan. Although the company had previously warned that the capital budget previously disclosed for the project's two phases could face a significant increase, the 2028 production commencement target remained unchanged.
8 hours ago