Downstream nickel PMI contracts for 3rd straight month in Jan

Đã xuất bản: Feb 01, 2019 19:03 (GMT+8)
The comprehensive PMI dropped 1.14 from Dec to 45.76 in Jan

SHANGHAI, Feb 1 (SMM) – The purchasing managers' index (PMI) for the downstream nickel industries dropped 1.14 from December to 45.76 in January, below 50 for the third consecutive month, showed SMM data. A reading below 50 indicates contraction. 

The sub-index for production increased 1.27 on the month and came in at 41.46, pulled by the downstream stainless steel and alloy sectors as consumers restocked ahead of CNY. However, environmental rectification works in Jiangsu and Hunan provinces, as well as earlier breaks in the southern electroplating plants, lowered production in the electroplating industry. This kept the overall sub-index for production below 50 in January. 

Weak orders in the stainless steel, electroplating, and battery sectors dragged the sub-index for new orders by 4.71 on the month, to 40.08 in January. The CNY factor was the major cause.    

The sub-index for raw materials inventory nudged up 0.15 from December to 72.24 in January, as steel mills stockpiled raw materials such as refined nickel for the holiday. This was reflected by a high index for raw materials inventory in the stainless steel sector, at 74.4 for January. Rising prices of nickel kept those steel plants restocked as needed last month.

Accumulated in-plant inventories at battery producers raised the sub-index for finished product inventory by 2.38 month on month, to 45.22 in January. 

For February, the preliminary PMI for downstream nickel industries stood at 42.28, down 3.48 from January, SMM survey showed.

Stainless steel

In the stainless steel sector, all the sub-indexes, except for purchasing price index, remained flat from December and this resulted in little changes in the comprehensive PMI for the industry, standing at 47.21 for January. The sub-index for purchasing price surged 61.15 on the month to 77.58, bolstered by rising prices of nickel. 

Some steel mills underwent maintenance from mid-January, and this kept the production sub-index below 50 in January, at 43.3. Overselling at a southern steel mill grew the backlogged order index, by 16.74 from December to 66.74. 

The preliminary PMI for the stainless steel industry in February shrank to 40.9 as accumulated inventories of finished products will affect production. Market participants mostly took a moderate to a bullish outlook on nickel prices after the holiday, and this supported the preliminary sub-index for purchasing price above 50 in February. 

Electroplating

The PMI for electroplating industry declined from December as expected, to 22.78, as CNY breaks and environmental rectification weighed on new orders and production.

The preliminary PMI in February for the industry was 50, with sub-indexes for production and new orders standing both at 50, as producers' rectification works approach the end. 

Alloy

Across alloys, the PMI for January climbed 7.39 from December to 50, beating expectations. Higher index for purchasing volume accounted for the increase, as some alloy plants operated in high gears to fulfil orders in advance before CNY. 

Soaring prices of raw materials bolstered the purchasing price index by 94.02 month on month, to 97.13. Downstream demand from industries of rail transportation, military, and chemicals maintained stable, but demand from containers weakened. 

The alloy industry's preliminary PMI in February came in at 46.85, down 3.15 from January, as extended breaks at some alloy producers may lower production by 30% on the month. This is forecasted to lower both indexes for production and new orders by 5.73 from January to 44.27. 

Battery

The PMI for the battery industry in January lost 5.43, and stood at 44.51, compared with the expected 51.39. Smaller orders from the traditional nickel-hydrogen battery sector dragged the sub-index for new orders sharply by 18.7, and this led to the lower PMI. The preliminary PMI for the battery industry will nudge up to 50.43 in February, on the expectations of improved demand after the holiday. 

For other downstream industries, the PMI registered 45.88 in January, up 2.19 on the month, and higher than the expected 45.55. While the production index went up some 6.85, overall weak demand kept the sub-index for new orders at 34.02 in January. For February, the PMI across other industries will inch up but remain below 50, at 46.69. 

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM Tin nhanh Thép không gỉ] Ấn Độ gia hạn điều tra chống bán phá giá đối với thép không gỉ cán nguội từ Trung Quốc, Indonesia và Việt Nam thêm 6 tháng
12 giờ trước
[SMM Tin nhanh Thép không gỉ] Ấn Độ gia hạn điều tra chống bán phá giá đối với thép không gỉ cán nguội từ Trung Quốc, Indonesia và Việt Nam thêm 6 tháng
Đọc thêm
[SMM Tin nhanh Thép không gỉ] Ấn Độ gia hạn điều tra chống bán phá giá đối với thép không gỉ cán nguội từ Trung Quốc, Indonesia và Việt Nam thêm 6 tháng
[SMM Tin nhanh Thép không gỉ] Ấn Độ gia hạn điều tra chống bán phá giá đối với thép không gỉ cán nguội từ Trung Quốc, Indonesia và Việt Nam thêm 6 tháng
Tổng cục Phòng vệ thương mại Ấn Độ (DGTR) đã ra thông báo vào ngày 22 tháng 9, xác nhận chính phủ trung ương phê duyệt gia hạn thời hạn điều tra chống bán phá giá đối với các sản phẩm thép không gỉ cán phẳng nguội có xuất xứ hoặc xuất khẩu từ Trung Quốc, Indonesia và Việt Nam thêm sáu tháng, từ ngày 28 tháng 9 năm 2026 đến ngày 28 tháng 3 năm 2027. Việc gia hạn vẫn giữ nguyên phạm vi sản phẩm ban đầu, bao gồm thép cuộn, thép dải, thép tấm, thép lá và thép hình tròn dòng 300 và 400, mà không đưa ra bất kỳ kết luận hay mức thuế sơ bộ nào. Cuộc điều tra bắt đầu từ ngày 29 tháng 9 năm 2025, áp dụng cho các mác thép austenit, ferit và martensit cụ thể, loại trừ các sản phẩm cán phẳng nóng, mác thép song pha và các sản phẩm dòng 200 có hàm lượng niken cụ thể.
12 giờ trước
[SMM Analysis] Cắt giảm sản lượng Indonesia và thận trọng trước kỳ nghỉ làm chậm đà giảm giá NPI
24 Sep 2026 16:47 (GMT+8)
[SMM Analysis] Cắt giảm sản lượng Indonesia và thận trọng trước kỳ nghỉ làm chậm đà giảm giá NPI
Đọc thêm
[SMM Analysis] Cắt giảm sản lượng Indonesia và thận trọng trước kỳ nghỉ làm chậm đà giảm giá NPI
[SMM Analysis] Cắt giảm sản lượng Indonesia và thận trọng trước kỳ nghỉ làm chậm đà giảm giá NPI
Việc cắt giảm sản lượng của Indonesia làm chậm đà giảm giá NPI, nhưng tồn kho cảng tăng và nhu cầu thép không gỉ yếu khiến người mua thận trọng. Mức chiết khấu của NPI so với niken tinh luyện ngày càng nới rộng, cải thiện đôi chút hiệu quả kinh tế của việc chuyển đổi sang matte cao cấp, dù bán NPI trực tiếp vẫn có lợi hơn.
24 Sep 2026 16:47 (GMT+8)
[SMM Analysis] Nhu cầu hạ nguồn không cải thiện khi giá các sản phẩm trung gian niken phân hóa
24 Sep 2026 16:35 (GMT+8)
[SMM Analysis] Nhu cầu hạ nguồn không cải thiện khi giá các sản phẩm trung gian niken phân hóa
Đọc thêm
[SMM Analysis] Nhu cầu hạ nguồn không cải thiện khi giá các sản phẩm trung gian niken phân hóa
[SMM Analysis] Nhu cầu hạ nguồn không cải thiện khi giá các sản phẩm trung gian niken phân hóa
Giá thu mua MHP suy yếu trong bối cảnh nguồn cung dồi dào và hoạt động mua vào thận trọng từ phía hạ nguồn, trong khi giá thu mua niken matte cao cấp giữ ổn định. Bất chấp giá niken chuẩn phục hồi, giá thành phần niken và coban của MHP vẫn giảm. Các sản phẩm trung gian niken dự kiến sẽ tiếp tục chịu áp lực trong ngắn hạn.
24 Sep 2026 16:35 (GMT+8)
Downstream nickel PMI contracts for 3rd straight month in Jan - Shanghai Metals Market (SMM)