Key Takeaway From SMM Metal Industry Annual Conference: Evolvement Of China Aluminum Capacity

Đã xuất bản: Nov 02, 2023 10:14 (GMT+8)
Nguồn: SMM
Aluminum Supply Side: Domestic production capacity reaches maximum, industry operating rate progressively increases each year

Aluminum Supply Side: Domestic production capacity reaches maximum, industry operating rate progressively increases each year

From 2013 to 2015, domestic aluminum production capacity was in surplus, leading to industry-wide losses and low operating rates

In 2016-2017, the National Development and Reform Commission (NDRC) along with three other ministries issued document No. 656 in April: "Action Plan for Rectifying Illegal and Non-compliant Projects in the Aluminum Industry". This led to the withdrawal of illegal production capacity within the industry.

Between 2018 and 2019, with the gradual advancement of domestic aluminum capacity replacement projects, the production capacity of the domestic aluminum industry gradually recovered to around 43.2 million mt.

Since 2020, with the gradual completion of capacity transfer projects in regions such as Yunnan, the operating capacity of the domestic aluminum industry is nearing 45.5 million mt. The development of aluminum in Shandong, Xinjiang, Inner Mongolia, and Yunnan is thriving, accounting for 58% of the domestic production capacity.

With the "30·60 " carbon peak targets in place, the future prospects for low-carbon aluminum development are broad. The proportion of wind and solar power-powered aluminum production capacity in Yunnan and the western regions will continue to increase. Meanwhile, a significant amount of thermal power-based aluminum capacity in Shandong, Henan and other regions is expected to be transferred in the future.

In 2023, the domestic aluminum industry's operating rate is projected to recover upwards, leading to high production levels.

Since 2022, the supply side of the domestic aluminum industry has experienced significant fluctuations in operating capacity due to dual control on energy consumption1 and issues with electricity supply and demand. This is especially evident in the Southwest region, where areas like Yunnan, Guizhou, and Sichuan have repeatedly experienced production stops and resumptions due to the variability of their hydropower supply. As the proportion of hydroelectric power-based aluminum in areas like Yunnan continues to rise, substantial uncertainties still exist on the supply side.

(1Dual control of energy consumption primarily refers to the control of both total energy consumption and energy intensity. Total energy consumption refers to the sum of all types of energy consumed by various sectors of the national economy and households within a certain region over a specific period. Energy intensity refers to the amount of energy consumed to produce one unit of gross regional product within a certain period.)

By the end of August 2023, Yunnan region had essentially completed resumption of production, with only 130,000 mt awaiting resumption and another 120,000 mt of transferred capacity pending production. All other operations were at full capacity. The total operating capacity in the Yunnan region has reached 5.55 million mt, an increase of approximately 2.29 million mt since early June. The supply pressure in the southwest region will continue to be prominent. As of now, the domestic existing aluminum capacity is approximately 45.2 million mt, with the operating capacity recovering to around 42.94 million mt, up 2.52 million mt YoY.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Giá chào premium MJP CIF quý IV năm 2026 đã điều chỉnh của RTA ở mức 280 USD/tấn
12 giờ trước
Giá chào premium MJP CIF quý IV năm 2026 đã điều chỉnh của RTA ở mức 280 USD/tấn
Đọc thêm
Giá chào premium MJP CIF quý IV năm 2026 đã điều chỉnh của RTA ở mức 280 USD/tấn
Giá chào premium MJP CIF quý IV năm 2026 đã điều chỉnh của RTA ở mức 280 USD/tấn
Giá chào premium CIF quý IV/2026 của RTA đối với MJP điều chỉnh còn 280 USD/tấn (giảm từ 310 USD/tấn). Hiệu lực đến ngày 28/09/2026
12 giờ trước
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
24 Sep 2026 20:58 (GMT+8)
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Đọc thêm
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Ngày 20/9, máy cán thô tấm dày thuộc dự án sản xuất thông minh vật liệu mới nhôm công suất 720.000 tấn/năm của Công ty TNHH Công nghệ Vật liệu mới Hà Nam Yirui chính thức đi vào sản xuất. Với tổng vốn đầu tư 1,5 tỷ nhân dân tệ, dự án tận dụng mặt bằng nhà xưởng hiện có để xây dựng dây chuyền cán nóng liên tục “1+4” tiên tiến quốc tế, được hỗ trợ bởi các thiết bị gia công nhôm hàng đầu ngành như lò nung lại kiểu đẩy. Dự án còn xây dựng hệ thống IoT công nghiệp có khả năng giám sát thời gian thực và điều chỉnh động các thông số sản xuất cốt lõi như lực cán và nhiệt độ, đảm bảo hiệu quả chất lượng ổn định của các sản phẩm nhôm cao cấp và không ngừng nâng cao thị phần các sản phẩm giá trị gia tăng cao.
24 Sep 2026 20:58 (GMT+8)
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
24 Sep 2026 20:58 (GMT+8)
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Đọc thêm
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea có kế hoạch mở rộng hợp tác với Glencore sang lĩnh vực tinh luyện alumina, năng lượng, vàng và kim loại cơ bản, nhằm tăng nguồn thu từ khai khoáng, thúc đẩy chế biến tại chỗ và công nghiệp hóa tài nguyên khoáng sản, đồng thời tăng cường hợp tác với các thị trường và doanh nghiệp khai khoáng quốc tế tại Trung Quốc, Trung Đông và nhiều nơi khác.
24 Sep 2026 20:58 (GMT+8)
Key Takeaway From SMM Metal Industry Annual Conference: Evolvement Of China Aluminum Capacity - Shanghai Metals Market (SMM)