Citigroup and BMI both Lower Aluminium Price Forecast, Price of the Metal Seen Peaking after 2025

Đã xuất bản: May 25, 2023 10:32
According to foreign news on May 23, Fitch Solutions' BMI lowered its forecast for the average price of aluminium this year.

SHANGHAI, May 25 (SMM) – According to foreign news on May 23, Fitch Solutions' BMI lowered its forecast for the average price of aluminium this year, down from the previous $2,600/mt to $2,500/mt.

In its outlook for aluminium prices, it said prices may remain under pressure this year, struggling to return to 2022 highs, as global demand remains weak and domestic supply in China, the world's largest aluminium producer, increases.

Still, BMI expects prices to improve from current levels later this year as China's real estate sector recovers.

In the longer term, BMI expects aluminium prices to remain elevated as demand is underpinned by an accelerated transition to a green economy, while supply remains constrained.

On the demand side, BMI noted aluminium prices were under pressure due to a weaker-than-expected recovery in China's manufacturing sector and weak domestic consumption.

Outside of China, demand in the construction, packaging and automotive sectors will remain weak due to the gloomy global macroeconomic outlook.

The agency therefore expects a fairly modest increase in aluminium demand in developed countries this year, before rebounding in 2024.

On the supply side, BMI expects China's aluminium production to climb 2.2% year-on-year to 40.9 million mt this year and 2.8% in 2022.

Despite weakening demand, inventories are expected to remain tight compared to historical levels this year as China's non-manufacturing sector continues to grow.

In the longer term, aluminium is expected to average $2,700/mt in 2024, up from 2023 levels, as demand rebounds and inflationary pressures ease, BMI said.

In addition, the agency expects aluminium prices to peak at $2,900/mt in the second half of this century as the green energy transition accelerates to support demand for the metal.

After 2025, BMI expects production growth in China to be constrained, helping to narrow the global aluminium glut.

CITI also lowered its price forecast for aluminum in 2023 from $2,561/mt to $2,475/mt.

More popular news:

'Bond King' Jeffrey Gundlach Says Sharp Fed Rate Cuts By Year-End Will Push Up Gold Prices

Copper Shortage Is Irreparable Even after Biggest Mergers and Acquisitions, Here’s Why

Rio Tinto Warns of Risks for Paying High Premiums for Lithium Mines after Plunging Lithium Prices Triggered Acquisition Rush

Goldman Sachs Lowers Price Forecast for Aluminium, Copper in 2023, Sees Nickel Price Plunging

Zinc Prices to Plunge by 2025, Here's Why

World Bank: Global Commodity Prices to Plunge Precipitously This Year at Fastest Speed since Covid Outbreak

G7 to Expand Sanctions Covering Metals on Russia, Promises Further Support for Ukraine

Citigroup Warns European Commercial Real Estate Values Will Plummet 40%, But Sees Medium-Term Opportunity

IMF: US Debt Defaults Will Take a Heavy Toll on Global Economy, Global GDP Growth Can Plunge

Goldman Sachs Warns of Serious Risks US Dollar Will Lose Reserve Currency Status on Debt Ceiling Standoff

BofA Sharply Lowers Forecast for Oil Price, Global Oil Consumption in 2023

UBS Raises China GDP Growth Forecast, Sees Earnings from China Stock Market Soaring, RMB Appreciating

Global Aluminium Inventory to Plunge Further amid Supply Headwinds, LME Aluminium Prices to React Fast

Takeaways of Warren Buffett and Berkshire Hathaway’s 2023 Annual Meeting

High Lithium Ore Prices in Australia will Drive Lithium Prices Rebound, Reasons Prevent Output to Grow

Sharp Output Cuts Led to Lithium Ore Shortages, High Import Prices Drove Lithium Salt Producers to Shut Down

US Treasury Bill Rates Soar to Record High on Debt Ceiling Jitters

No Other Country can Replace China's Manufacturing Industry Including India

SMM Daily Comments (May 9): Most LME Base Metals Closed Lower, SHFE Nickel Prices Plunge, Ferrous Metals Mostly Rose

SMM Daily Comments (May 12): SHFE Base Metals and Silver Prices Crashed, Most LME Base Metals Prices Went Down, Oil Posted 3-Day Losing Streak

SMM Daily Comments (May 16): Most Base Metals Prices Closed with Losses, SHFE Nickel, Stainless Steel Plunge, Oil Gained on G7 New Measures, US Strategic Petroleum Reserve Replenishment and Supply Concerns

SMM Daily Comments (May 17): Most Metals prices Rose, Ferrous Metals Jumped with Coking Coal soaring 3.29%,Oil Went Down on Surprise Inventory Growth, Poor China Economic Data and IEA Doubt on Russia Cheating on Output Cuts

SMM Daily Comments (May 22): Metals Prices Mostly Fell, Zinc Plunged to over 2-Year Low, Coke Slumped, Fears over US Debt Ceiling and China Demand Structural Issues Weigh on Oil

A Bull Gold Market Has Just Begun 

Fitch Ratings Raises Saudi Arabia IDR, Says World Bank Reason and High Dependence on Oil Remain a Weakness for the Country's Rating

Global Key Base Metals Face Supply Glut, Severe Oversupply for Aluminium, But There Is a Global Copper Shortage

Buffett Talks about Banking Crisis and Bank Stocks He Bought, Munger Warned Commercial Real Estate: the City Will Be Seriously Hollowed Out

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
2 giờ trước
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Đọc thêm
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Thị trường phôi nhôm SMM: Trong tháng 7, tỷ lệ vận hành của phôi nhôm tăng 1,1 điểm phần trăm so với tháng trước lên 58,3%, tăng mạnh 5,2 điểm phần trăm so với cùng kỳ năm trước. Hưởng lợi từ diễn biến mạnh của phí gia công phôi nhôm trong quý II...
2 giờ trước
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
10 giờ trước
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Đọc thêm
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Phản hồi theo dõi SMM: Trận động đất mạnh 7,7 độ trên đảo Flores, Indonesia, có tác động tương đối nhỏ đến chuỗi ngành nhôm. Về phân bố công suất, bô-xít, alumin và phần lớn công suất nhôm tập trung ở miền tây Indonesia, nhìn chung cách tâm chấn hơn 1.400 km; ngay cả nhà máy luyện nhôm gần nhất—Sulawesi Morowali Huachin Aluminum—cũng cách khoảng 624 km, vẫn nằm ngoài bán kính thiệt hại 300 km. Cùng với chiều cao sóng thần dưới 0,4 m, cú sốc nguồn cung thực tế gần như bằng không. Về giá, tối đa chỉ có thể xuất hiện một nhịp tâm lý ngắn hạn 0–1%, dự kiến sẽ được triệt tiêu trong 1–3 ngày, không làm thay đổi xu hướng trung hạn
10 giờ trước
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
22 giờ trước
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
Đọc thêm
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
Theo truyền thông Philippines đưa tin ngày 12, Bộ Thương mại và Công nghiệp Philippines (DTI) đang lên kế hoạch thúc đẩy thiết lập chương trình chứng nhận bắt buộc đối với sản phẩm nhôm, theo đó yêu cầu các doanh nghiệp sản xuất trong nước và nước ngoài tại Philippines phải xin trước giấy phép chất lượng và an toàn chính thức của Philippines, đồng thời áp dụng phương thức chứng nhận “một nhà máy, một chứng nhận”.
22 giờ trước
Citigroup and BMI both Lower Aluminium Price Forecast, Price of the Metal Seen Peaking after 2025 - Shanghai Metals Market (SMM)