Impacts of Production Reduction in European Aluminium Smelters on China's Primary Aluminium Imports

Đã xuất bản: Aug 25, 2022 10:06 (GMT+8)
Nguồn: SMM
The sluggish supply and demand of aluminium in Europe failed meet the local terminal demand. Therefore, the demand for imported aluminium semis and aluminium products might increase, boosting the export of relevant products in China and other countries.

SHANGHAI, Aug 25 (SMM) - According to customs data, China imported 51,037.4 mt of primary aluminium in July 2022, a month-on-month increase of 79.1% and a year-on-year decrease of 72%. Imports of primary aluminium from January to July totalled 248,273.2 mt, down 73.2% on the year.

In terms of export, China exported 7,588.5 mt of primary aluminium in July, an increase of 14.6% month-on-month and 1665% year-on-year.

Altogether, China's net imports of primary aluminium stood at 43,448.95 mt in July 2022, up 98.6% from June and down 76.1% from the previous year. The net imports from January to July was 63,987.95 mt, a year-on-year decrease of 93%.

Since the scale of domestic primary aluminium exports was small, and China was actually a net importer of primary aluminium, SMM will focus on the primary aluminium imports in the following analysis.

According to SMM analysis, the main reason for the 79.1% month-on-month increase in domestic primary aluminium imports in July was that aluminium prices at China and abroad both fell sharply in June, with LME aluminium leading the decline. As a result, the domestic import window of aluminium ingot was forced open, and the import losses were narrowed to below 100 yuan/mt, under which circumstances overseas traders took the opportunity to ship cargoes to the Chinese market. In addition, the United States raised interest rates dramatically in July. Amid the downturn of the overseas economy, the overseas demand for aluminium was poor, thus some local suppliers were again focused on domestic consumption.

From the perspective of trade models, general trade accounted for 64.7% of total domestic imports of primary aluminium in July. At the same time, processing trade with supplied/imported materials increased significantly, accounting for 22.1% of the total imports. In particular, imports from Rusal to Hebei and Henan provinces were mainly processing trade with supplied materials.

From the perspective of suppliers, Russia was the top supplier of domestic primary aluminium imports, with a import volume of 39,100 mt, accounting for 76.5% of the total imports. The imported aluminium ingots from India amounted to 4,900 mt, up 390% from June.

SMM expects that domestic primary aluminium imports will maintain a slight growth in August, and the net import volume is estimated to drop to about 30,000 mt. The main reasons behind are provided as follows.

First, both domestic and overseas aluminium prices slumped in July amid the bearish sentiment caused by the US interest rate hikes and the macroeconomic recession. In particular, the prices of domestic aluminium declined further than that of overseas, promoting the SHFE/LME aluminium price ratio to trend lower. As the import losses of primary aluminium expanded in July compared with June, there was no chance for overseas aluminium ingots to flow to China.

Second, the domestic aluminium downstream processing sector was in the off-season in August, and the average operating rate of aluminium processing enterprises stayed low due to high temperatures and power rationing. As a result, the domestic inventory of aluminium accumulated, and the domestic demand for overseas aluminium also weakened.

Looking ahead, the imports between September and December will be greatly affected by the domestic and overseas aluminium prices in August. SMM expects that China will hardly maintain net imports in the future, mainly because the growth rate of domestic aluminium operating capacity has slowed down since August. In addition, 1 million mt of aluminium operating capacity in Sichuan province was suspended due to power rationing. Therefore, the domestic output of aluminium shank in August, easing the pressure on the supply side. However, when the power restriction on downstream enterprises is lifted in the future, there is also possibilities that they will import aluminium to restock. It should also be pointed out that high prices of energy resulting from the energy shortage in Europe have weighted on the output of overseas aluminium smelters and downstream processing enterprises. The sluggish supply and demand of aluminium in Europe failed meet the local terminal demand. Therefore, the demand for imported aluminium semis and aluminium products might increase, boosting the export of relevant products in China and other countries.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
7 giờ trước
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Đọc thêm
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Ngày 20/9, máy cán thô tấm dày thuộc dự án sản xuất thông minh vật liệu mới nhôm công suất 720.000 tấn/năm của Công ty TNHH Công nghệ Vật liệu mới Hà Nam Yirui chính thức đi vào sản xuất. Với tổng vốn đầu tư 1,5 tỷ nhân dân tệ, dự án tận dụng mặt bằng nhà xưởng hiện có để xây dựng dây chuyền cán nóng liên tục “1+4” tiên tiến quốc tế, được hỗ trợ bởi các thiết bị gia công nhôm hàng đầu ngành như lò nung lại kiểu đẩy. Dự án còn xây dựng hệ thống IoT công nghiệp có khả năng giám sát thời gian thực và điều chỉnh động các thông số sản xuất cốt lõi như lực cán và nhiệt độ, đảm bảo hiệu quả chất lượng ổn định của các sản phẩm nhôm cao cấp và không ngừng nâng cao thị phần các sản phẩm giá trị gia tăng cao.
7 giờ trước
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
7 giờ trước
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Đọc thêm
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea có kế hoạch mở rộng hợp tác với Glencore sang lĩnh vực tinh luyện alumina, năng lượng, vàng và kim loại cơ bản, nhằm tăng nguồn thu từ khai khoáng, thúc đẩy chế biến tại chỗ và công nghiệp hóa tài nguyên khoáng sản, đồng thời tăng cường hợp tác với các thị trường và doanh nghiệp khai khoáng quốc tế tại Trung Quốc, Trung Đông và nhiều nơi khác.
7 giờ trước
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
7 giờ trước
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Đọc thêm
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Ngày 21/9, lễ khởi công Giai đoạn II (Dự án A3) của Công ty TNHH Nhôm Đỉnh Phong (Campuchia), công ty con của Tập đoàn Địa Hàng, đã được tổ chức. Tọa lạc tại Đặc khu kinh tế Quốc lộ 6, tỉnh Kampong Cham, Campuchia, Nhôm Đỉnh Phong chủ yếu hoạt động trong lĩnh vực nghiên cứu phát triển và sản xuất thanh nhôm hợp kim cao cấp, nhôm định hình cao cấp và các sản phẩm phụ trợ cho xe năng lượng mới, được trang bị đầy đủ quy trình sản xuất và thiết bị bao gồm nấu chảy, đùn ép, anot hóa, gia công sâu, gia công chính xác và xử lý bề mặt. Khi Giai đoạn II đi vào hoạt động toàn bộ, công suất sản xuất hàng năm sẽ đạt 200.000 tấn, với giá trị sản lượng hàng năm lên tới 700 triệu USD. Giai đoạn II (Dự án A3) được quy hoạch bao gồm xưởng gia công xe năng lượng mới rộng 24.340 m² (nhà kết cấu thép một tầng), xưởng đùn ép rộng 15.291 m² và các công trình phụ trợ như nhà văn phòng, nhà bảo vệ và trạm phân phối điện.
7 giờ trước
Impacts of Production Reduction in European Aluminium Smelters on China's Primary Aluminium Imports - Shanghai Metals Market (SMM)