August Oxide Electrolyte Analysis: How Does the "Solid-Liquid Hybrid Main Engine" Perform Amid Price Divergence?

게시됨: Sep 8, 2026 17:56
In August 2026, oxide electrolytes continued their role as the "main engine for solid-liquid hybrid batteries." LATP prices dropped to just over RMB 90/kg, while LLZO held steady at RMB 638/kg. Unlike sulfide electrolytes, which saw record-high production but a meager capacity utilization rate of just 5.82%, the oxide route。

Key Points: In August 2026, oxide electrolytes continued their role as the "main engine for solid-liquid hybrid batteries." LATP prices dropped to just over RMB 90/kg, while LLZO held steady at RMB 638/kg. Unlike sulfide electrolytes, which saw record-high production but a meager capacity utilization rate of just 5.82%, the oxide route—leveraging process maturity and cost advantages—has taken the lead in large-scale production. LanGu New Energy's 10,000-tonne production line is now fully operational, Xinnuobang's thousand-tonne capacity is set to come online soon, and companies such as Shanghai Xiba and Jiugu Hi-Tech are accelerating capacity build-out and customer deliveries. The Chicago Summit set the tone for "oxides first, sulfides later," positioning oxides as the core enabler of solid-state battery industrialization over the next 2–3 years.

 

I. Price Divergence: LATP's Cost Advantage Stands Out, LLZO Remains High
In August, oxide electrolyte prices showed a "steady vs. declining" divergence. LLZO (lanthanum-zirconium-titanium oxide) held firm at RMB 638/kg throughout the month, while LATP (lithium titanium aluminum phosphate) fell to just over RMB 90/kg thanks to process maturity—less than 15% of LLZO's price. According to SMM data, oxide LATP costs approximately RMB 150,000–200,000/tonne, while LLZO costs RMB 250,000–300,000/tonne.


Behind this price gap lie two distinct strategic positions: LLZO, with its high ionic conductivity and stability toward lithium metal, is the long-term target material for all-solid-state batteries, while LATP, with its cost advantages and mature production processes, has become the preferred choice for commercializing solid-liquid hybrid batteries. The widening price spread in August reflected the market's tiered pricing logic for "near-term scalable" versus "long-term high-performance" solutions.
II. Capacity Build-Out: 10,000-tonne Lines Come Online, Industry Leaps from "Hundred-tonne" to "Ten-thousand-tonne" Scale


The most critical industry event in August was the continued ramp-up of LanGu New Energy's 10,000-tonne production line. On May 31 this year, LanGu New Energy officially launched its annual 10,000-tonne oxide solid-state electrolyte production line in Liyang—the first time domestic oxide solid-state electrolyte capacity has been scaled up from the hundred-tonne to the ten-thousand-tonne level. LanGu has now established a thousand-tonne oxide solid-state electrolyte production line and achieved stable operation of a hundred-tonne all-solid-state battery electrolyte line.
At the same time, Xinnuobang disclosed that its oxide electrolytes have achieved mass production and sales, with thousand-tonne capacity to come online in 2026, to be gradually expanded to ten-thousand-tonne scale. Shanghai Xiba's Songjiang Phase I project has entered trial production, with planned annual capacity of fifty-tonne-scale oxide electrolyte powder, and products have been delivered in batches to multiple leading battery manufacturers. Wuhan Ruishida's thousand-tonne oxide solid-state electrolyte line has also been formally completed. Jiugu Hi-Tech's oxide products achieved pilot-scale production and small-batch supply in 2025, and the company has recently completed scaled capacity build-out with stable batch deliveries now in place.
Unlike the awkward position of sulfide electrolytes—"lines built but operating rates below 6%"—oxide electrolyte capacity build-out and customer deliveries are advancing in tandem, demonstrating a much higher level of industrialization maturity. According to research institutions, China's solid-state electrolyte shipments are expected to reach 6,000 tonnes in 2026, with the oxide route being the undisputed mainstay.
III. International Consensus: "Oxides First" Emerges as Industry Consensus
The most significant industry signal in August came from across the Pacific. The Chicago Solid-State Battery Summit set the tone for "oxides first, sulfides later": oxide electrolytes are to be prioritized for deployment over the next 2–3 years, while all-solid-state sulfide batteries are pushed back to 2028–2030.
This assessment aligns closely with industry realities. Oxide electrolytes are primarily used in solid-liquid hybrid batteries, which have already achieved mass production and vehicle installation—Dongfeng Motor's self-developed oxide-polymer composite solid-state battery delivers 350 Wh/kg and is scheduled for mass vehicle installation in the second half of 2026; Qingtao Energy's Chengdu Phase II 15 GWh project is progressing steadily, with the oxide route as its main focus. Dangsheng Technology's plans also include 2,000 tonnes/year of oxide electrolyte capacity.
IV. Outlook: Oxides Are the "Now" for Solid-Liquid Hybrid and the "Bridge" to All-Solid-State
August's industry landscape clearly delineates the dual role of oxides: In the short term, they are the core material for the commercial-scale deployment of solid-liquid hybrid batteries. LATP's cost advantages and scalable production make it the electrolyte of choice for hybrid solid-liquid batteries (liquid electrolyte mass fraction of 5%–20%). In the long term, they serve as the critical bridge taking all-solid-state batteries from the lab to production lines. LLZO's technological iteration and cost-reduction trajectory are already clear—in 2025, oxide systems achieved a breakthrough in thin-film process cost reduction, with interfacial impedance reduced by 46.8% compared to 2023.
Compared to the early-stage ramp-up of sulfide electrolytes—"70 tonnes of output, 5.82% capacity utilization, and plummeting prices"—oxide electrolytes have already crossed the "from 0 to 1" lab threshold and are steadily advancing on the "from 1 to 100" large-scale journey. 2026 marks the Year Zero for all-solid-state validation, and oxides are the very track on which the first rays of dawn are now visible.

 

**Note:** For further details or inquiries regarding solid-state battery development, please contact:
Phone: 021-20707860 (or WeChat: 13585549799)
Contact: Chaoxing Yang. Thank you!

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[전고체 배터리: ProLogium Technology, 고에너지밀도 전고체 배터리 Gen3.5 양산 돌입… 381Wh/kg 및 903Wh/L 달성]
1시간 전
[전고체 배터리: ProLogium Technology, 고에너지밀도 전고체 배터리 Gen3.5 양산 돌입… 381Wh/kg 및 903Wh/L 달성]
더 보기
[전고체 배터리: ProLogium Technology, 고에너지밀도 전고체 배터리 Gen3.5 양산 돌입… 381Wh/kg 및 903Wh/L 달성]
[전고체 배터리: ProLogium Technology, 고에너지밀도 전고체 배터리 Gen3.5 양산 돌입… 381Wh/kg 및 903Wh/L 달성]
[전고체 배터리: ProLogium Technology, 381 Wh/kg 및 903 Wh/L에 달하는 고에너지밀도 전고체 배터리 Gen3.5 양산] 2026년 9월 2일, ProLogium Technology는 최신 Gen3.5 리튬 세라믹 배터리(LCB)가 대만의 기가급 산업 플랫폼에서 양산에 돌입했다고 발표했다. 제3자 TÜV 시험 보고서에 따르면, 185.4 Ah 대형 셀은 903 Wh/L의 부피 에너지밀도와 381 Wh/kg의 중량 에너지밀도를 달성했으며, GB/T43568-2026 표준에 따라 전고체 배터리로 분류된다. 10년 이상의 상업적 양산 경험과 3세대 생산라인에 걸쳐 구축된 확장 가능한 기가급 제조 플랫폼을 기반으로, 전기차 및 기타 고성능 응용 분야의 경량화, 주행거리, 급속 충전 요구를 충족하며, Gen4 전무기 전해질 시스템으로 확장될 예정이다. 2024년 1월 23일, 대만 타오위안 기지는 42억 대만달러(약 9억 6천만 위안)를 투자하여 첫 생산라인을 구축하고 전고체 배터리 생산을 시작했다. 초기 생산능력은 연간 0.5 GWh로 전기차 14,000대에 충분하며, 최종 규모는 2 GWh이다.
1시간 전
황화물계 전고체 전지의 고압 과제를 극복하는 방법—글로벌 기술 경로 심층 분석 [SMM 분석]
2026년 9월 7일 08:49
황화물계 전고체 전지의 고압 과제를 극복하는 방법—글로벌 기술 경로 심층 분석 [SMM 분석]
더 보기
황화물계 전고체 전지의 고압 과제를 극복하는 방법—글로벌 기술 경로 심층 분석 [SMM 분석]
황화물계 전고체 전지의 고압 과제를 극복하는 방법—글로벌 기술 경로 심층 분석 [SMM 분석]
[SMM 분석: 황화물계 전고체 전지의 고압 과제를 극복하는 방법 — 글로벌 기술 경로 심층 분석] 2026년 9월 1일, 중국 제일자동차(FAW)는 동방이공대학과 협력하여 황화물계 전고체 전지의 저압 작동 분야에서 중대한 기술적 돌파구를 마련했다. 관련 성과는 국제 최고 학술지인 Advanced Energy Materials에 "이온-엘라스토머 계면을 통한 저압·고안정성 전고체 전지 구현"이라는 제목으로 게재되었다. 전고체 전지가 일반적으로 20MPa 이상의 작동 압력을 필요로 한다는 업계 난제를 해결하기 위해, 양측은 재료 형상 제어, 저압 셀 구조 설계 및 제조 공정 최적화를 통해 5MPa의 저압 조건에서 대용량 황화물계 전고체 전지 셀의 안정적인 사이클링을 구현하는 데 성공했다. 이번 돌파구는 황화물계 전고체 전지의 실용화에 필수적인 핵심 기술에서 중국이 한 걸음 더 나아갔음을 의미한다.
2026년 9월 7일 08:49
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
2026년 9월 4일 13:47
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
더 보기
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업 적합성 판정 실시한 바 없다고 밝혀] 2026년 9월 4일, 중국자동차기술연구센터(CATARC) 수석과학자 왕팡은 '2026 세계 동력 배터리 컨퍼런스'에서 최근 루머에 대해 해명했다. CATARC는 전고체 배터리 기업에 대해 어떠한 판정도 실시한 바 없으며, 관련 루머는 "허위 정보"라고 밝혔다. 최근 시장에서는 CATARC가 올해 7월부터 시행된 국가표준 GB/T 43568-2026 '전기자동차용 전고체 배터리 – 제1부: 용어 및 분류'에 근거하여 전고체 배터리 관련 320여 개 기업을 대상으로 판정을 실시했으며, 최종적으로 모든 적합성 항목을 완전히 통과한 기업은 9곳에 불과하다는 보도가 나온 바 있다.
2026년 9월 4일 13:47
August Oxide Electrolyte Analysis: How Does the "Solid-Liquid Hybrid Main Engine" Perform Amid Price Divergence? - Shanghai Metals Market (SMM)