Under Cost Pressure, 304 Stainless Steel Cold Rolling Profit Remains Unpromising

게시됨: Mar 14, 2025 17:20
출처: SMM
This week (March 10–March 14), the cost of 304 stainless steel cold-rolled coil rose from 13,450 yuan/mt at the beginning of the week to 13,650 yuan/mt, mainly due to the increase in raw material prices driving up production costs. As a result, bullish sentiment surged in the spot market, with spot prices rising from 13,300 yuan/mt to 13,420 yuan/mt. However, the price increase was far less than

SMM, March 14,

This week (March 10–March 14,2025),the 304-series stainless steel cold-rolled market faced severe challenges. The rising ferronickel prices imposed significant cost pressure on the 304 market.

At the beginning of the week, costs were stable at 13,450 yuan/mt, but within just one week, they surged to 13,650 yuan/mt by the weekend. This sharp increase was primarily driven by the continuous rise in the prices of key raw materials, which pushed production costs higher like an unbridled horse. As a result, bullish sentiment in the spot market was fully ignited, reaching unprecedented levels. Spot prices also climbed from an initial 13,300 yuan/mt to 13,420 yuan/mt by the end of the week. However, it is evident that compared to the significant surge in costs, the price increase was relatively minor and limited.

In terms of profitability, the profit margin for 300-series stainless steel stood at -1.3% at the beginning of the week. After a brief rise, it declined further, reaching -1.7% by the weekend, indicating worsening losses. This data clearly shows that the rate of cost increase far outpaced the rate of price growth. Despite multiple price hikes by steel mills in an attempt to alleviate cost pressure, downstream customers showed low acceptance of high-priced products, and purchase transactions fell short of expectations, making it difficult for price increases to be smoothly passed down the supply chain.

Therefore, this week, the surge in the cost of 304-series stainless steel cold-rolled coils was particularly pronounced, while the price increase was negligible in comparison, failing to bridge the significant gap caused by rising costs. Consequently, the sharp decline in profit margins became inevitable. Improvement in profitability depends on a substantial increase in downstream demand.

Next week: Costs are expected to remain high, with hopes for a turnaround in the downstream market.

If you have any questions, please feel free to contact Chaoxing Yang at 13585549799 (same as WeChat).

》Click to View SMM Stainless Steel Spot Historical Prices

》Click to View SMM Stainless Steel Industry Chain Database

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
9월 초 몰리브덴 시장 줄다리기 심화, 공급 제약 강화 【SMM 몰리브덴 분석】
17분 전
9월 초 몰리브덴 시장 줄다리기 심화, 공급 제약 강화 【SMM 몰리브덴 분석】
더 보기
9월 초 몰리브덴 시장 줄다리기 심화, 공급 제약 강화 【SMM 몰리브덴 분석】
9월 초 몰리브덴 시장 줄다리기 심화, 공급 제약 강화 【SMM 몰리브덴 분석】
【SMM 몰리브덴 분석】 SMM 9월 3일 뉴스: 8월 중국 몰리브덴 시장은 비교적 타이트한 공급과 강성 수요의 지지 속에 긴축 균형을 유지했다. 전체 가격은 상승 후 안정세를 보이며 고점에서 공고히 다져졌다. 45% 몰리브덴 정광은 8월 19일~25일 사이 5,455위안/mtu까지 급등하며 3년래 최고가 범위를 확고히 유지했다. 이와 동시에 현물 60% 페로몰리브덴 가격도 상승을 이끌어 8월 24일~25일 344,000위안/t의 단계적 고점을 기록했다.
17분 전
[속보 | 칠레 광업생산지수, 7월 전년 대비 7.2% 하락… 금속광업 10.7% 감소]
7시간 전
[속보 | 칠레 광업생산지수, 7월 전년 대비 7.2% 하락… 금속광업 10.7% 감소]
더 보기
[속보 | 칠레 광업생산지수, 7월 전년 대비 7.2% 하락… 금속광업 10.7% 감소]
[속보 | 칠레 광업생산지수, 7월 전년 대비 7.2% 하락… 금속광업 10.7% 감소]
8월 31일 칠레 통계청(INE)은 7월 산업생산지수가 전년 동기 대비 5.1% 하락했다고 발표했다. 이 중 광업생산지수(IPMin)는 7.2% 감소했으며, 금속 광업은 10.7% 줄어 지수를 9.301%포인트 끌어내렸는데, 이는 주로 구리 채굴 및 가공 감소에 기인한다. USGS 데이터에 따르면 칠레는 2025년 전 세계 몰리브데넘 생산량의 약 16%를 차지했다. 최근 칠레 구리-몰리브데넘 광산의 생산량 손실은 선광 단계에 집중되어 있어 부산물인 몰리브데넘이 구리보다 더 큰 타격을 받았으며, 이에 따라 2026년 전 세계 몰리브데넘 공급에 영향이 미칠 것으로 예상된다.
7시간 전
[SMM 스테인리스 일일 리뷰] SHFE 니켈 상승에 힘입은 SS 선물 반등 실패, 스테인리스 현물 거래 여전히 부진
2026년 9월 1일 15:16
[SMM 스테인리스 일일 리뷰] SHFE 니켈 상승에 힘입은 SS 선물 반등 실패, 스테인리스 현물 거래 여전히 부진
더 보기
[SMM 스테인리스 일일 리뷰] SHFE 니켈 상승에 힘입은 SS 선물 반등 실패, 스테인리스 현물 거래 여전히 부진
[SMM 스테인리스 일일 리뷰] SHFE 니켈 상승에 힘입은 SS 선물 반등 실패, 스테인리스 현물 거래 여전히 부진
[SMM 스테인리스 일일 리뷰] SS 선물, SHFE 니켈 강세에도 반등 실패; 스테인리스 현물 거래 여전히 부진 SMM 9월 1일 보도에 따르면, SS 선물은 전일 하락세를 이어가며 추가 하락했고, 저점은 일시적으로 13,775위안/톤까지 밀렸다. SHFE 니켈 강세에 힘입어 반등 시도로 장을 시작했으나, 선물은 이후 다시 하락 전환했다. 마감 시 주력 SS 계약은 13,825위안/톤으로 정산되었다. 현물 시장에서는 SS 선물이 계속 하락했고, 주류 스테인리스 제강사의 에이전트가 호가를 추가 인하하면서 스테인리스 현물 가격을 끌어내렸다. "가격 상승 시 추격 매수, 하락 시 관망" 심리 속에 전반적인 거래는 여전히 부진했다. SS 선물 주력 계약. 오전 10시 15분 기준 SS2610은 13,895위안/톤으로 전 거래일 대비 30위안 상승했다. 우시 지역 304/2B 현물 프리미엄은 475~875위안/톤 범위였다. 현물 시장에서 우시 냉연 201/2B 코일 평균 가격은 보합이었다. 냉연 밀엣지 304/2B 코일의 경우 우시 평균 가격은 100위안/톤 하락했고, 포산 평균 가격은 75위안/톤 하락했다. 우시 냉연 316L/2B 코일 가격은 보합이었고, 우시 열연 316L/NO.1 코일 호가도 보합이었다. 우시와 포산의 냉연 430/2B 코일 모두 보합이었다. 이번 주 스테인리스 선물은 전반적으로 약세 이탈 흐름을 보였으며, 변동성이 확대되고 가격 중심이 지속적으로 하향 이동했다. 주중 선물은 침체된 모습을 보였다. 주 중반, 중국 동부 지역의 니켈 선철 제련 라인에서 예상치 못한 안전사고가 발생하면서 일시적으로 공급 우려가 제기되어 단기적인...
2026년 9월 1일 15:16
Under Cost Pressure, 304 Stainless Steel Cold Rolling Profit Remains Unpromising - Shanghai Metals Market (SMM)