Will PV Glass Reduce Production? Latest Industry Operating Statistics [SMM Analysis]

게시됨: Sep 03, 2024 16:50 (GMT+8)
출처: SMM
As September arrives, domestic PV glass prices have fallen again.

As September arrives, domestic PV glass prices have fallen again. Against the backdrop of declining industry profits and weakening demand, the PV glass industry has entered a period of overall losses. Following the losses and a decrease in order volumes, some domestic glass companies have recently accelerated their entry into the cold repair period, and the reduction in kiln production has become more severe since August.

In September, domestic PV glass prices fell again. The price of 2.0mm single-layer coated glass has dropped to 12.5 yuan/square meter. Under the pressure of high inventory, it is expected that companies' willingness to offer discounts will only increase, and transaction prices are likely to decrease slightly. According to SMM cost calculations, the current glass industry has reached the stage of full industry loss in terms of total cost and is approaching the cash cost line of full industry loss. With the increasing scope of losses and no improvement in demand, the willingness to operate has begun to decline.

In August, two more kilns in China entered cold repair, with a combined capacity of 750 mt/day. Besides cold repairs, many companies started reducing kiln production in August.

In August, a total of 12 kilns in China began reducing production, with a total kiln capacity of 10,110 mt/day, accounting for about 9.59% of the total operating capacity. This resulted in a capacity reduction of 2,909 mt/day, and the expected supply reduction has increased.

Recently, there have been rumors in the glass market that glass companies will collectively enter a phase of cold repair and production reduction, leading to a 30% decrease in production. SMM has learned that there is no collective effect; most of the kilns reducing production belong to companies with relatively smaller total capacities. Major companies have fewer production reduction operations, and some of the major companies' cold repair capacities are planned for kilns reaching their normal cold repair stage. Additionally, the subsequent cold repair and production reduction kilns are limited. The supply in China in September is still slightly surplus, with limited impact. However, it is expected that with some companies' maintenance and production reductions, the domestic supply side will enter a recovery phase. During this phase, glass demand will also slightly increase due to year-end installations, and glass inventory will begin to decrease slightly.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
중국, 태양광 기술 수출 통제 강화 제안: 중국 외 지역의 향후 전망은? [SMM 분석]
6시간 전
중국, 태양광 기술 수출 통제 강화 제안: 중국 외 지역의 향후 전망은? [SMM 분석]
더 보기
중국, 태양광 기술 수출 통제 강화 제안: 중국 외 지역의 향후 전망은? [SMM 분석]
중국, 태양광 기술 수출 통제 강화 제안: 중국 외 지역의 향후 전망은? [SMM 분석]
10월 16일, 중국 상무부(MOFCOM)와 과학기술부는 수출 금지·제한 기술 목록 개정안과 해당 기술에 대한 임시 수출 전 등록 요건을 발표했다. 태양광 분야는 폴리실리콘, 웨이퍼, 셀 제조를 아우르는 12개 기술이 포함된다. 이러한 기술이 적용된 특정 핵심·중요 장비도 적용 범위에 포함된다.
6시간 전
[SMM 분석] 은 가격, 고점 대비 약 20% 하락: 태양전지 가격은 왜 따라가지 않을까?
7시간 전
[SMM 분석] 은 가격, 고점 대비 약 20% 하락: 태양전지 가격은 왜 따라가지 않을까?
더 보기
[SMM 분석] 은 가격, 고점 대비 약 20% 하락: 태양전지 가격은 왜 따라가지 않을까?
[SMM 분석] 은 가격, 고점 대비 약 20% 하락: 태양전지 가격은 왜 따라가지 않을까?
은 가격이 8월 27일부터 10월 15일까지 19.6% 하락하며 태양전지 원가를 낮췄지만, 셀 가격은 안정세를 유지했다. SMM 데이터에 따르면 210R 가격은 0.310위안/W로 보합세를 보였고, 210N 가격은 상승했으며 183 가격은 소폭 하락했다. 생산라인 업그레이드와 감산으로 공급이 타이트해진 가운데, 수출 주문과 대규모 발전소 수요가 주요 포맷을 뒷받침했다. 단기 가격은 수급 펀더멘털에 의해 계속 좌우될 전망이다.
7시간 전
[SMM PV 플래시] 시그에너지, 국가급 정밀·특화 '리틀 자이언트' 기업 선정!
11시간 전
[SMM PV 플래시] 시그에너지, 국가급 정밀·특화 '리틀 자이언트' 기업 선정!
더 보기
[SMM PV 플래시] 시그에너지, 국가급 정밀·특화 '리틀 자이언트' 기업 선정!
[SMM PV 플래시] 시그에너지, 국가급 정밀·특화 '리틀 자이언트' 기업 선정!
최근 시그에너지 신에너지의 자회사인 상하이 시그에너지 인텔리전트 테크놀로지 유한회사가 중국 공업정보화부의 인정을 받아 국가급 정밀·전문 '리틀 자이언트' 기업 명단에 포함되었다. 이번 인정은 PV+ESS+충전 분야에서 시그에너지의 독자적인 혁신 역량, 핵심 기술력 및 시장 경쟁력에 대한 국가 차원의 공식 인증이다.
11시간 전