SMM Morning Comments (Jun 27): Base Metals Closed Mostly with Losses over Deep Worries over Potential Economic Recession

Publicado: Jun 27, 2022 10:00 (GMT+8)
SHFE and LME base metals closed mostly with losses as poor economic data and the strengthening of the US dollar and pessimistic expectations of the global economic outlook caused by the Fed's interest rate hike led to the falling metals prices.

SHANGHAI, Jun 27 (SMM) – SHFE and LME base metals closed mostly with losses as poor economic data and the strengthening of the US dollar and pessimistic expectations of the global economic outlook caused by the Fed's interest rate hike led to the falling metals prices.

LME copper lost 0.18%, aluminium dropped 0.73%, lead fell 0.13%, and zinc slid 4.21%.

SHFE copper lost 1.52%, aluminium fell 0.7%, lead shed 0.17%, and zinc slid 4.87%.

Copper: LME copper opened at $8,293.5/mt last Friday, and once rose to $8,435/mt after falling to $8,122.5/mt. At last, the prices closed at $8,322/mt, down by $15/mt, or 0.18%. Trading volume was 24,500 lots, and open interest stood at 229,000 lots.

The most-traded SHFE 2208 copper contract opened at 63,300 yuan/mt last Friday, and once rebounded to 64,350 yuan/mt after dropping to 61,620 yuan/mt. At last, the prices closed at 63,450 yuan/mt, down 1.52%. The trading volume was 15,400 lots, and open interest stood at 143,000 lots.

On the macro front, LME copper recorded its biggest weekly decline this year last week, falling by more than 6.5%. The initial PMI of the Markit manufacturing industry in the US in June, announced last Friday, recorded 52.4, a 23-month low, which was significantly lower than the expected 56. Poor economic data and the strengthening of the US dollar and pessimistic expectations of the global economic outlook caused by the Fed's interest rate hike led to the falling copper prices. The market shall pay attention to China's official manufacturing PMI, comprehensive PMI, and steel PMI, which will be released on June 30, and the Fed Chairman Powell's speech at the European Central Bank Forum on June 29. If the argument that the Fed hawks will raise interest rates in the future continues, it may continue to suppress commodity prices.

In the spot market, on the last trading day before the delivery of long-term orders in June, the trading of the market picked up. Besides, the futures prices have been falling for nearly 10 trading days, and the premiums stabilised at around 100 yuan/mt supported by the downstream’s purchasing on dips. In the semi-annual settlement cycle this week, traders will mainly intend to gain cash, and the premiums may hardly rise. In addition, the downstream restocking demand is poor, and the inflow of overseas sources suppresses the spot premiums to a certain extent.

LME copper will trade between $8,320-8,420/mt today; SHFE copper prices are expected to move between 63,600-64,400 yuan/mt. Spot premiums are likely to fluctuate between 90-180 yuan/mt.

Aluminium: The most-traded SHFE 2207 aluminium contract opened at 19,040 yuan/mt at last Friday’s night session, with its low and high at 18,705 yuan/mt and 19,225 yuan/mt before closing at 18,970 yuan/mt, down 135 yuan/mt or 0.7%.

LME aluminium opened at $2,468/mt last Friday and closed at $2,450/mt, down $18/mt or 0.73%.

The current macro environment is pessimistic, and commodity prices remain weak. SHFE aluminium fell again amid pessimism, and transactions in the spot market were sluggish. SHFE aluminium will meet resistance at around 19,600 yuan/mt. However, the potential boost to consumer confidence due to various stimulus policies and cost support may allow aluminium prices to rally. SHFE Aluminium is expected to move between 18,900-19,600 yuan/mt on Monday.

Lead: LME lead ended 0.13% lower at $1,939.5/mt on June 24 after ranging between $1,900.5/mt and $1,962.5/mt. The open interest increased by 2,190 lots to 91,363 lots.

The most-traded SHFE lead 2208 contract ended 0.17% lower at 14,940 yuan/mt on June 24 after opening at 14,825 yuan/mt and hitting a low of 14,800 yuan/mt. The open interest increased by 1,087 lots to 57,380 lots.

Zinc: LME zinc closed at $3,346/mt last Friday, down $147/mt or 4.21%. The open interest added 170 lots 201,000 lots. LME zinc is expected to move between $3,320-3,370/mt today. Overnight LME inventory fell 725 mt to 79,175 mt, down 0.91%. The metals market was suppressed by worries over slowing economic development in light of high inflation.

The most traded SHFE 2208 zinc contract closed at 23,330 yuan/mt last night, down 1,195 yuan/mt or 4.87% overnight. The open interest rose 1,872 lots to 111,000 lots. SHFE zinc is expected to move between 23,000-23,500 yuan/mt, and domestic Shuangyan zinc in premiums of 70-90 yuan/mt over SHFE 2207 contract. On the whole, though the supply tightness remained unchanged, zinc ingot social inventory across seven major markets were still falling. However, metals prices dropped on worries over US inflation and potential economic recession. And zinc prices could hardly manage a rally before the macro sentiment cools down.

Tin: The domestic tin ingot social inventories fell slightly last week, but the decline somehow fell short of expectations in light of the concentrated maintenance by smelters. LME tin inventories did not change much. The fact that LME tin underperformed SHFE tin allowed the import profit window to open. The most-traded SHFE tin contract fell below 200,000 yuan/mt at last Friday’s night session. However, the contract closed at above 200,000 yuan/mt as more bulls entered. The open interest was significantly reduced. Under the support of maintenance-driven destocking, SHFE tin will probably rebound following continuous sharp decline.

Nickel: Recently, the sharp drop in nickel prices has attracted market attention. Due to the Fed's interest rate hikes and the shrinking of the balance sheet on June 9, the nickel prices kept falling. On the evening of June 22, Fed Chairman Powell made a speech at the Senate Banking Committee, saying that the future tightening monetary policy may continue, so the negative impact on the non-ferrous metals prices will be further aggravated. On the supply side, influenced by the resumption of production of refined nickel by domestic nickel sulphate producers, domestic pure nickel output increased slightly, and imports of overseas pure nickel spots remained profitable, so the supply of pure nickel improved significantly from February and March. Besides, the Indonesian NPI and intermediate products production line will continue to be put into production, which may restrain the demand for pure nickel in the future. On the demand side, although the pandemic in Foshan and Wuxi has eased and the spot transaction of stainless steel has improved, the low proportion of pure nickel used in stainless steel production cast a limited impact on nickel prices. As for the alloy, electroplating and battery, due to the sharp drop in nickel futures prices, the purchasing volume of the alloy increased. The spot trading was slack in recent days due to the procurement cycle and other problems even though the futures prices were low. To sum up, at present, the demand for pure nickel is weak, while the supply is expected to be sufficient, thus the long-term nickel prices may remain rangebound with some downward potential.

[Disclaimer: The above representation and data is based on market information SMM believes to be reliable at the time of acquiring as well as the comprehensive assessment by SMM research team, and any and all information provided in this article is for reference only. This article does not constitute a direct recommendation for investment or any decisions in any form and clients shall act on their own discreet and any decisions made by clients are not within the responsibility of SMM.]


Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
Los productores de cobre de la India piden una reducción del GST ante el aumento de la carga de capital circulante por los precios récord
hace 1 hora
Los productores de cobre de la India piden una reducción del GST ante el aumento de la carga de capital circulante por los precios récord
Leer más
Los productores de cobre de la India piden una reducción del GST ante el aumento de la carga de capital circulante por los precios récord
Los productores de cobre de la India piden una reducción del GST ante el aumento de la carga de capital circulante por los precios récord
Los productores indios de cobre buscan una reducción del GST al 5 % desde el 18 %, citando el aumento de los requisitos de capital de trabajo en medio de precios récord del cobre.
hace 1 hora
La escasez de ácido sulfúrico surge como una limitación para el crecimiento del cobre en Zambia
hace 5 horas
La escasez de ácido sulfúrico surge como una limitación para el crecimiento del cobre en Zambia
Leer más
La escasez de ácido sulfúrico surge como una limitación para el crecimiento del cobre en Zambia
La escasez de ácido sulfúrico surge como una limitación para el crecimiento del cobre en Zambia
La escasez de ácido sulfúrico en Zambia se está convirtiendo en una limitación creciente para la producción y refinación de cobre. Jubilee Metals informó que los costos del ácido aumentaron más del 200 % en el cuarto trimestre del año fiscal 2026, mientras que la producción de cátodos de Sable cayó a 250 toneladas desde las 361 toneladas del tercer trimestre. Los datos gubernamentales también mostraron una caída interanual del 35,2 % en la producción de cobre a pequeña escala en el primer semestre de 2026, lo que evidencia la exposición del sector a la escasa disponibilidad de ácido y a los mayores costos de procesamiento.
hace 5 horas
Selkirk Copper apunta a reiniciar la mina Minto en el segundo semestre de 2028 tras una EAP positiva
hace 6 horas
Selkirk Copper apunta a reiniciar la mina Minto en el segundo semestre de 2028 tras una EAP positiva
Leer más
Selkirk Copper apunta a reiniciar la mina Minto en el segundo semestre de 2028 tras una EAP positiva
Selkirk Copper apunta a reiniciar la mina Minto en el segundo semestre de 2028 tras una EAP positiva
Selkirk Copper Mines ha delineado un posible reinicio de la antigua mina productora de cobre, oro y plata Minto en Yukón, Canadá, tras la finalización de una Evaluación Económica Preliminar (PEA) que respalda la primera producción de concentrado en el segundo semestre de 2028. La PEA contempla una vida útil de la mina de 13 años basada en una combinación de minería a cielo abierto y subterránea, con operaciones diseñadas en torno a una tasa promedio de extracción y molienda de 4.100 toneladas métricas por día. En su pico de producción, se espera que el proyecto genere aproximadamente 27.200 toneladas métricas anuales de cobre equivalente contenido en concentrado, lo que equivale a unas 48.700 toneladas métricas anuales de concentrado de alta ley de cobre, oro y plata. El capital inicial necesario para restablecer la producción se estima en 186 millones de dólares canadienses. Utilizando los precios de planificación del estudio de 5,00 dólares estadounidenses por libra de cobre, 3.600 dólares por onza de oro y 50 dólares por onza de plata, la PEA estima un valor actual neto después de impuestos con una tasa de descuento del 7% de 494 millones de dólares canadienses, una tasa interna de retorno después de impuestos del 47,8% y un período de recuperación de aproximadamente 1,9 años desde la primera producción. Minto se beneficia de una infraestructura existente considerable de sus operaciones anteriores, incluida una planta de procesamiento de 4.100 toneladas métricas por día, así como infraestructura existente a cielo abierto y subterránea. Selkirk Copper señaló que las evaluaciones de la infraestructura y los equipos existentes del sitio determinaron que la mayoría se encuentra en buen estado de funcionamiento y solo requiere atención y reacondicionamiento menores. La empresa apunta a la primera producción de concentrado en el segundo semestre de 2028, seguida del aumento completo de la extracción, molienda y producción de concentrado para el primer semestre de 2029. Está previsto que un estudio de factibilidad comience en el cuarto trimestre de 2026, y también se espera presentar solicitudes de permisos modificadas durante ese trimestre. Selkirk Copper indicó que la decisión de reinicio está prevista tras la finalización del estudio de factibilidad y la recepción de las modificaciones de permisos en el segundo semestre de 2027. La PEA de Minto describe una vía potencial para que una operación de cobre que anteriormente producía regrese al mercado para 2028, respaldada por la infraestructura existente de procesamiento y minería que podría reducir los requisitos de capital y construcción en comparación con un proyecto nuevo. Sin embargo, la cifra de producción máxima de 27.200 toneladas métricas anuales representa cobre equivalente contenido en concentrado y no solo cobre contenido. El reinicio también sigue sujeto a trabajos de factibilidad adicionales, permisos y ejecución del proyecto, lo que hace que el avance hacia una decisión de reinicio en el segundo semestre de 2027 sea un hito importante a seguir.
hace 6 horas