SMM copper price review and forecast

Đã xuất bản: Jun 3, 2024 17:13
At the beginning of last week, new policies were introduced in China’s real estate sector, and favorable policies for the housing market pushed up SHFE base metals prices, with the most-traded SHFE copper contract touching a high of 85,880 yuan/mt. On Thursday, SHFE base metals prices declined.

At the beginning of last week, new policies were introduced in China’s real estate sector, and favorable policies for the housing market pushed up SHFE base metals prices, with the most-traded SHFE copper contract touching a high of 85,880 yuan/mt. On Thursday, SHFE base metals prices declined. The short squeeze in COMEX copper dissipated as LME copper inventories continued to increase, narrowing the price spread between the COMEX most-traded copper contract and the LME 3-month copper contract. Negative feedback from the demand side became prominent, with LME copper price falling all the way to around $10,000/mt, and the most-traded SHFE copper contract falling below 83,000 yuan/mt. The US Fed released the Beige Book on economic conditions, predicting moderate goods price increases. Fed officials remained cautious about future rate cuts, and US Treasury yields rebounded. However, due to the continued slowdown in inflation, the market still expects one rate cut within the year.

In the eurozone market, the April unemployment rate fell more than expected, boosting market confidence. The ECB is likely to cut rates this week, and the euro's rise against the dollar pushed the US dollar index higher, putting further pressure on copper prices. In the Chinese market, the State Council issued new policies to strictly control new smelting capacities for copper and alumina, but the market had already priced in this, providing limited support for copper prices.

On the fundamentals side, the downward trend in copper concentrate TCs temporarily slowed. Domestic smelters, which had been active in exports previously, gradually delivered cargoes to warehouses. Inventories in LME Asian warehouses accumulated over 8,000 mt during the week, and the SHFE/LME copper price ratio showed signs of recovery, with trade in the imported copper market picking up. Spot premiums in Shanghai first declined and then rose during the week. At the beginning of the week, with high copper prices, domestic inventories continued to accumulate by 19,000 mt. After the mid-week price decline, downstream orders significantly improved. Due to a bearish sentiment, sellers were holding back goods and raising prices, with spot discounts returning to below 200 yuan/mt.

This week, several countries will release the final PMI for May. Before the ECB rate cut decision and the release of US unemployment and non-farm payrolls data, the market is expected to remain cautious. However, the current resilience of inflation will keep the US dollar index running high. Under bearish sentiment, copper prices may fall, with LME copper expected to trade between $10,000-10,300/mt and SHFE copper between 80,500-83,500 yuan/mt. In the spot market, as copper prices fall, the contango of the SHFE front-month contract against the next-month contract will narrow. With increased downstream purchasing sentiment, sellers may raise their offers. Spot discounts against the SHFE 2406 contract are expected to be between 200-50 yuan/mt.

The SMM copper price forecasting model predicts the price range for the most-traded copper contract's closing price to be [83,925, 90,555], with an average of 86,660 yuan/mt. The unit is yuan/mt. The extreme price range is [81,920, 92,310], the normal price range is [83,260, 91,140], and the conservative price range is [84,590, 89,970]. Price is expected to be sideways or consolidate weakly. The support range is [83,260, 84,590], and the resistance range is [89,970, 91,140].

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
12 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
12 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
12 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
12 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
14 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
14 giờ trước