SMM Morning Comment For SHFE Base Metals On May 29

Đã xuất bản: May 29, 2024 10:05
Nguồn: SMM
Overnight, LME copper opened at $10,456/mt, rose to $10,563.5/mt at the beginning of the session, then dropped to a low of $10,440.5/mt.

SHANGHAI, May 29 (SMM) –

Copper

Overnight, LME copper opened at $10,456/mt, rose to $10,563.5/mt at the beginning of the session, then dropped to a low of $10,440.5/mt. It finally rebounded to close at $10,499/mt. Overnight, the most-traded SHFE copper contract opened at ¥84,870/mt, rose to ¥85,330/mt at the beginning of the session, then dropped to a low of ¥84,130/mt. It finally rebounded to close at ¥84,650/mt, with a decline of 0.12%. Trading volume reached 78,000 lots, and open interest reached 20,600 lots. On the macro level, US Fed officials made hawkish remarks, indicating that the possibility of an interest rate hike is very low but not excluded, putting some pressure on copper prices. Domestically, the National Financial Regulatory Administration stated that it will meet the reasonable financing needs of real estate projects and strongly support the construction of affordable housing and other "three major projects." Meanwhile, Guangzhou and Shenzhen have also adjusted the down payment ratio for first-time homebuyers, canceling or lowering the interest rate floor. On the fundamentals side, in terms of supply, the inflow of imported goods increased significantly during the week, and sellers' cargoes also increased. It is reported that some warehouses in Shanghai are nearly full, and some sellers are adjusting prices to sell, but due to the rebound in copper prices, consumption has not seen a significant increase. Overall, the US dollar index dropped slightly, but favorable domestic real estate policies have boosted copper prices, which are expected to remain strong.

Aluminum

The most-traded SHFE 2407 aluminum contract opened at 21,250 yuan/mt overnight, reaching a high of 21,300 yuan/mt, a low of 21,125 yuan/mt, and closed at 21,205 yuan/mt, up 20 yuan/mt or 0.09%. LME aluminum opened at $2,667/mt in the previous trading session, reaching a high of $2,741.5/mt, a low of $2,667/mt, and closed at $2,732/mt, up $74/mt or 2.78%.

Summary: On the macro front, the US Fed took a hawkish stance again mid-week, but due to the impact of geopolitical tensions and a weakening US dollar, the external macro performance remained bullish. The China-Japan-South Korea leaders' meeting resumed after four-and-a-half-year, and multiple provinces and cities in China implemented new real estate policies, boosting expectations of a real estate recovery. On the fundamentals, domestic aluminum operating capacity continued to increase during the week, with good progress in resuming production in Yunnan, which is expected to be completed in June. Supply pressure may gradually become prominent, with aluminum ingot inventories continuing to accumulate, and high aluminum prices inhibiting inventory consumption. However, LME aluminum inventories fell slightly from highs. During the week, spot alumina prices continued to rise, domestic aluminum costs continued to climb, and the import window remained closed, which may provide some support for aluminum prices. However, from the demand, recent aluminum prices hit a record high for the year and showed strong volatility, inhibiting downstream delivery enthusiasm and leading to a decline in orders and operating rates for aluminum processing enterprises. In addition, the current stage is the transition from the off-season to the peak season, and orders from multiple sector show signs of a slight decline. The subsequent comprehensive operating rate is expected to weaken. SMM predicts that aluminum prices will hover around the current level in the short term.

Lead

Overnight, LME lead opened at $2,307/mt, rising to a high of $2,351/mt, and finally dropped slightly before closing at $2,335.5/mt, up $30.5/mt, or 1.32%. Overnight, the most-traded SHFE lead contract opened at ¥18,870/mt, rose to ¥18,975/mt at the beginning of the session, then dropped to a low of ¥18,795/mt, and finally rebounded to close at ¥18,890/mt, up ¥85/mt, or 0.45%.

Zinc

Overnight, LME zinc opened at $3,071.5/mt, initially fluctuated around the average daily line, then rose to $3,095/mt during the European session, and finally surged to a high of $3,133/mt during the night session, before slightly retreating and closing at $3,119/mt, up $60.5/mt, or 1.98%. Trading volume increased to 6,982 lots, and open interest increased by 682 lots to 237,000 lots.

Overnight, LME inventory decreased by 25 tons to 257,200 tons, a decline of 0.01%. Overnight, the most-traded SHFE zinc contract opened at ¥24,930/mt, surged to ¥25,185/mt at the beginning of the session, then retreated to ¥24,850/mt, and finally closed at ¥24,880/mt, down ¥10/mt, or 0.04%. Trading volume decreased to 128,000 lots, and open interest increased by 1,571 lots to 120,000 lots. The weak consumption is putting pressure on zinc prices, making it difficult for SHFE zinc to gain upward momentum.

Tin

The closing price of the SHFE 2406 tin contract in the overnight session yesterday was 277,250 yuan/mt, up 130 yuan/mt or 0.05%. The highest price reached 280,860 yuan/mt, and the lowest was 275,580 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-500 yuan/mt over SHFE 2406 tin contract, versus discounts of 0-500 yuan/mt for delivery brands and premiums of 300-500 yuan/mt for Yunxi brand. During the morning session yesterday, SHFE tin prices fluctuated at high levels, and downstream companies showed a strong sentiment of wait-and-see. Overall, the spot market was relatively quiet yesterday.

Nickel

On May 28, Jinchuan nickel was at a premium of 700-1000 yuan/mt, with an average of 850 yuan/mt, a decrease of 250 yuan/mt compared with the previous trading day. Russian nickel was at a discount of 200 to 800 yuan/mt, with an average of 500 yuan/mt, a decrease of 100 yuan/mt compared with the previous trading day. In the morning, the market rose along with the overall non-ferrous metals sector. Spot prices saw adjustments, with traditional brands decreasing and new brands increasing, mainly due to the shortage of domestic spot electro-deposited nickel. However, overall spot market transactions were still dominated by rigid demand purchases. Nickel briquette prices were 152,500-153,300 yuan/mt, an increase of 2,750 yuan/mt compared with the previous trading day. The price gap between nickel briquette and nickel sulphate was about 2,900 yuan/mt (nickel sulphate prices were 2,900 yuan/mt lower than nickel briquette prices).

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
11 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
11 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
11 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
11 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
13 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
13 giờ trước