Aluminum prices to swing on a strong note due to macro tailwinds and slower inventory growth

Đã xuất bản: Mar 25, 2024 15:36
Nguồn: SMM
The macro front was positive. Fed maintained interest rates unchanged in March, which was in line with expectations.

The macro front was positive. Fed maintained interest rates unchanged in March, which was in line with expectations. However, it maintained its expectation of three interest rate cuts this year. State Council released favourable policies, the National Development and Reform Commission (NDRC) and State Council expressed their intention to support for the real economy and attract foreign investment. The market was still expecting interest rate cuts, shoring up aluminum prices.

Fundamentals: Domestic aluminum operating production capacity remained stable in the week. Yunnan aluminium smelters have begun to resume production. 800,000 kilowatts of power load was allocated to the aluminum industry for production resumption, which is equivalent to the annual production capacity of 520,000 mt. Although Yunnan and other regions are still in the dry season, Yunnan’s power transmission to other provinces decreased and local photovoltaic wind power generation increased. The production resumption of 520,000 mt will be completed before mid-April. It will take a certain period from the restart of the potlines to the stable output of aluminum liquid. It is expected that the production resumption will make limited contribution to daily output in March, and large-scale production release is unlikely to happen until late April. Cost: The domestic aluminum raw and auxiliary materials were stable in the week, and the coal prices continued to decline. The coal purchase price of large smelters in Shandong were frequently reduced, and power generation costs of captive power plants were somewhat affected. Power sources such as grid power were mainly stable, and the immediate cost of domestic aluminum remained stable at 16,825 yuan/mt. According to customs data, the total imports of primary aluminium from January to February were 472,000 mt, up 214.7% YoY; the total exports were 985 mt, down 73% YoY; the total net imports were 471,000 mt, up 221.9% YoY; Total imports from Russia was about 277,000 mt, accounting for 58.7% of the total, up 163.2% YoY. Total imports from India was approximately 64,000 mt, accounting for 13.7% of total, up 607.0% YoY. Demand: Domestic downstream consumption increased slightly in the week, mainly as the construction extrusion sector operating rate picked up. The production of PV modules was better in March thanks to strong orders. The operating rate of small companies such as aluminum plate/sheet, strip and foil also improved. Growth of domestic aluminum social inventories slowed down, and aluminum billets inventories kept falling.

From a technical perspective, the model predicts that the price range of SMM A00 aluminum average price will be [18,955, 19,345], the price center will be 19,160, the unit is yuan/mt, the extreme price range will be [18,810, 19,540], the normal price range will be [18,910, 19,410], and the conservative price range will be [19,000, 19,280]. The price is expected to pull back after an initial rise or go up. The support range will be [18,910, 19,000], and the resistance range will be [19,280, 19,410]. The model predicts that the price range of the most-traded SHFE aluminium contract will be [18,975, 19,515], with the price center of 19,240, and the unit is yuan/mt. The extreme price range will be [18,700, 19,770], the normal price range will be [18,880, 19,600], and the conservative price range will be [19,070, 19,430]. The price is expected to move sideways. The support range will be [18,880, 19,070], and the resistance range will be [19,430, 19,600].

On the macro front, the Fed announced an interest rate resolution in the early morning of March 21, keeping the federal funds rate target range unchanged at 5.25% to 5.5%, in line with market expectations. Fed has not released a hawkish signal, giving the market confidence in interest rate cuts and boosting metal products prices. In terms of fundamentals, Yunnan supply will continue to rise, which may make up for some of the reductions in Sichuan and Inner Mongolia. Domestic average daily output in March was mainly stable. Primary aluminum imports surged significantly YoY, which had a certain impact on domestic spot prices, and spot discounts sustained. On the macro front, negative market sentiment has been released after Fed's interest rate meeting, but there is no severe supply shortage, social inventory is expected to begin to drop, and downstream consumption is still expected to improve. Aluminum prices may swing on a strong note due to positive factors. SMM predicts that SHFE aluminum will fluctuate at 18,880-19,600 yuan/mt this week, and LME aluminum may fluctuate at $2,250-2,360/mt.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Vedanta Aluminium đẩy nhanh chuyển đổi số với AI và IoT cho sản xuất thông minh
1 giờ trước
Vedanta Aluminium đẩy nhanh chuyển đổi số với AI và IoT cho sản xuất thông minh
Đọc thêm
Vedanta Aluminium đẩy nhanh chuyển đổi số với AI và IoT cho sản xuất thông minh
Vedanta Aluminium đẩy nhanh chuyển đổi số với AI và IoT cho sản xuất thông minh
Gần đây, Vedanta Aluminium, nhà sản xuất nhôm lớn nhất Ấn Độ, đã đẩy nhanh quá trình chuyển đổi số tại các nhà máy, triển khai trí tuệ nhân tạo, IoT công nghiệp, phân tích nâng cao và hệ thống an toàn thông minh trên quy mô lớn để xây dựng hệ thống sản xuất thông minh kết nối thế hệ mới, nâng cao toàn diện an toàn tại hiện trường, hiệu quả sản xuất và khả năng phục hồi vận hành. Quá trình chuyển đổi số của công ty đã mang lại kết quả rõ rệt trên nhiều lĩnh vực kinh doanh, bao gồm sản xuất chế tạo, hậu cần vận tải, quản lý tài sản và an toàn tại hiện trường. Trong quản lý hậu cần, nhà máy luyện kim Korba, cơ sở sản xuất cốt lõi của Vedanta Aluminium, đã xây dựng tháp điều khiển AI tích hợp định vị GPS, theo dõi phương tiện qua IoT, viễn trắc video, rào địa lý và phân tích dữ liệu thời gian thực để giám sát thông minh đầu cuối đối với vận chuyển than, xuất kho thành phẩm, xử lý tro bay và các quy trình hậu cần khác, cải thiện đáng kể việc điều phối và giám sát hậu cần. Trong phát triển an toàn, cơ sở Lanjigarh đã tập trung nỗ lực số hóa vào đào tạo an toàn nhân sự và xây dựng năng lực ứng phó khẩn cấp.
1 giờ trước
Giảm tồn kho nhôm thỏi nhanh trong mùa cao điểm hỗ trợ giá nhôm giữ vững trong ngắn hạn [Tóm tắt cuộc họp buổi sáng về nhôm của SMM]
1 giờ trước
Giảm tồn kho nhôm thỏi nhanh trong mùa cao điểm hỗ trợ giá nhôm giữ vững trong ngắn hạn [Tóm tắt cuộc họp buổi sáng về nhôm của SMM]
Đọc thêm
Giảm tồn kho nhôm thỏi nhanh trong mùa cao điểm hỗ trợ giá nhôm giữ vững trong ngắn hạn [Tóm tắt cuộc họp buổi sáng về nhôm của SMM]
Giảm tồn kho nhôm thỏi nhanh trong mùa cao điểm hỗ trợ giá nhôm giữ vững trong ngắn hạn [Tóm tắt cuộc họp buổi sáng về nhôm của SMM]
[Giảm tồn kho nhôm nhanh trong mùa cao điểm hỗ trợ giá nhôm giữ vững trong ngắn hạn] Nhìn chung, giữa các yếu tố tăng và giảm đan xen, giá nhôm dự kiến sẽ tiếp tục dao động ở mức cao.
1 giờ trước
Các nhà máy alumin Hà Nam tăng giá mua xút ăn da thêm 50 nhân dân tệ/tấn trong tháng 9
1 giờ trước
Các nhà máy alumin Hà Nam tăng giá mua xút ăn da thêm 50 nhân dân tệ/tấn trong tháng 9
Đọc thêm
Các nhà máy alumin Hà Nam tăng giá mua xút ăn da thêm 50 nhân dân tệ/tấn trong tháng 9
Các nhà máy alumin Hà Nam tăng giá mua xút ăn da thêm 50 nhân dân tệ/tấn trong tháng 9
[Giá thu mua xút ăn da từ nhà máy alumina chính thống tại tỉnh Hà Nam] SMM được biết, giá thu mua đơn hàng định kỳ xút lỏng màng ion 32% của nhà máy alumina chính thống tại Hà Nam trong tháng 9 tăng 50 nhân dân tệ/tấn so với tháng 8. Giá giao tại nhà máy là 2.270 nhân dân tệ/tấn (giá được điều chỉnh trên cơ sở nồng độ 100%).
1 giờ trước
Aluminum prices to swing on a strong note due to macro tailwinds and slower inventory growth - Shanghai Metals Market (SMM)