SMM Morning Comment For SHFE Base Metals January 11

Đã xuất bản: Jan 11, 2024 09:57
Nguồn: SMM
LME copper prices opened at $8341/mt and closed at $8391/mt in overnight trading, a rise of 0.74%, with the low-end of $8320/mt and the high-end of $8399/mt.

SHANGHAI, January 11 (SMM) –
Copper
LME copper prices opened at $8341/mt and closed at $8391/mt in overnight trading, a rise of 0.74%, with the low-end of $8320/mt and the high-end of $8399/mt. Trading volume was 25,000 lots, and open interest stood at 280,000 lots. The most active SHFE 2402 copper contract prices opened at 68010 yuan/mt and closed at 67920 yuan/mt last evening, down 0.01%, with the high-end of 68110 yuan/mt and the low-end of 67670 yuan/mt. Trading volumes stood at 17,000 lots and open interest stood at 121,000 lots. On the macro front, Fed official Williams said that policy restrictions should be relaxed only when it is convinced that the inflation rate is continuing to move toward 2%, dampening market expectations of interest rate cuts and putting pressure on copper prices. We need to pay attention to the US CPI data released today, as expectations for interest rate cuts may become clearer. In terms of fundamentals, from the supply side, a large amount of imported copper flows into domestic trade market, consumption recovery is limited, and the overall supply is relatively ample. However, there is room for arbitrage between Shanghai and Guangdong, and supply may goods flow into Guangdong, which may change the supply pattern. In terms of consumption, copper prices also dropped to new lows as premiums fell. Downstream consumption has picked up to a certain extent. If copper prices and premiums remain stable, active consumption is expected to be sustainable. In terms of price, the Federal Reserve's reappearance of "hawkish" speech dampened expectations of interest rate cuts, and copper prices are expected to be under certain pressure.
Aluminum
Overnight, the most-traded SHFE 2403 aluminium contract opened at 19,050 yuan/mt, with high and low at 19,050 yuan/mt and 18,975 yuan/mt before closing at 19,005 yuan/mt, up 5 yuan/mt or 0.03%. LME aluminium opened at $2,243.5/mt on Wednesday, with high and low at $2,258.5/mt and $2,230.5/mt respectively before closing at $2,235/mt, a drop of $7/mt or 0.31%.
From a macro perspective, the U.S. dollar dropped 0.16% overnight, and the market awaited inflation data due to be released this week for clues on when the Federal Reserve may cut interest rates. In terms of fundamentals, as the disturbance in the alumina supply faded, the domestic aluminium production entered a period of stable operation, with no significant fluctuations in the short term; as for demand, aluminium downstream operating rates continued to be weak, and the amount of aluminium ingot produced was expected to increase MoM. However, domestic aluminium ingot inventories continued to remain low, supporting aluminium prices. Short-term aluminium prices will remain volatile, and we need to pay close attention to the pace of the Federal Reserve's interest rate cuts, domestic consumption and inventory changes.
Lead
Overnight, LME lead prices opened at US$2,056/ton, reaching a maximum of US$2,091.5/ton, and finally closed at US$2,083/ton, an increase of 1.21%.
SHFE 2402 lead contract prices opened at 16415 yuan/mt last evening and finally closed at 16385 yuan/mt, up 0.64%. Open interest decreased 2900 lots to 34547 lots. In addition, the open interest of SHFE 2403 contract rose rapidly to 48,900 lots.
Zinc
Overnight, LME zinc prices opened at US$2,510.5/ton. During the European trading session, prices rose to an intraday high of US$2,538/ton before falling to a bottom of US$2,485/ton. It finally closed down at US$2,506/ton, down US$4/ton, or 0.16%. Trading volume rose to 8983 lots, and open interest added by 3627 lots to 209,000 lots. LME zinc inventory dropped by 1575 mt or 0.73% to 215225 mt. The chairman of the Federal Reserve stated that the interest rate cut plan will be slowed down this year. The market's expectations for the Fed's interest rate cut were once again exploited.
SHFE 2402 zinc opened at 21145 yuan/mt overnight and fell to a low of 21025 yuan/mt. Overnight, the most-traded SHFE 2402 zinc contract opened at 21290 yuan/mt and touched a low of 21110 yuan/mt before closing at 21075 yuan/mt, down 55 yuan/mt or 0.26%. Trading volume decreased 29508 lots, and open interest decreased by 306 lots to 66412 lots. The import window reopened and supply tightness eased.
Tin
SHFE 2402 tin contract rose overnight and closed at 206190 yuan/mt, up 0.90%.
Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands did not change much. Small brand tin ingots were offered at discounts of 100-500 yuan/mt against SHFE 2402 tin contract, versus premiums of 100-600 yuan/mt for delivery brands, premiums of 900-1100 yuan/mt for Yunxi brand, and discounts of 900-1200 yuan/mt imported brand tin ingots. Tin prices remained relatively low in early trading yesterday. Trading companies reported a slight decline in the purchasing enthusiasm of downstream companies.
Nickel
Overnight, the most-traded SHFE nickel contract opened at 125110 yuan/mt, and closed at 124920 yuan/mt, down 830 yuan/mt. Trading volume fell by 37275 lots, and open interest decreased by 1847 lots. From a macro perspective, we still need to pay attention to the U.S. non-seasonally adjusted CPI annual rate for December and the U.S. interest rate meeting on February 1. This will be the first interest rate meeting in 2024. From a fundamental perspective, pure nickel warrants were destocked slightly yesterday, with decline mainly contributed by Kaohsiung. Nickel price is expected to inch lower.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
12 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
12 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
12 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
12 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
14 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
14 giờ trước
SMM Morning Comment For SHFE Base Metals January 11 - Shanghai Metals Market (SMM)