SMM Morning Comment For SHFE Base Metals December 4

Đã xuất bản: Dec 4, 2023 09:58
Nguồn: SMM
LME copper prices opened at $8552.5/mt and closed at $8625/mt in last Friday trading, a gain of 1.84%, with the low-end of $8511/mt and the high-end of $8640/mt.

SHANGHAI, December 4(SMM) –
Copper
LME copper prices opened at $8552.5/mt and closed at $8625/mt in last Friday trading, a gain of 1.84%, with the low-end of $8511/mt and the high-end of $8640/mt. Trading volume was 32,000 lots, and open interest stood at 266,000 lots. The most active SHFE 2401 copper contract prices opened at 68660 yuan/mt and closed at 68990 yuan/mt last evening, up 0.97%, with the high-end of 69150 yuan/mt and the low-end of 68660 yuan/mt. Trading volumes stood at 40,000 lots and open interest stood at 172,000 lots. On the macro front, last Friday, Powell's speech failed to dispel traders' bets on interest rate cuts next year, and U.S. bond yields plunged during the session. In addition, the U.S. ISM manufacturing PMI index recorded 46.7, which was lower than expected. It was below 50 for the 13th consecutive month, setting the longest record in more than 20 years. On Fundamentals, as of December 1, SMM copper inventories across major Chinese markets stood at 54,900 mt, down 3,700 mt from last Monday and 57,800 mt lower than the same period last year. Limited shipments arrivals of imported and domestic copper over East China and no decline in downstream purchasing lowered inventories. In South China, due to the increase in arrivals from surrounding areas and production halts at some downstream resulted in an increase in inventory. In terms of consumption, with high prices, demand is expected to remain suppressed. Due to the influence of low inventory and macro sentiment, copper prices will move strongly in the near future.
Aluminum
At last Friday’s night session, the most-traded SHFE 2401 aluminum contract opened at 18545 yuan/mt, with its low and high at 18545 yuan/mt and 18695 yuan/mt before closing at 18690 yuan/mt, up 135 yuan/mt or 0.73%. LME aluminum opened at $2198/mt last Friday, with its high and low at $2217/mt and $2183/mt respectively before closing at $2200/mt, an increase of $6/mt or 0.27%.
On the macro front, market expectations for the end of the Federal Reserve's current interest rate hike cycle have increased again. Earlier, Federal Reserve Chairman Powell's speech strengthened the market's confidence that the Federal Reserve has completed monetary policy tightening and may start cutting interest rates starting in March next year. Domestic macroeconomic data have weakened, and the manufacturing PMI index remained below 50%. There are growing expectations for the release of domestic favorable policies at the end of the year, but it will still take time to transmit to the manufacturing industry and other sectors. In terms of fundamentals, there are no further changes expected on the supply side in the short term, and market trading logic generally focuses on the resilience of consumer demand in the off-season. The short-term macro atmosphere is negative and the off-season will pressure aluminum prices. At the same time, inventory continues to be reduced, giving aluminum prices certain support.
Lead
LME lead open at $2131.5/mt and went downward during the Asian trading hours last Friday evening, declining to $2113/mt during the European trading hours. It finally dropped and closed at $2126.5/mt, down $0.5/mt or 0.02%.
The most-traded SHFE 2401 lead contract opened at 15810 yuan/mt and fell 150 yuan/mt or 0.95% to 15705 yuan/mt last Friday evening, briefly hitting the lowest point at 15700 yuan/mt and the highest point at 15850 yuan/mt.
zinc
Last Friday, LME zinc opened at US$2,478.5/ton and tested as low as US$2,455/ton. It touched a high of US$2,533/ton at the end of the day, and finally closed up at US$2,519.5/ton, an increase of US$47/ton, or 1.90%. The trading volume decreased by 760 lots to 10,800 lots, and open interest decreased by 1,667 lots to 202,000 lots. LME inventories decreased by 1,975 tons to 224,300 tons, a decrease of 0.87%.
Last Friday evening, the most-traded SHFE 2401 zinc contract opened at 20750 yuan/mt and rose to 20945 yuan/mt before closing at 20925 yuan/mt, up 205 yuan/mt or 0.99%. Trading volume decreased 51101 to 43,800 lots, and open interest decreased by 4308 lots to 87,900 lots. Caixin China's manufacturing industry in November exceeded expectations and recorded 50.7, returning to above 50. Macroeconomic sentiment has recovered.
Tin
SHFE 2401 tin contract rose to 201120 yuan/mt at last Friday’s night session and closed at 199660 yuan/mt, up 1.92%.
During the early trading last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands did not changes much. Small brand tin ingots were offered at premiums of 0-300 yuan/mt over SHFE 2312 tin contract, versus premiums of 500-800 yuan/mt for delivery brands, premiums of 1000-1100 yuan/mt for Yunxi brand, and discounts of 600 yuan/mt imported brand tin ingots. Due to the recent fluctuations in tin prices, downstream companies mostly took a wait-and-see attitude and the purchasing sentiment was not high.
Nickel
Nickel prices hit bottom and rebounded last week, with a peak daily increase of about 5.2%. By last Friday's close, SHFE nickel prices fell back to 129,380 yuan/mt. On the macro front, the US Labor Department announced on the evening of November 30 that the initial jobless claims for the week ending November 25 were 218,000, compared to the previous value of 209,000, and market expectations of 220,000. Another key data was the US initial jobless claims in the week ending November 18, which were 1.927 million, expected at 1.872 million, and the previous value was 1.84 million. It is worth noting that the initial jobless claims for the week ending November 25 include the Thanksgiving holiday, and there is typically significant volatility in the numbers around holidays. All these data reflect a cooling of the US labor market, leading to increased market expectations for a subsequent interest rate cut by the Federal Reserve. This had a positive impact on commodities in general, but pure nickel was not significantly affected by macro sentiment due to fundamental drag. From a fundamental perspective, according to SMM research, some small electrowinning nickel enterprises reduced output in November. It is anticipated that certain enterprises will resume normal production in December. This has no significant impact on the overall oversupply situation. Additionally, due to the continuous decline in nickel sulphate price and the rebound in SHFE nickel, the premium of nickel sulphate over nickel briquette narrowed to around 1,000 yuan/mt. The production of nickel sulphate from nickel briquette is once again unprofitable. Looking at the downstream demand, alloy orders remained relatively stable overall, with a slight reduction in civilian orders compared to the previous month, leading to a minor decline in pure nickel demand. In summary, the current macro situation continues to improve, but the fundamental pressure on SHFE nickel hinders upward momentum, and there is still downward potential.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
10 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
10 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
10 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
10 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
12 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
12 giờ trước