SMM Morning Comment For SHFE Base Metals September 19

Đã xuất bản: Sep 19, 2023 10:01
Nguồn: SMM
LME copper prices opened at $8400/mt and closed with a drop of 0.68% at $8352/mt last evening, with the low-end of $8342/mt and the high-end of $8411.5/mt.

SHANGHAI, Sep 19(SMM) –

Copper

LME copper prices opened at $8400/mt and closed with a drop of 0.68% at $8352/mt last evening, with the low-end of $8342/mt and the high-end of $8411.5/mt. Trading volume stood at 14,000 lots. Open interest stood at 264,000 lots. The most active SHFE 2310 copper contract prices opened at 69300 yuan/mt and finished at 68950 yuan/mt last evening, down 0.46%, with the low-end of 68950 yuan/mt and the high-end of 69350 yuan/mt. Trading volume was 27,000 lots, and open interest stood at 151,000 lots. On the macro front, on September 18, local time, according to data released by the U.S. Department of the Treasury, the total U.S. national debt exceeded $33 trillion for the first time on September 18. In addition, the market expected that the Federal Reserve had reached the "last mile" of raising interest rates. However, soaring energy prices in August unexpectedly pushed inflation to rebound more than expected, and market expectations were shaken. On Fundamentals, As of Monday September 18, SMM copper inventories across major Chinese markets stood at 110,800 mt, up 9,900 mt from last Friday and 26,100 mt higher from the same period last year. The increase in inventories in East China is mainly due to the continued arrival of imported copper. In South China, the arrivals of more domestic copper and weak consumer demand under the current high copper prices increased local inventories. In terms of consumption, there is some room for demand to pick up after the delivery.

Aluminum

Overnight, the most-traded SHFE 2310 aluminum contract opened at 19,285 yuan/mt, with its lowest and highest at 19,195 yuan/mt and 19,320 yuan/mt before closing at 19,315 yuan/mt, up 120 yuan/mt or 0.63% compared with the previous trading day. LME aluminum opened at $2,192.5/mt on Monday, with its high and low at $2,222.5/mt and $2,185/mt respectively before closing at $2,217/mt, an increase of $21/mt or 0.96%. On the macro front, the Federal Reserve, the Bank of England and the Bank of Japan will announce interest rate decisions this week, and the market expects the Fed meeting on September 20 to remain on hold again. On a fundamental level, the growth rate of domestic aluminum supply is decelerating, import window is open, and the market's overseas aluminum ingot supply is on the rise. In addition, due to no obvious improvement in downstream operating rate during the peak season, both aluminum ingots and aluminum billet faced inventory accumulation this week. Short-term low inventory and low warehouse receipts will support aluminum prices, though. SHFE aluminum contract is anticipated to oscillate at a high level.

Lead

Overnight, LME lead prices opened at $2,261/mt and closed at $2247.5/mt, a decrease of 0.77%. During the Asian session, LME lead reaching as high as $2,270/mt. During the European session, LME lead stocks increased significantly, with the total amount exceeding the 60,000 mt mark. Prices fell to $2,226.5/mt.

The most active SHFE 2310 lead contract prices opened at 17150 yuan/mt overnight and finally closed at 17220 yuan/mt, up 0.35%, with the open interest down 867 lots to 86714 lots.

Zinc

Overnight, LME zinc prices opened at $2514.5/mt and closed up $24/mt or 0.95% at $2539/mt. The trading volume was 8192 lots, and open interest increased 5924 lots to 223,000 lots. LME zinc inventories decreased by 3,975 tons from 122,000 tons to 118,600 tons. However, after overseas destocking, imported zinc continued to arrive, and the fundamental support for zinc prices was weak.

Last evening, the most active SHFE 2310 zinc contract prices opened at 21835 yuan/mt and closed at 21875 yuan/mt, up 95 yuan/mt or 0.44%. Trading volume stood at 37,000 lots, and open interest decreased by 2108 lots to 93,600 lots. In the spot market, spot goods were sufficient, and sellers sold aggressively, lowering spot premiums rapidly. Although the fundamental support for zinc prices has weakened, the downward channel for zinc prices may be narrow considering the recent downstream demand for replenishment before the holiday.

Tin

SHFE tin rose to 222470 yuan/mt overnight and closed up 0.6% at 221550 yuan/mt.

Spot premiums and discounts barely changed yesterday. Small brand tin ingots were offered at premiums of 200 yuan/mt, premiums of 300-600 yuan/mt for delivery brands, and premiums of 800-1,200 yuan/mt for Yunxi brand, and a discount of 500 yuan/mt for imported tin brands. Trades in spot market were muted.

Nickel

Overnight, the most-traded SHFE nickel contract opened at 162,100 yuan/mt, and closed at 162,900 yuan/mt, up 100 yuan/mt. Trading volume rose by 32,836 lots, and open interest decreased by 1,942 lots. On the macro front, market participants should pay attention to the Fed’s interest rate decision on September 21, CST. The current market expectation is 5.50%, which is unchanged from the previous value. In terms of fundamentals, affected by the downward trend of SHFE nickel prices, pure nickel spot transactions picked up yesterday. In summary, it is expected that nickel prices may rebound slightly in the future.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
12 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
12 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
12 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
12 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
14 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
14 giờ trước