[SMM survey] September stainless steel industry PMI comprehensive index month-on-month decline at the beginning of October by 3 series output or continue to weaken

Đã xuất bản: Oct 08, 2019 10:10 (GMT+8)

SMM, 8 Oct:

The final value of the PMI comprehensive index of the stainless steel industry in September was 48.13%, lower than the rise and fall line, down 1.47% from August, and 0.47% lower than the expected value. Due to Indonesia's implementation of an early mining ban at the end of August, nickel prices skyrocketed, stainless steel plants in September are in a difficult situation, stainless steel increases can not keep up with cost increases, most steel mills without RKEF face losses, and the cost is getting higher and higher how to ship goods is a big problem, it can be said that from the situation before National Day, the expected reduction in production is on the rise. The production index is 47.76%. Most of the stainless steel plants maintained normal production in September when there was still a stock of low-cost raw materials in the early stage, and the output did not decrease significantly. The decline was mainly due to the fine-tuning of some steel mills and the small reduction in some small steel mills. New order index 47.76%, compared with the overall high inventory and high scheduling of stainless steel factory, the order situation appears to be relatively inferior, there is no "gold nine silver 10" exuberant, but the downstream of stainless steel also has the ability to passively accept the price increase, demand has not been frustrated by the price increase of stainless steel for the time being. The purchasing volume index is 49.05%, and the raw material inventory index is 37.18%, all of which are lower than the rise and fall line. During the shock of the high nickel price, the steel mill and the nickel pig iron factory played a fierce game, but under the persistence of the nickel pig iron plant and the capital operation of the traders, the high price transaction was gradually implemented, and the cost level of the stainless steel plant rose in an all-round way. In September, the purchase price index was as high as 95.40%.

In October, the initial value of the PMI comprehensive index in the stainless steel industry was 46.23%, 1.9% lower than the final value in September, of which the production index was the most obvious, with a reduction of 11.94% to 35.83%. The high price of nickel pig iron was gradually implemented, and there were still signs of continuing to raise prices until National Day. It is expected that the probability of production reduction in non-integrated stainless steel plants will rise significantly next month under tremendous operating pressure. At the end of September, a stainless steel plant in East China announced plans to reduce production, which is expected to affect the output of 300 series of 20,000 tons, while the northern stainless steel plant also has a tendency to reduce the proportion of 3 series. The new order index is 49.05%, 1.29% higher than the final value in September, and the product inventory index 52.06% is 2.06% higher than the final value in September. The surveyed enterprises said that the order situation in October did not improve significantly, not only the social inventory is high, each steel mill also has some in-plant inventory, the later cost pressure and shipment pressure are more prominent. The purchasing volume index is 46.95%, and the raw material inventory index is 49.05% lower than the rise and fall line. The decrease of purchasing volume is mainly caused by the decrease of the proportion of 3 series and the reduction of production in some 300 series stainless steel plants. It is very important for steel mills to stabilize procurement and stable production, but in view of the high cost of products in the later stage, once the market falls, they will lose a lot of money, so they are purchased according to rigid demand, and the stock of raw materials in steel mills is on the low side. some steel mills focus on increasing the proportion of scrap stainless steel.

(for more information, please consult SMM, if you find it valuable, please move your finger to help forward it! )

"Application for downstream industry PMI composite index report trial

Welcome to contact Shanghai Colored Network big data-Nickel team:

Shanghai colored net big data-nickel Liu Yuqiao

Tel: + 86-21-5166 6804

Shanghai colored net big data-nickel Gao Yin

Tel: + 86-21-5166 6865

Shanghai colored net big data-nickel Duan Chunjing

Tel: + 86-21-5166 6896

Shanghai colored net big data-nickel Wang Tong

Tel: + 86-21-5166 6855

Shanghai colored net big data-nickel Wu Ruoyao

Tel: + 86-21-5159 5864

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM Analysis] Việc cắt giảm NPI liên quan đến nước của IMIP đối mặt với nhu cầu thép không gỉ yếu
5 giờ trước
[SMM Analysis] Việc cắt giảm NPI liên quan đến nước của IMIP đối mặt với nhu cầu thép không gỉ yếu
Đọc thêm
[SMM Analysis] Việc cắt giảm NPI liên quan đến nước của IMIP đối mặt với nhu cầu thép không gỉ yếu
[SMM Analysis] Việc cắt giảm NPI liên quan đến nước của IMIP đối mặt với nhu cầu thép không gỉ yếu
Các nhà máy NPI theo công nghệ RKEF của IMIP đã bắt đầu cắt giảm 30–40% công suất vận hành do thiếu nước. Việc cắt giảm kéo dài có thể làm giảm sản lượng NPI tích lũy hơn 100 nghìn tấn, tương đương hơn 11 nghìn tấn niken ở hàm lượng 11%. Trong khi đó, nhu cầu yếu dự kiến sẽ khiến sản lượng thép không gỉ dòng 300 của Trung Quốc trong tháng 10 giảm hơn 100 nghìn tấn. Lượng tồn kho NPI ở mức cao có thể giúp giảm bớt tác động ban đầu, trong khi hỗ trợ giá phụ thuộc vào thời gian gián đoạn và hoạt động mua vào từ hạ nguồn.
5 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (23/09)
5 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (23/09)
Đọc thêm
Dữ liệu: Diễn biến thị trường SHFE, DCE (23/09)
Dữ liệu: Diễn biến thị trường SHFE, DCE (23/09)
Bảng dưới đây cho thấy biến động giá kim loại đen và kim loại màu trên SHFE và DCE ngày 23 tháng 9 năm 2026
5 giờ trước
【SMM Tin nhanh Niken】Cập nhật thị trường niken Indonesia — ngày 23 tháng 9 năm 2026
6 giờ trước
【SMM Tin nhanh Niken】Cập nhật thị trường niken Indonesia — ngày 23 tháng 9 năm 2026
Đọc thêm
【SMM Tin nhanh Niken】Cập nhật thị trường niken Indonesia — ngày 23 tháng 9 năm 2026
【SMM Tin nhanh Niken】Cập nhật thị trường niken Indonesia — ngày 23 tháng 9 năm 2026
Thị trường quặng niken Indonesia duy trì ổn định vào ngày 23 tháng 9, với đánh giá của SMM đối với quặng niken Indonesia giao tại cảng đích không thay đổi ở các cấp chính: Ni 1,2%: 26,5 USD/tấn ướt, không đổi. Ni 1,3%: 28,5 USD/tấn ướt, không đổi. Ni 1,4%: 51,8 USD/tấn ướt, không đổi. Ni 1,5%: 58,5 USD/tấn ướt, không đổi. Ni 1,6%: 63,4 USD/tấn ướt, không đổi. Trên thị trường, các phê duyệt RKAB bổ sung cho năm 2026 đang dần gia nhập thị trường, giúp giảm bớt tình trạng thiếu hụt quặng niken trước đó. Tuy nhiên, tổng hạn ngạch bổ sung vẫn chưa được công bố chính thức và tốc độ thực hiện hạn ngạch vẫn là yếu tố then chốt đối với nguồn cung quặng và sản xuất của lò luyện trong thời gian tới. Trong khi đó, hạn hán do El Niño gây ra đã nổi lên như một mối lo ngại mới về phía nguồn cung. IMIP xác nhận tình trạng thiếu nước đã buộc một số lò luyện phải cắt giảm sản lượng NPI, mặc dù hoạt động vẫn chưa bị dừng lại.
6 giờ trước