[SMM analysis] the operating rate of aluminum profiles fell month-on-month in June, and a second consecutive decline is expected in July.

Đã xuất bản: Jul 12, 2019 19:33 (GMT+8)
Recently, SMM has communicated with dozens of domestic profile enterprises, through investigation, analysis and data calculation, it is found that the start-up rate in June is down from the previous month, and it is difficult to recover in July. The opening rate of the aluminum profile industry was 60.79% in June, down 1.33% from May and 1.65% from last year.

Recently, SMM has communicated with dozens of domestic profile enterprises, through investigation, analysis and data calculation, it is found that the start-up rate in June is down from the previous month, and it is difficult to recover in July. The opening rate of the aluminum profile industry was 60.79% in June, down 1.33% from May and 1.65% from last year.

In terms of different product types, as June approaches the off-season of traditional consumption, the operating rate of construction profile enterprises as a whole has declined slightly, but it has remained at a high level of more than 61%. The operating rate of industrial profile enterprises has fallen slightly month on month, and there has been no sharp drop in the previous forecast, or even an increase of about 8% over the same period last year. According to SMM analysis, due to the emergence of the "531" policy last year, the operating rate of photovoltaic profiles fell by a cliff, affecting the overall operating rate of industrial profiles, and although the performance of automobile profiles this year is relatively poor, its impact is still smaller than that of last year's photovoltaic profiles, and enterprises have reported that the orders and output of photovoltaic, rail cross-section profiles, and aluminum formwork products this year are still good, so the overall operating rate of industrial materials is slightly lower than that of the previous month. It was higher than last year. In addition, in terms of enterprise size, large enterprises began to feel the decline in orders in June. Because of their small scale and flexible adjustment of business strategy, medium-sized enterprises are more likely to maintain their own output at a stable level, while small enterprises are most obviously affected. because of the small ability to resist risks and the competitiveness of the industry, the operation is vulnerable to the decrease in the overall order of the industry. Coupled with the introduction of sports meetings in some areas, environmental inspection and other reasons, the output and orders of small enterprises have declined by different degrees.

Source: SMM

Taken together, we expect the overall operating rate of the aluminum profile industry to be around 59% in July, down nearly 2% from this month. July into the traditional seasonal off-season, according to some research enterprises reflect, this year's market is not as good as last year, SMM analysis that last year the real estate market is relatively active, building materials and some industrial materials orders good performance, the formation of "July / August off-season is not light" phenomenon, so last July the overall profile start-up rate is relatively high, and this year or will enter the normal off-season, difficult to show last year's good condition, the start-up rate will therefore be inferior to the same period last year. The author further speculates that if the results of the survey end in July are basically in line with expectations, SMM expects it to be difficult to show a significant improvement in August.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM Tin nhanh] South32 điều chỉnh chào giá premium CIF MJP quý IV/26 ở mức 265 USD/tấn
02 Oct 2026 10:52 (GMT+8)
[SMM Tin nhanh] South32 điều chỉnh chào giá premium CIF MJP quý IV/26 ở mức 265 USD/tấn
Đọc thêm
[SMM Tin nhanh] South32 điều chỉnh chào giá premium CIF MJP quý IV/26 ở mức 265 USD/tấn
[SMM Tin nhanh] South32 điều chỉnh chào giá premium CIF MJP quý IV/26 ở mức 265 USD/tấn
Nguồn tin thị trường cho biết: South32 điều chỉnh chào giá phí premium CIF MJP quý IV/2026 xuống còn 265 USD/tấn, giảm từ 325 USD/tấn. Hiệu lực đến ngày 5 tháng 10 năm 2026.
02 Oct 2026 10:52 (GMT+8)
Giá ADC 12 của Ấn Độ giữ vững khi nhôm LME giảm; nguồn cung phế liệu khan hiếm hạn chế đà giảm
01 Oct 2026 17:48 (GMT+8)
Giá ADC 12 của Ấn Độ giữ vững khi nhôm LME giảm; nguồn cung phế liệu khan hiếm hạn chế đà giảm
Đọc thêm
Giá ADC 12 của Ấn Độ giữ vững khi nhôm LME giảm; nguồn cung phế liệu khan hiếm hạn chế đà giảm
Giá ADC 12 của Ấn Độ giữ vững khi nhôm LME giảm; nguồn cung phế liệu khan hiếm hạn chế đà giảm
Giá ADC 12 tại Ấn Độ vẫn tương đối ổn định dù giá nhôm LME kỳ hạn 3 tháng giảm 1,2% trong giai đoạn từ ngày 24 đến 30 tháng 9.
01 Oct 2026 17:48 (GMT+8)
Rio Tinto đảm bảo hoạt động vận hành nhà máy luyện kim Bell Bay đến hết năm 2031
01 Oct 2026 17:09 (GMT+8)
Rio Tinto đảm bảo hoạt động vận hành nhà máy luyện kim Bell Bay đến hết năm 2031
Đọc thêm
Rio Tinto đảm bảo hoạt động vận hành nhà máy luyện kim Bell Bay đến hết năm 2031
Rio Tinto đảm bảo hoạt động vận hành nhà máy luyện kim Bell Bay đến hết năm 2031
Rio Tinto ngày 1/10 thông báo đã đạt được thỏa thuận với Chính quyền bang Tasmania, Chính phủ Liên bang Úc và Hydro Tasmania về việc gia hạn cung cấp điện cho nhà máy luyện nhôm Bell Bay đến hết năm 2031. Hai chính phủ cũng sẽ cung cấp gói hỗ trợ tổng cộng 200 triệu đô la Úc trong 5 năm, mỗi bên đóng góp 100 triệu đô la Úc. Các điều khoản thương mại của thỏa thuận điện không được tiết lộ. Bell Bay sản xuất khoảng 190.000 tấn nhôm nguyên sinh mỗi năm, trong khi hợp đồng điện hiện tại dự kiến hết hạn vào cuối năm 2026. Thỏa thuận này giúp nhà máy thoát khỏi tình trạng bất ổn trước mắt về hoạt động. Bell Bay là nhà máy luyện nhôm lớn thứ ba của Úc nhận được hỗ trợ từ chính phủ vào năm 2026, sau Boyne và Tomago, cho thấy áp lực dai dẳng từ chi phí điện cao và cạnh tranh quốc tế.
01 Oct 2026 17:09 (GMT+8)