Inventories And Stockpiles To Keep PGM Prices In Check In 2015 – CPM Group

Đã xuất bản: Jun 25, 2015 16:04
One research firm is not expecting to see a turnaround in platinum group metals (PGM) in 2015 as platinum prices remain near six-year lows and palladium hovers at a one-year low。

By Paul Ploumis 24 Jun 2015 Last updated at 07:38:02 GMT

(Kitco News) - One research firm is not expecting to see a turnaround in platinum group metals (PGM) in 2015 as platinum prices remain near six-year lows and palladium hovers at a one-year low.

Tuesday CPM Group, released its Platinum Group Metals Yearbook for 2015, noting some of the major highlights in the past year. Looking ahead, they note that significant stockpiles will continue to weigh on prices in 2015.

“It is clear that investors and other market participants have been selling metal from inventories in 2014 and the first half of 2015…” the firm said in a press release. “Any significant increase in prices may be limited to some degree by continued sales from these inventories.

“Even the longest and most severe labor strikes in South Africa’s platinum mining industry could not support platinum prices during 2014, as a combination of weak fabrication demand and sales from large above ground inventories built up in previous years sent prices lower,” the analysts said in the report.

CPM Group noted that the labor issues in South Africa caused significant withdraws from above-ground stockpiles; however, inventories still remain above levels prior to 2009.

While inventories helped to cap prices on the supply side of the market, CMP Group also noted that demand has been lackluster. The firm said that platinum fabrication declined to 7.02 million ounces in 2014, down 2.8% from 2013; the firm also noted that this was the second straight year of declining demand.

“Platinum fabrication demand during 2014 was the lowest since 2010. Demand was driven lower by weaker consumption of platinum jewelry and reduced demand from the auto sector,” the report said.

Platinum is a key component mostly in diesel engines and CMP said that last year Auto sector demand declined to 3.13 million ounces. The only auto markets to see an increase in platinum demand was in North American, Europe and Japan. “Platinum use in all other regions and countries declined 25%,” the report said.

The report highlighted falling demand in Russia, Brazil, and India, in particular.

Another drag on platinum, according to CPM Group, is weakening jewelry demand. The report noted that platinum jewelry demand dropped for the second straight year because of low interest in China and Japan, “which account for around 90% of platinum jewelry demand.”

Although palladium prices managed to see a positive return in 2014, CPM Group said the precious metal saw a drop in net investment demand.

“The decline reflected some investors selling palladium from their unreported inventories as they took profits derived from the strong prices during 2014 and reduced concerns regarding mine supply from both South Africa and Russia during the second half of the year,” the report said.

CMP Group is a little bit more positive on palladium as the metal has seen some renewed demand and declining supplies. The firm said that in 2014 supply declined 1.4% from the previous year, to 9 million ounces; however, demand rose for the fifth consecutive year to 9.02 million ounces, up 2.5% from 2013.

“Strong palladium demand growth from the auto and electronics sectors helped push prices higher during 2014. Fabrication demand for palladium is forecast to continue rising during 2015, albeit at a slower pace than that seen in recent years,” the firm said.

Courtesy: Kitco News

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Ventec đầu tư 47,3 triệu USD mở rộng nhà máy tại Côn Sơn để tăng sản lượng CCL
10 giờ trước
Ventec đầu tư 47,3 triệu USD mở rộng nhà máy tại Côn Sơn để tăng sản lượng CCL
Đọc thêm
Ventec đầu tư 47,3 triệu USD mở rộng nhà máy tại Côn Sơn để tăng sản lượng CCL
Ventec đầu tư 47,3 triệu USD mở rộng nhà máy tại Côn Sơn để tăng sản lượng CCL
Nhà sản xuất tấm phủ đồng (CCL) Đài Loan Ventec International Group (6672.TW) ngày 17/9 đã thông qua ngân sách mở rộng 1,5 tỷ Đài tệ (khoảng 47,3 triệu USD) để thuê và nâng cấp một nhà máy nhàn rỗi tại Côn Sơn, Giang Tô, triển khai hai dây chuyền tự động với công suất mục tiêu hàng tháng 500.000 tấm CCL và 2,4 triệu mét prepreg. Khu đất rộng 20.000 m2 nằm cạnh cơ sở hiện hữu của công ty và được hưởng lợi từ giấy phép môi trường sẵn có, cho phép sản xuất hàng loạt sớm hơn khoảng một năm so với dự án xây mới. Chi tiêu dự kiến khoảng 41,76 triệu NDT cho nâng cấp nhà xưởng và 246 triệu NDT cho máy móc thiết bị. Cơ cấu sản phẩm bao gồm vật liệu tốc độ cao M6 đang tăng sản lượng, cùng các cấp M7/M8/M9 đang được khách hàng quốc tế về máy chủ và mô-đun quang đánh giá chất lượng. Ventec ghi nhận doanh thu hợp nhất tháng 8 kỷ lục 810 triệu Đài tệ, tăng 133,2% so với cùng kỳ năm trước, với tám tháng đầu năm tăng 53,6%. Nhà máy Côn Sơn sẽ bổ trợ cho cơ sở tại Thái Lan của công ty và phục vụ máy chủ AI, bộ chuyển mạch tốc độ cao, mô-đun quang và điện tử ô tô, thúc đẩy nhu cầu đối với lá đồng thượng nguồn và lá đồng điện phân.
10 giờ trước
Thị trường phế liệu đồng chứng kiến sự điều chỉnh mạnh khi giá giảm, nguồn cung vẫn hạn chế
10 giờ trước
Thị trường phế liệu đồng chứng kiến sự điều chỉnh mạnh khi giá giảm, nguồn cung vẫn hạn chế
Đọc thêm
Thị trường phế liệu đồng chứng kiến sự điều chỉnh mạnh khi giá giảm, nguồn cung vẫn hạn chế
Thị trường phế liệu đồng chứng kiến sự điều chỉnh mạnh khi giá giảm, nguồn cung vẫn hạn chế
Tuần này (14/9 - 17/9), thị trường đồng phế liệu đã trải qua những điều chỉnh mạnh sau khi giá đồng giảm đáng kể từ mức cao trên 112.000 nhân dân tệ/tấn của tuần trước, chạm đáy ở mức 108.370 nhân dân tệ/tấn vào cuối tuần. Hợp đồng đồng được giao dịch nhiều nhất trên SHFE tiếp tục trượt từ 108.240 nhân dân tệ/tấn đầu tuần xuống mức thấp trong tuần là 107.320 nhân dân tệ/tấn.
10 giờ trước
[SMM Analysis] Dữ liệu chi tiết về sản lượng axit sunfuric của Trung Quốc tháng 8
12 giờ trước
[SMM Analysis] Dữ liệu chi tiết về sản lượng axit sunfuric của Trung Quốc tháng 8
Đọc thêm
[SMM Analysis] Dữ liệu chi tiết về sản lượng axit sunfuric của Trung Quốc tháng 8
[SMM Analysis] Dữ liệu chi tiết về sản lượng axit sunfuric của Trung Quốc tháng 8
Dữ liệu NBS cho thấy sản lượng axit sunfuric (quy đổi 100%) của Trung Quốc trong tháng 8 đạt 7,984 triệu tấn, giảm 308.000 tấn so với 7,676 triệu tấn trong tháng 7, giảm 15,5% so với cùng kỳ năm ngoái. Sản lượng axit sunfuric (quy đổi 100%) lũy kế năm 2026 đạt 68,141 triệu tấn, giảm 4,6% so với cùng kỳ năm ngoái.
12 giờ trước
Inventories And Stockpiles To Keep PGM Prices In Check In 2015 – CPM Group - Shanghai Metals Market (SMM)