SMM copper price review and forecast

เผยแพร่แล้ว: Jun 3, 2024 17:13
At the beginning of last week, new policies were introduced in China’s real estate sector, and favorable policies for the housing market pushed up SHFE base metals prices, with the most-traded SHFE copper contract touching a high of 85,880 yuan/mt. On Thursday, SHFE base metals prices declined.

At the beginning of last week, new policies were introduced in China’s real estate sector, and favorable policies for the housing market pushed up SHFE base metals prices, with the most-traded SHFE copper contract touching a high of 85,880 yuan/mt. On Thursday, SHFE base metals prices declined. The short squeeze in COMEX copper dissipated as LME copper inventories continued to increase, narrowing the price spread between the COMEX most-traded copper contract and the LME 3-month copper contract. Negative feedback from the demand side became prominent, with LME copper price falling all the way to around $10,000/mt, and the most-traded SHFE copper contract falling below 83,000 yuan/mt. The US Fed released the Beige Book on economic conditions, predicting moderate goods price increases. Fed officials remained cautious about future rate cuts, and US Treasury yields rebounded. However, due to the continued slowdown in inflation, the market still expects one rate cut within the year.

In the eurozone market, the April unemployment rate fell more than expected, boosting market confidence. The ECB is likely to cut rates this week, and the euro's rise against the dollar pushed the US dollar index higher, putting further pressure on copper prices. In the Chinese market, the State Council issued new policies to strictly control new smelting capacities for copper and alumina, but the market had already priced in this, providing limited support for copper prices.

On the fundamentals side, the downward trend in copper concentrate TCs temporarily slowed. Domestic smelters, which had been active in exports previously, gradually delivered cargoes to warehouses. Inventories in LME Asian warehouses accumulated over 8,000 mt during the week, and the SHFE/LME copper price ratio showed signs of recovery, with trade in the imported copper market picking up. Spot premiums in Shanghai first declined and then rose during the week. At the beginning of the week, with high copper prices, domestic inventories continued to accumulate by 19,000 mt. After the mid-week price decline, downstream orders significantly improved. Due to a bearish sentiment, sellers were holding back goods and raising prices, with spot discounts returning to below 200 yuan/mt.

This week, several countries will release the final PMI for May. Before the ECB rate cut decision and the release of US unemployment and non-farm payrolls data, the market is expected to remain cautious. However, the current resilience of inflation will keep the US dollar index running high. Under bearish sentiment, copper prices may fall, with LME copper expected to trade between $10,000-10,300/mt and SHFE copper between 80,500-83,500 yuan/mt. In the spot market, as copper prices fall, the contango of the SHFE front-month contract against the next-month contract will narrow. With increased downstream purchasing sentiment, sellers may raise their offers. Spot discounts against the SHFE 2406 contract are expected to be between 200-50 yuan/mt.

The SMM copper price forecasting model predicts the price range for the most-traded copper contract's closing price to be [83,925, 90,555], with an average of 86,660 yuan/mt. The unit is yuan/mt. The extreme price range is [81,920, 92,310], the normal price range is [83,260, 91,140], and the conservative price range is [84,590, 89,970]. Price is expected to be sideways or consolidate weakly. The support range is [83,260, 84,590], and the resistance range is [89,970, 91,140].

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
12 ชั่วโมงที่แล้ว
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
อ่านเพิ่มเติม
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
ACG Metals ประกาศเมื่อวันที่ 1 กันยายนว่าเหมือง Gediktepe ในตุรกีผลิตคอปเปอร์คอนเซนเทรตชุดแรกได้เมื่อวันที่ 31 สิงหาคม นับเป็นจุดเริ่มต้นของช่วงเพิ่มกำลังการผลิต บริษัทจะค่อย ๆ เพิ่มปริมาณการป้อนแร่และปรับปรุงประสิทธิภาพโรงงาน โดยตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2026 เป้าหมายการผลิตต่อปีในสภาวะคงที่ของ Gediktepe อยู่ที่ 20,000–25,000 ตันทองแดงเทียบเท่า ประกาศฉบับเต็มยังยืนยันว่าเหมืองผลิตซิงก์คอนเซนเทรตชุดแรกได้ในเดือนสิงหาคม 2026 แม้จะไม่เปิดเผยวันที่แน่ชัดและปริมาณ SMM ประเมินว่าการผลิตซิงก์ในคอนเซนเทรตของเหมืองอยู่ที่ประมาณ 10,000–15,000 ตันของปริมาณโลหะสังกะสีในปี 2026
12 ชั่วโมงที่แล้ว
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
12 ชั่วโมงที่แล้ว
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
อ่านเพิ่มเติม
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
12 ชั่วโมงที่แล้ว
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
14 ชั่วโมงที่แล้ว
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
อ่านเพิ่มเติม
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
เอพิร็อคได้รับคำสั่งซื้อมูลค่าประมาณ 610 ล้านโครนสวีเดน (64 ล้านดอลลาร์สหรัฐ) จากเอ็มเอ็มจี ลิมิเต็ด และผู้รับเหมาเหมืองแร่ ได้แก่ ไชน่า หัวเย่ และ 23เอ็มซีซี สำหรับอุปกรณ์เหมืองใต้ดินเพื่อสนับสนุนการขยายเหมืองทองแดงโคเอมาคาอูในบอตสวานา คำสั่งซื้อประกอบด้วยแท่นเจาะหน้าเหมือง แท่นเจาะหลุมผลิต แท่นเจาะติดตั้งสลักเคเบิล รถตัก และรถบรรทุกใต้ดิน พร้อมด้วยระบบควบคุมระยะไกล อะไหล่ การฝึกอบรม และการสนับสนุนทางเทคนิคหน้างาน อุปกรณ์ดังกล่าวจะสนับสนุนการขยายโครงการโคเอมาคาอูของเอ็มเอ็มจีที่กำลังดำเนินอยู่ ซึ่งออกแบบมาเพื่อเพิ่มกำลังการผลิตทองแดงในหัวแร่จากประมาณ 60,000 ตัน เป็น 130,000 ตันต่อปี โครงการรวมถึงการก่อสร้างโรงแต่งแร่ใหม่ขนาด 4.5 ล้านตันต่อปี ซึ่งจะเพิ่มกำลังการบดรวมเป็นมากกว่า 8 ล้านตันต่อปี ควบคู่ไปกับการพัฒนาโซน 5 เหนือ แมงโก และซีตา นอร์ท-อีสต์ คาดว่าจะได้หัวแร่ทองแดงชุดแรกจากการขยายในครึ่งแรกของปี 2571 เอพิร็อคระบุว่าการส่งมอบยานพาหนะใต้ดินชุดใหม่จะเริ่มในไตรมาส 4 ปี 2569 และคาดว่าจะแล้วเสร็จภายในไตรมาส 2 ปี 2571 ซึ่งสอดคล้องกับกำหนดการขยายโดยรวม ยานพาหนะที่สั่งซื้อประกอบด้วยแท่นเจาะหน้าเหมืองรุ่นบูมเมอร์ แท่นเจาะหลุมผลิตรุ่นซิมบา แท่นเจาะติดตั้งสลักเคเบิลรุ่นเคเบิลเทค รถตักรุ่นสกูปแทรม และรถบรรทุกใต้ดินรุ่นไมน์ทรัค โดยหลายคันติดตั้งระบบอัตโนมัติและการควบคุมระยะไกล คำสั่งซื้ออุปกรณ์นี้ถือเป็นอีกหนึ่งหมุดหมายการดำเนินงานของโครงการขยายโคเอมาคาอูที่ได้รับการอนุมัติแล้ว ไม่ใช่เป้าหมายการผลิตใหม่ ด้วยการจัดซื้อที่คืบหน้าและการส่งมอบอุปกรณ์ตามกำหนดจนถึงไตรมาส 2 ปี 2571 โครงการยังคงเดินหน้าสู่แผนของเอ็มเอ็มจีในการเพิ่มกำลังการผลิตทองแดงในหัวแร่เป็น 130,000 ตันต่อปี การขยายนี้แสดงถึงการเพิ่มกำลังการผลิตทองแดงของโคเอมาคาอูอย่างมีนัยสำคัญในแถบทองแดงคาลาฮารีของบอตสวานา
14 ชั่วโมงที่แล้ว