China's copper cathode output in February

เผยแพร่แล้ว: Mar 12, 2024 11:59
SMM data showed that China's copper cathode output in February was 950,300 mt, a month-on-month decrease of 19,500 mt or 2.01%, but a year-on-year increase of 4.68%. Output decreased 9,100 mt from the expected 959,400 mt. The cumulative output from January to February was 1.9201 million mt, an increase of 159,000 mt or 9.03% year-on-year.

SMM data showed that China's copper cathode output in February was 950,300 mt, a month-on-month decrease of 19,500 mt or 2.01%, but a year-on-year increase of 4.68%. Output decreased 9,100 mt from the expected 959,400 mt. The cumulative output from January to February was 1.9201 million mt, an increase of 159,000 mt or 9.03% year-on-year.

There are several reasons for the unexpected decline in output in February: 1. Affected by the continued decline in copper concentrate TCs (as of March 1, the SMM imported copper concentrate TC index (weekly) was reported at $16.41/mt, a decrease of $7.09/mt from a week earlier, a new low in recent years. If the smelters purchase spot copper concentrate for production, the current loss is 1,417 yuan/mt; if the smelters use copper concentrate under long-term contracts for production, the current profit is 918 yuan/mt). Some smelters have lowered the input amount, reducing output. 2. A smelter in south-west China began to relocate, causing its output to drop significantly; 3. Some smelters reduced their operating rates during the Chinese New Year holiday. We believe that the average operating rate of copper cathode industry fell 1.38 percentage points month on month to 83.80% in February.

In March, only one smelter has overhaul plan, and another has postponed its overhaul until April. According to our survey, as of the beginning of March, eight smelters had reduced their raw material inputs, but that had not affected their output for the time being. Despite this, the total output in March still increased slightly compared with February. The main reasons are as follows: 1. In March, various smelters increased their production after the Chinese New Year holiday, and the number of production days also increased; 2. The two smelters that were put into operation at the end of last year continued to yield output; 3. After a smelter completely stopped production, most of its blister copper and anode plates were sold, which to a certain extent alleviated the shortage of raw materials for other smelters.

Based on the production schedules of various companies, SMM estimates that domestic copper cathode output in March will be 970,200 mt, a month-on-month increase of 19,900 mt or 2.09%, and a year-on-year increase of 18,800 mt or 1.98%. The cumulative output from January to March is expected to be 2.89 million mt, a year-on-year increase of 6.55% or 177,800 mt. However, this data should be the highest value in the first half of the year. In the second quarter, smelters will enter a period of intensive maintenance. According to our current survey, 7 smelters will be overhauled in April, involving a smelting capacity of 1.21 million mt. There are 8 smelters that need to be overhauled, involving a rough refining capacity of 1.84 million mt. In June, there will be 8 smelters that need to be overhauled, involving a smelting capacity of 1.56 million mt.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
8 ชั่วโมงที่แล้ว
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
อ่านเพิ่มเติม
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
ACG Metals ประกาศเมื่อวันที่ 1 กันยายนว่าเหมือง Gediktepe ในตุรกีผลิตคอปเปอร์คอนเซนเทรตชุดแรกได้เมื่อวันที่ 31 สิงหาคม นับเป็นจุดเริ่มต้นของช่วงเพิ่มกำลังการผลิต บริษัทจะค่อย ๆ เพิ่มปริมาณการป้อนแร่และปรับปรุงประสิทธิภาพโรงงาน โดยตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2026 เป้าหมายการผลิตต่อปีในสภาวะคงที่ของ Gediktepe อยู่ที่ 20,000–25,000 ตันทองแดงเทียบเท่า ประกาศฉบับเต็มยังยืนยันว่าเหมืองผลิตซิงก์คอนเซนเทรตชุดแรกได้ในเดือนสิงหาคม 2026 แม้จะไม่เปิดเผยวันที่แน่ชัดและปริมาณ SMM ประเมินว่าการผลิตซิงก์ในคอนเซนเทรตของเหมืองอยู่ที่ประมาณ 10,000–15,000 ตันของปริมาณโลหะสังกะสีในปี 2026
8 ชั่วโมงที่แล้ว
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
9 ชั่วโมงที่แล้ว
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
อ่านเพิ่มเติม
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
[ บทวิเคราะห์ SMM ] คู่มือฉบับภาพรายงานครึ่งปี 2569 ของผู้ถลุงทองแดง 19 ราย
9 ชั่วโมงที่แล้ว
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
10 ชั่วโมงที่แล้ว
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
อ่านเพิ่มเติม
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
MMG สั่งซื้ออุปกรณ์มูลค่า 64 ล้านดอลลาร์สหรัฐ เพื่อสนับสนุนการขยายเหมืองโคเอมาคาอูในบอตสวานา
เอพิร็อคได้รับคำสั่งซื้อมูลค่าประมาณ 610 ล้านโครนสวีเดน (64 ล้านดอลลาร์สหรัฐ) จากเอ็มเอ็มจี ลิมิเต็ด และผู้รับเหมาเหมืองแร่ ได้แก่ ไชน่า หัวเย่ และ 23เอ็มซีซี สำหรับอุปกรณ์เหมืองใต้ดินเพื่อสนับสนุนการขยายเหมืองทองแดงโคเอมาคาอูในบอตสวานา คำสั่งซื้อประกอบด้วยแท่นเจาะหน้าเหมือง แท่นเจาะหลุมผลิต แท่นเจาะติดตั้งสลักเคเบิล รถตัก และรถบรรทุกใต้ดิน พร้อมด้วยระบบควบคุมระยะไกล อะไหล่ การฝึกอบรม และการสนับสนุนทางเทคนิคหน้างาน อุปกรณ์ดังกล่าวจะสนับสนุนการขยายโครงการโคเอมาคาอูของเอ็มเอ็มจีที่กำลังดำเนินอยู่ ซึ่งออกแบบมาเพื่อเพิ่มกำลังการผลิตทองแดงในหัวแร่จากประมาณ 60,000 ตัน เป็น 130,000 ตันต่อปี โครงการรวมถึงการก่อสร้างโรงแต่งแร่ใหม่ขนาด 4.5 ล้านตันต่อปี ซึ่งจะเพิ่มกำลังการบดรวมเป็นมากกว่า 8 ล้านตันต่อปี ควบคู่ไปกับการพัฒนาโซน 5 เหนือ แมงโก และซีตา นอร์ท-อีสต์ คาดว่าจะได้หัวแร่ทองแดงชุดแรกจากการขยายในครึ่งแรกของปี 2571 เอพิร็อคระบุว่าการส่งมอบยานพาหนะใต้ดินชุดใหม่จะเริ่มในไตรมาส 4 ปี 2569 และคาดว่าจะแล้วเสร็จภายในไตรมาส 2 ปี 2571 ซึ่งสอดคล้องกับกำหนดการขยายโดยรวม ยานพาหนะที่สั่งซื้อประกอบด้วยแท่นเจาะหน้าเหมืองรุ่นบูมเมอร์ แท่นเจาะหลุมผลิตรุ่นซิมบา แท่นเจาะติดตั้งสลักเคเบิลรุ่นเคเบิลเทค รถตักรุ่นสกูปแทรม และรถบรรทุกใต้ดินรุ่นไมน์ทรัค โดยหลายคันติดตั้งระบบอัตโนมัติและการควบคุมระยะไกล คำสั่งซื้ออุปกรณ์นี้ถือเป็นอีกหนึ่งหมุดหมายการดำเนินงานของโครงการขยายโคเอมาคาอูที่ได้รับการอนุมัติแล้ว ไม่ใช่เป้าหมายการผลิตใหม่ ด้วยการจัดซื้อที่คืบหน้าและการส่งมอบอุปกรณ์ตามกำหนดจนถึงไตรมาส 2 ปี 2571 โครงการยังคงเดินหน้าสู่แผนของเอ็มเอ็มจีในการเพิ่มกำลังการผลิตทองแดงในหัวแร่เป็น 130,000 ตันต่อปี การขยายนี้แสดงถึงการเพิ่มกำลังการผลิตทองแดงของโคเอมาคาอูอย่างมีนัยสำคัญในแถบทองแดงคาลาฮารีของบอตสวานา
10 ชั่วโมงที่แล้ว
China's copper cathode output in February - Shanghai Metals Market (SMM)