SMM Morning Comments (Nov 21): Base Metals Closed Mostly with Gains

เผยแพร่แล้ว: Nov 21, 2022 10:00 (GMT+8)
LME and SHFE base metals closed mostly with gains last Friday. On the macro front, the US dollar rose following US bond yields, mainly because the hawkish remarks of US Fed weakened the market’s expectations for a suspension of rate hikes.

SHANGHAI, Nov 21 (SMM) – LME and SHFE base metals closed mostly with gains last Friday. On the macro front, the US dollar rose following US bond yields, mainly because the hawkish remarks of US Fed weakened the market’s expectations for a suspension of rate hikes.

LME copper fell 1.01%, aluminium rose 0.84%, lead added 0.82%, and zinc gained 0.48%.

SHFE copper fell 1.03%, aluminium rose 0.05%, lead added 0.35%, and zinc gained 0.86%.

Copper: LME copper opened at $8,062.5/mt last Friday and once dropped to the lowest of $8,023/mt. At last, the contract closed at $8,036/mt, down 1.01%. The trading volume was 18,000 lots, and open interest stood at 246,000 lots.

SHFE copper 2212 copper opened at 65,510 yuan/mt and trended lower to 65,150 yuan/mt. At last, the contract rose slightly and closed at 65,180 yuan/mt, down 1.03%. The trading volume was 39,000 lots, and open interest stood at 142,000 lots.

On the macro front, the US dollar rose following US bond yields, mainly because the hawkish remarks of US Fed weakened the market’s expectations for a suspension of rate hikes, which was bearish for copper prices. In terms of crude oil, due to concerns about the decline in demand in China and the continuous rise of the US dollar, Brent Crude fell 2.4%, and US oil dipped 1.9%, which was also bearish for copper prices.

On the fundamentals, LME did not restrict the delivery of Russian metals. LME copper inventory rose to 90,000 mt, and the proportion of registered warrants increased while that of cancelled warrants fell. The backwardation structure of the LME cash to 3M spread was shifted to the contango structure, and the risk of a short squeeze was lifted. SMM survey showed that as of last Friday, the social inventory across major Chinese markets totalled 128,000 mt, up 10,900 mt from last Monday. The support for copper prices from the fundamentals weakened. On the demand side, the decline in copper prices boosted downstream purchases on rigid demand, but the terminal consumption did not improve. New orders from the State Grid and real estate declined, and those from the NEVs industry also dropped due to the approaching cancellation of the NEVs subsidy. Copper prices will remain rangebound in the near future amid the easing macro factors and the weaker fundamentals.

Aluminium: The most-traded SHFE 2212 aluminium contract opened at 19,160 yuan/mt at last Friday’s night session and rose to 19,245 yuan/mt before closing at 19,080 yuan/mt, up 10 yuan/mt or 0.05%.

LME aluminium opened at $2,395/mt last Friday and closed at $2,415/mt, an increase of $20/mt or 0.84%.

Recently, the domestic pandemic situation has worsened, and the transportation efficiency declined. Stimulated by domestic favourable policies, aluminium prices jumped above 19,000 yuan/mt. However, higher prices and poor orders discouraged downstream purchases with arrival of the traditional off-season. SHFE aluminium is expected to remain firm in the short term, with market attention being focused on demand and impact of the pandemic.

Lead: LME lead opened at $2,140/mt and grew 0.82% to $2,158.5/mt last Friday, after hitting the lowest point at $2,134.5/mt and the highest point at $2,189/mt. The open interest increased 554 lots to 101,000 lots from the previous trading day.

The most-traded SHFE 2212 lead contract opened at 15,795 yuan/mt and closed at 15,720 yuan/mt, up 0.35%, after briefly hitting the highest point at 15,850 yuan/mt. The open interest decreased 1,084 lots to 43,712 lots from the previous trading day.

Zinc: LME zinc closed at $3,022.5/mt last Friday, up $14.5/mt or 0.48%. The open interest rose 2,338 lots to 203,000 lots. Overnight LME inventory lost 50 mt to 42,700 mt. Constantly falling LME inventory offered support to LME zinc.

The most traded SHFE 2212 zinc contract closed at 24,515 yuan/mt last Friday night, up 210 yuan/mt or 0.86%. The open interest added 1,097 lots to some 85,000 lots. Zinc smelting in Sichuan and Qinghai was cut to varying degrees due to pandemic and environmental-protection related restrictions, and tightening supply attracted the engagement of longs. On the whole, SHFE zinc is likely to be supported by relatively low inventory, but the consumption side and open import window will weigh on the prices to some extent.

Last Friday, the MLF steadily preceded, and Chinese one-year LPR rate in November is likely to remain unchanged, while the bet on the fall in five-year rate is roughly 20%. The U.S. October home sales fell 5.9% from a year earlier, falling for the ninth month in a row; home prices rose for a record 128 months in a row. US Federal Reserve Bank of Atlanta President Bostic said on Saturday that he was prepared to "forgo" a 75 basis point rate rise at the Fed's December meeting and believes the Fed's target policy rate needs to be raised by no more than one percentage point to deal with the inflation. Three ECB policymakers hinted at a slower pace of rate hikes, but an earlier start to tapering.

Tin: SHFE tin rebounded after opening lower at last Friday’s night session, and moved mostly at above 180,000 yuan/mt. Longs and shorts exited the market amid intensified wait-and-see sentiment. Last week, the domestic tin ingot social inventory continued to accumulate sharply. Trades in the spot market were weak. LME tin inventory fell slightly last week, mainly contributed by Asia. Overseas premiums fell back slightly. The import profit window was closed, but quotations of imported tin remained stable. With little disturbance to the supply and demand side and stronger caution, SHFE tin is expected to hover sideways at lows.

Nickel: On the macro front, on the evening of November 17, the US Department of Labour released that the number of initial claims for unemployment benefits in the US stood at 222,000, which was lower than the forecast of 225,000 and was lower than the previous value. This shows that the current US economy is still good and the interest rate hikes may not slow down, which is unfavourable for the prices of commodities. On the supply side, the SHFE/LME price ratio has not yet recovered. The imported spot pure nickel continued to suffer losses. Although SHFE nickel prices fell sharply, the spot prices of domestic pure nickel were still high, and shipments were not smooth. In terms of NPI, with the emergence of transactions that could be taken as guide prices and the weakening of the downstream market, the quotations offered by NPI plants dropped slightly. However, due to the possibility of losses, NPI plants were still less willing to lower their prices. NPI prices are likely to fall in the short term. On the demand side, according to SMM research, the spot prices of stainless steel in Wuxi and Foshan dropped slightly. As most processing plants were affected by the pandemic, downstream customers refrained from picking up the goods for the time being. Meanwhile, the output of steel mills increased significantly in October. Therefore, the inventory of traders increased. In terms of alloy sector, the orders for civil use were relatively small. In summary, the supply and demand of pure nickel continued to be weak, which can hardly provide support for the high nickel prices.

[Disclaimer: The above representation and data is based on market information SMM believes to be reliable at the time of acquiring as well as the comprehensive assessment by SMM research team, and any and all information provided in this article is for reference only. This article does not constitute a direct recommendation for investment or any decisions in any form and clients shall act on their own discreet and any decisions made by clients are not within the responsibility of SMM.]

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
Selkirk Copper ตั้งเป้ารีสตาร์ทเหมือง Minto ในช่วงครึ่งหลังของปี 2028 หลังผลการประเมินเศรษฐกิจเบื้องต้นเป็นบวก
3 นาทีที่แล้ว
Selkirk Copper ตั้งเป้ารีสตาร์ทเหมือง Minto ในช่วงครึ่งหลังของปี 2028 หลังผลการประเมินเศรษฐกิจเบื้องต้นเป็นบวก
อ่านเพิ่มเติม
Selkirk Copper ตั้งเป้ารีสตาร์ทเหมือง Minto ในช่วงครึ่งหลังของปี 2028 หลังผลการประเมินเศรษฐกิจเบื้องต้นเป็นบวก
Selkirk Copper ตั้งเป้ารีสตาร์ทเหมือง Minto ในช่วงครึ่งหลังของปี 2028 หลังผลการประเมินเศรษฐกิจเบื้องต้นเป็นบวก
เหมืองทองแดงเซลเคิร์กได้วางแนวทางการกลับมาดำเนินงานของเหมืองมินโตซึ่งเคยผลิตทองแดง-ทองคำ-เงินในยูคอน ประเทศแคนาดา หลังจากการประเมินเศรษฐกิจเบื้องต้นเสร็จสิ้น ซึ่งสนับสนุนการผลิตหัวแร่ชุดแรกในช่วงครึ่งหลังของปี 2571 การประเมินดังกล่าวระบุอายุเหมือง 13 ปี โดยใช้การทำเหมืองแบบเปิดและใต้ดินร่วมกัน ออกแบบให้มีอัตราการขุดและบดเฉลี่ย 4,100 ตันต่อวัน ที่กำลังการผลิตสูงสุด โครงการคาดว่าจะผลิตทองแดงเทียบเท่าในหัวแร่ประมาณ 27,200 ตันต่อปี หรือเทียบเท่าหัวแร่ทองแดง-ทองคำ-เงินเกรดสูงประมาณ 48,700 ตันต่อปี เงินลงทุนเริ่มต้นที่ต้องใช้เพื่อกลับมาผลิตอยู่ที่ประมาณ 186 ล้านดอลลาร์แคนาดา โดยใช้ราคาวางแผนของการศึกษาที่ทองแดง 5.00 ดอลลาร์สหรัฐต่อปอนด์ ทองคำ 3,600 ดอลลาร์สหรัฐต่อออนซ์ และเงิน 50 ดอลลาร์สหรัฐต่อออนซ์ การประเมินประมาณมูลค่าปัจจุบันสุทธิหลังหักภาษีที่อัตราคิดลด 7% ไว้ที่ 494 ล้านดอลลาร์แคนาดา อัตราผลตอบแทนภายในหลังหักภาษี 47.8% และระยะเวลาคืนทุนประมาณ 1.9 ปีนับจากการผลิตครั้งแรก มินโตได้ประโยชน์จากโครงสร้างพื้นฐานเดิมจำนวนมากจากการดำเนินงานก่อนหน้า รวมถึงโรงแต่งแร่ 4,100 ตันต่อวัน ตลอดจนโครงสร้างพื้นฐานของเหมืองเปิดและใต้ดินที่มีอยู่ เซลเคิร์กคอปเปอร์ระบุว่าการประเมินโครงสร้างพื้นฐานและอุปกรณ์เดิมของพื้นที่พบว่าส่วนใหญ่ยังอยู่ในสภาพใช้งานได้ดี และต้องการเพียงการดูแลและปรับปรุงเล็กน้อยเท่านั้น บริษัทตั้งเป้าการผลิตหัวแร่ชุดแรกในครึ่งหลังของปี 2571 ตามด้วยการเพิ่มกำลังการผลิตเต็มรูปแบบของการขุด การบด และการผลิตหัวแร่ภายในครึ่งแรกของปี 2572 การศึกษาความเป็นไปได้มีกำหนดเริ่มในไตรมาสที่ 4 ปี 2569 ขณะที่คำขอใบอนุญาตแก้ไขคาดว่าจะยื่นในช่วงไตรมาสที่สี่เช่นกัน เซลเคิร์กคอปเปอร์ระบุว่าการตัดสินใจกลับมาดำเนินงานตั้งเป้าไว้หลังการศึกษาความเป็นไปได้เสร็จสิ้นและได้รับใบอนุญาตแก้ไขในครึ่งหลังของปี 2570 การประเมินของมินโตชี้ให้เห็นแนวทางที่เป็นไปได้สำหรับเหมืองทองแดงที่เคยผลิตมาก่อนที่จะกลับเข้าสู่ตลาดภายในปี 2571 โดยมีโครงสร้างพื้นฐานด้านการแปรรูปและการทำเหมืองเดิมช่วยลดความต้องการเงินทุนและการก่อสร้างเมื่อเทียบกับโครงการใหม่ อย่างไรก็ตาม ตัวเลขการผลิตสูงสุด 27,200 ตันต่อปีเป็นทองแดงเทียบเท่าในหัวแร่ ไม่ใช่ทองแดงบริสุทธิ์เพียงอย่างเดียว การกลับมาดำเนินงานยังขึ้นอยู่กับการศึกษาความเป็นไปได้เพิ่มเติม ใบอนุญาต และการดำเนินโครงการ ทำให้ความคืบหน้าสู่การตัดสินใจกลับมาดำเนินงานในครึ่งหลังของปี 2570 เป็นจุดสำคัญที่ต้องจับตามอง
3 นาทีที่แล้ว
เหมืองทองแดงชูดีตั้งเป้าเริ่มทำเหมืองอีกครั้งในนามิเบียช่วงต้นปี 2027
6 นาทีที่แล้ว
เหมืองทองแดงชูดีตั้งเป้าเริ่มทำเหมืองอีกครั้งในนามิเบียช่วงต้นปี 2027
อ่านเพิ่มเติม
เหมืองทองแดงชูดีตั้งเป้าเริ่มทำเหมืองอีกครั้งในนามิเบียช่วงต้นปี 2027
เหมืองทองแดงชูดีตั้งเป้าเริ่มทำเหมืองอีกครั้งในนามิเบียช่วงต้นปี 2027
บริษัท คอนโซลิเดเต็ด คอปเปอร์ คอร์ป (CCC) ตั้งเป้าหมายกลับมาเดินเครื่องเหมืองเปิดที่เหมืองทองแดง Tschudi ทางตอนเหนือของนามิเบียอีกครั้งในช่วงต้นปี 2570 โดยต้องใช้เงินลงทุนเพื่อการพัฒนาประมาณ 30–40 ล้านดอลลาร์สหรัฐ เพื่อนำการทำเหมืองกลับมาดำเนินการอีกครั้ง ภายใต้แผนการรีสตาร์ตด้วยกระบวนการชะละลายแบบกอง (heap-leach) คาดว่า Tschudi จะมีกำลังการผลิตแคโทดทองแดงในอัตราต่อเนื่องมากกว่า 14,000 ตันต่อปี ตลอดอายุเหมืองเบื้องต้น 10 ปี CCC คาดว่าจะจัดทำการศึกษาความเป็นไปได้ขั้นสุดท้ายสำหรับการรีสตาร์ตการทำเหมืองแบบชะละลายกองแล้วเสร็จในเดือนกันยายน 2569 โดยตั้งเป้าเริ่มการทำเหมืองเปิดอีกครั้งในช่วงต้นปี 2570 แผนการรีสตาร์ตดังกล่าวเกี่ยวข้องเฉพาะการทำเหมืองเปิดที่ Tschudi เท่านั้น กระบวนการผลิตทองแดงได้กลับมาดำเนินการแล้วในปี 2567 โดยใช้กองแร่สำรองที่มีอยู่เดิม โดย CCC รายงานปริมาณการผลิตแคโทดทองแดงที่ได้มาตรฐาน LME Grade A มากกว่า 7,600 ตัน ณ เดือนมิถุนายน 2569 ก่อนหน้านี้ Tschudi เคยผลิตแคโทดทองแดงได้ประมาณ 75,000 ตัน ระหว่างปี 2558 ถึง 2563 ก่อนถูกปิดรักษาสภาพเหมือง ปัจจุบันเหมืองมีโครงสร้างพื้นฐานด้านการแปรรูปที่สำคัญอยู่แล้ว รวมถึงโรงงานสกัดด้วยตัวทำละลายและชุบโลหะด้วยไฟฟ้า (SX/EW) กำลังการผลิต 2.88 ล้านตันต่อปี ตามข้อมูลของ CCC เงินลงทุนเพื่อการรีสตาร์ต 30–40 ล้านดอลลาร์สหรัฐจะใช้เป็นหลักสำหรับการสูบน้ำออกจากเหมือง การระดมและถอนกำลังอุปกรณ์ทำเหมือง โรงบดแร่เคลื่อนที่ และการพัฒนาลานชะละลาย CCC ยังอยู่ระหว่างศึกษาการขยายกำลังการผลิตขนาดใหญ่ขึ้นโดยมุ่งเป้าไปที่แหล่งแร่ซัลไฟด์ของ Tschudi แนวคิดดังกล่าวรวมถึงการก่อสร้างโรงแต่งแร่แบบลอยตัว (flotation) กำลังการผลิต 3 ล้านตันต่อปี ควบคู่ไปกับการดำเนินงาน SX/EW ที่มีอยู่เดิม ซึ่งอาจเพิ่มกำลังการผลิตเฉลี่ยต่อปีเป็นประมาณ 30,000 ตันทองแดงเทียบเท่า ตลอดระยะเวลามากกว่า 10 ปี การขยายกำลังการผลิตดังกล่าวยังอยู่ระหว่างการศึกษาและแยกออกจากแผนการรีสตาร์ตการทำเหมืองแบบชะละลายกอง การรีสตาร์ตการทำเหมืองเปิดที่ Tschudi ตามแผนอาจช่วยเสริมความมั่นคงด้านอุปทานทองแดงของนามิเบีย โดยสนับสนุนกำลังการผลิตแคโทดในอัตราต่อเนื่องมากกว่า 14,000 ตันต่อปี หากโครงการดำเนินไปตามกำหนดการ โครงสร้างพื้นฐาน SX/EW ที่มีอยู่เดิมและความต้องการเงินลงทุนเพื่อการรีสตาร์ตที่ค่อนข้างต่ำเพียง 30–40 ล้านดอลลาร์สหรัฐ อาจช่วยให้กลับมาทำเหมืองได้เร็วกว่าเมื่อเทียบกับการพัฒนาโครงการใหม่ทั้งหมด อย่างไรก็ตาม การรีสตาร์ตในช่วงต้นปี 2570 ยังคงเป็นเป้าหมายของบริษัท โดยการจัดทำการศึกษาความเป็นไปได้ขั้นสุดท้ายให้แล้วเสร็จและการระดมกำลังเข้าพื้นที่เหมืองในลำดับถัดไป ถือเป็นหมุดหมายสำคัญที่ต้องจับตามอง
6 นาทีที่แล้ว
KCM เปิดเดินเครื่องโรงถลุง Nchanga อีกครั้ง หลังการฟื้นฟูมูลค่า 40 ล้านดอลลาร์สหรัฐ
9 นาทีที่แล้ว
KCM เปิดเดินเครื่องโรงถลุง Nchanga อีกครั้ง หลังการฟื้นฟูมูลค่า 40 ล้านดอลลาร์สหรัฐ
อ่านเพิ่มเติม
KCM เปิดเดินเครื่องโรงถลุง Nchanga อีกครั้ง หลังการฟื้นฟูมูลค่า 40 ล้านดอลลาร์สหรัฐ
KCM เปิดเดินเครื่องโรงถลุง Nchanga อีกครั้ง หลังการฟื้นฟูมูลค่า 40 ล้านดอลลาร์สหรัฐ
คอนคอปเปอร์ไมนส์ (KCM) ได้กลับมาเดินเครื่องโรงถลุง Nchanga ในแซมเบียอีกครั้ง หลังเสร็จสิ้นโครงการฟื้นฟูมูลค่า 40 ล้านดอลลาร์สหรัฐ นับเป็นการปรับปรุงครั้งใหญ่ครั้งแรกในรอบกว่า 8 ปี โรงถลุงซึ่งมีกำลังการผลิตปีละ 311,000 ตัน ถูกปิดซ่อมเป็นเวลา 106 วัน เพื่อให้งานฟื้นฟูครอบคลุมดำเนินการได้ โดยเดิมมีแผนปิด 60 วัน แต่ขยายเวลาออกไปหลังการตรวจสอบพบงานสำคัญเพิ่มเติมที่ต้องทำให้แล้วเสร็จ รองประธานเจ้าหน้าที่บริหารของ KCM นาย Satish Kumar กล่าวว่า การฟื้นฟูครั้งนี้เป็นส่วนหนึ่งของความพยายามสร้างบริษัทขึ้นใหม่ และรักษาอนาคตระยะยาวของการดำเนินงาน หลัง Vedanta Resources กลับเข้ามาบริหาร KCM ตามข้อมูลของผู้อำนวยการโรงถลุงและโรงกลั่น KCM นาย Yoram Kapai มีบุคลากรจาก KCM และพันธมิตรทางธุรกิจกว่า 1,500 คน เข้าร่วมโครงการฟื้นฟู บริษัทระบุว่างานแล้วเสร็จโดยไม่มีผู้บาดเจ็บร้ายแรง การกลับมาเดินเครื่องครั้งนี้ทำให้โรงงานแปรรูปสำคัญในห่วงโซ่การผลิตทองแดงครบวงจรของ KCM ในแซมเบียกลับมาดำเนินงานอีกครั้ง ความสนใจจะมุ่งไปที่ประสิทธิภาพการเดินเครื่องของโรงถลุงหลังช่วงบำรุงรักษาที่ยาวนาน และความพยายามในวงกว้างของ KCM ในการฟื้นฟูกำลังการผลิตทั่วทั้งสินทรัพย์เหมืองและการแปรรูป การกลับมาเดินเครื่องโรงถลุง Nchanga ช่วยขจัดข้อจำกัดด้านการแปรรูปชั่วคราวของ KCM หลังการปิดซ่อม 106 วัน ด้วยกำลังการผลิตปีละ 311,000 ตัน โรงงานแห่งนี้เป็นส่วนสำคัญของห่วงโซ่การแปรรูปทองแดงของ KCM การฟื้นฟูมูลค่า 40 ล้านดอลลาร์สหรัฐอาจช่วยเพิ่มความน่าเชื่อถือในการเดินเครื่อง หลังหลายปีที่แทบไม่มีการปรับปรุงใหญ่ ขณะที่จังหวะการเพิ่มปริมาณแร่จากเหมืองและการใช้กำลังการผลิตของสินทรัพย์แปรรูปของ KCM จะยังคงเป็นปัจจัยสำคัญต่อผลกระทบที่มีต่อการผลิตทองแดงโดยรวมของแซมเบีย
9 นาทีที่แล้ว