North American crude steel output dips in November

เผยแพร่แล้ว: Dec 22, 2015 17:26
According to the recent data published by the World Steel Association, the crude steel production by North American countries plunged lower by 13.7% during the month of November year-on-year.

By Paul Ploumis (ScrapMonster Author)

December 22, 2015 02:13:35 AM

ALBANY (Scrap Monster): According to the recent data published by the World Steel Association, the crude steel production by North American countries plunged lower by 13.7% during the month of November year-on-year. The production totaled 8.394 Mt in November this year as against 9.729 Mt recorded in Nov ’14.

The total crude steel production by Canada during November this year was 910,000 t, down significantly by 5.2% when compared with the November 2014 production. The US produced 6.089 Million tonnes of crude steel, considerably lower by 15.6% when compared to 7.216 Million tonnes production achieved during November 2014. The total crude steel production by Mexico edged lower by 9.5% from 1.447 Mt in November ‘14 to 1.310 Mt in November this year.

The Cuban crude steel production increased sharply by 17.9% year-on-year to 25,000 tonnes. The crude steel output by El Salvador was estimated at 10,000 tonnes in November this year, down 18.7% when compared with November last year. Guatemala produced 40,000 tonnes in November, more or less flat when compared with the production during the same month a year before. The crude steel output by Trinidad & Tobago nosedived by over 69% in November this year to 10,000 tonnes from 32,000 tonnes during same month the previous year.

The following table provides cumulative crude steel output for the first eleven months in 2015 in comparison with those during same period in 2014.

Country

11 months (2015)

11 months (2014)

% Change

Canada

11,351

11,626

-2.4

Cuba

250

232

+7.5

El Salvador

108

109

-0.6

Guatemala

358

353

+1.6

Mexico

16,789

17,477

-3.9

Trinidad & Tobago

276

451

-38.6

United States

73,138

80,964

-9.7

Note: Output in thousands of tonnes


คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
[SMM Stainless Steel Flash] India's Stainless Steel Scrap Imports Fall 6% YoY in H1 2026 Amid Elevated Landed Costs
5 นาทีที่แล้ว
[SMM Stainless Steel Flash] India's Stainless Steel Scrap Imports Fall 6% YoY in H1 2026 Amid Elevated Landed Costs
อ่านเพิ่มเติม
[SMM Stainless Steel Flash] India's Stainless Steel Scrap Imports Fall 6% YoY in H1 2026 Amid Elevated Landed Costs
[SMM Stainless Steel Flash] India's Stainless Steel Scrap Imports Fall 6% YoY in H1 2026 Amid Elevated Landed Costs
India's stainless steel scrap imports declined 6% YoY to 0.67 million tonnes in H1 2026 from 0.71 million tonnes a year earlier, driven by elevated landed costs and a sustained domestic scrap price advantage. Imported 304-grade scrap averaged US$1,410–1,450/t — approximately US$100–130/t above year-ago levels, with a net landed cost of approximately INR 148,000–149,000/t versus domestic 304 scrap at around INR 144,000/t, consistently favouring domestic procurement. By grade, 304 imports held steady at 0.26 mnt (+1% YoY), 430 rose to 0.068 mnt (+14%), and 316 declined to 0.06 mnt (-3%). By origin, the US remained the top supplier at 0.094 mnt (+4% YoY), followed by South Korea at 0.051 mnt (-6%) and Turkey at 0.023 mnt (-16%). Ferro nickel imports collapsed 62% YoY to 0.02 mnt, prompting mills to substitute nickel-bearing stainless scrap as an alternative nickel unit source and reinforcing domestic scrap preference. Looking ahead, JSL's capacity expansion will drive structural import demand through FY27–29, but near-term import recovery hinges on international price corrections and INR movement.
5 นาทีที่แล้ว
[เอสเอ็มเอ็ม สแตนเลส สตีล แฟลช] อินเดียได้โควตาเหล็ก 1.64 ล้านตันภายใต้ข้อตกลงการค้าเสรีกับสหภาพยุโรป หลีกเลี่ยงภาษี 50%
9 นาทีที่แล้ว
[เอสเอ็มเอ็ม สแตนเลส สตีล แฟลช] อินเดียได้โควตาเหล็ก 1.64 ล้านตันภายใต้ข้อตกลงการค้าเสรีกับสหภาพยุโรป หลีกเลี่ยงภาษี 50%
อ่านเพิ่มเติม
[เอสเอ็มเอ็ม สแตนเลส สตีล แฟลช] อินเดียได้โควตาเหล็ก 1.64 ล้านตันภายใต้ข้อตกลงการค้าเสรีกับสหภาพยุโรป หลีกเลี่ยงภาษี 50%
[เอสเอ็มเอ็ม สแตนเลส สตีล แฟลช] อินเดียได้โควตาเหล็ก 1.64 ล้านตันภายใต้ข้อตกลงการค้าเสรีกับสหภาพยุโรป หลีกเลี่ยงภาษี 50%
อินเดียได้เจรจาโควตาอัตราภาษีเฉพาะประเทศ (TRQs) ประมาณ 1.64 ล้านตันสำหรับผลิตภัณฑ์เหล็กภายใต้ข้อตกลงการค้าเสรีกับสหภาพยุโรป ซึ่งช่วยให้ผู้ส่งออกอินเดียเข้าถึงตลาดได้อย่างคาดการณ์ได้ ขณะที่อียูกำลังเข้มงวดระบบนำเข้าเหล็ก การจัดสรรทั้งหมดประกอบด้วย 946,616 ตันภายใต้ส่วน MFN และ 694,853 ตันภายใต้ส่วน FTA ครอบคลุมผลิตภัณฑ์หลากหลายประเภท เช่น เหล็กแผ่นรีดร้อนและรีดเย็น เหล็กเคลือบโลหะและเคลือบอินทรีย์ ผลิตภัณฑ์เหล็กวิลาด แผ่นเหล็กหนา ผลิตภัณฑ์สแตนเลส เหล็กเส้น เหล็กลวด และท่อชนิดต่าง ๆ โควตาที่เจรจาได้นี้มีความสำคัญ เนื่องจากระเบียบเหล็กฉบับใหม่ของอียูซึ่งมีผลบังคับใช้ตั้งแต่วันที่ 1 กรกฎาคม 2026 กำหนดภาษี 50% สำหรับการนำเข้าเหล็กทั้งหมดที่เกินโควตา รวมถึงจากประเทศคู่ค้า FTA ด้วย ข้อตกลงนี้มีกลไกปกป้องอินเดียไม่ให้เสียเปรียบ หากอียูขยายการเข้าถึงโควตาที่ดีกว่าให้แก่คู่ค้า FTA รายอื่น โดยโควตาจะได้รับการทบทวนหนึ่งปีหลังมีผลบังคับใช้ และทุกห้าปีหลังจากนั้น
9 นาทีที่แล้ว
[SMM สแตนเลสแบบเร่งด่วน] โควตานำเข้าเหล็กของสหภาพยุโรปใกล้หมดในช่วงปลายไตรมาส 3 การใช้โควตาสแตนเลสรีดเย็นแตะ 99%
18 นาทีที่แล้ว
[SMM สแตนเลสแบบเร่งด่วน] โควตานำเข้าเหล็กของสหภาพยุโรปใกล้หมดในช่วงปลายไตรมาส 3 การใช้โควตาสแตนเลสรีดเย็นแตะ 99%
อ่านเพิ่มเติม
[SMM สแตนเลสแบบเร่งด่วน] โควตานำเข้าเหล็กของสหภาพยุโรปใกล้หมดในช่วงปลายไตรมาส 3 การใช้โควตาสแตนเลสรีดเย็นแตะ 99%
[SMM สแตนเลสแบบเร่งด่วน] โควตานำเข้าเหล็กของสหภาพยุโรปใกล้หมดในช่วงปลายไตรมาส 3 การใช้โควตาสแตนเลสรีดเย็นแตะ 99%
ตามข้อมูลของคณะกรรมาธิการยุโรป โควตานำเข้าเหล็กของสหภาพยุโรปหลายรายการถูกใช้หมดแล้วหรือใกล้เต็มขีดจำกัด ขณะที่ช่วงโควตา 1 กรกฎาคม–30 กันยายนใกล้สิ้นสุดลง ในกลุ่มสเตนเลส หมวด 9 (แผ่นรีดเย็นและแถบรีดเย็น) โควตาของไต้หวันที่ 13,246 ตัน มีอัตราการใช้อยู่ที่ 90.96% ส่วนโควตา "ประเทศอื่น ๆ" ที่ 8,442 ตัน ใช้ไปถึง 99.48% ซึ่งเป็นอัตราการใช้สูงสุดในบรรดาหมวดสเตนเลส โควตาอื่น ๆ อีกหลายรายการถูกใช้หมดเต็มจำนวนแล้ว ได้แก่ แผ่นเหล็กเคลือบสารอินทรีย์ของอินเดีย (54,334 ตัน) เหล็กแผ่นรีดร้อนของออสเตรเลีย (11,830 ตัน) เหล็กเส้นการค้าและเหล็กรูปพรรณเบาของจีน (39,484 ตัน) วัสดุรางรถไฟและลวดเหล็กไม่เจือของตุรกี และเหล็กโครงสร้างกลวงและท่อไร้รอยต่ออื่น ๆ ของยูเครน โควตาในหมวด "ประเทศอื่น ๆ" และ "FTA" หลายรายการก็ถูกใช้หมดเช่นกัน การนำเข้าที่เกินโควตาที่ใช้หมดแล้วจะต้องเสียภาษีนอกโควตา 50% และคาดว่าจะมีการแข่งขันแบบมาก่อนได้ก่อนอย่างดุเดือดเมื่อโควตาไตรมาส 4 เปิดในวันที่ 1 ตุลาคม
18 นาทีที่แล้ว
North American crude steel output dips in November - Shanghai Metals Market (SMM)