[SMM Steel] Цены на плоский прокат в Юго-Восточной Азии разошлись: вьетнамские заводы повышают октябрьские предложения, а китайские цены снижаются

Опубликовано: Sep 4, 2026 13:28
[Вьетнам] Рынок плоского стального проката в Юго-Восточной Азии демонстрирует признаки расхождения: цены на рулонный прокат во Вьетнаме растут вслед за повышением предложений местных металлургических заводов, что подтолкнуло базовую импортную цену на горячекатаный рулон на 2 долл. США за тонну до 527 долл. США за тонну CFR Вьетнам. Крупный вьетнамский производитель стали 3 сентября объявил новые ежемесячные предложения, повысив цены на горячекатаный рулон SS400 и SAE1006 на 10 долл. США за тонну для поставок в октябре, установив их на уровне 540–543 долл. США за тонну CFR в зависимости от порта доставки, со скидкой около 10 долл. США за тонну для оптовых покупателей. Одновременно импорт горячекатаного рулона из Индонезии котировался на уровне 530 долл. США за тонну CFR, а индийский материал фиксировался на уровне 530–535 долл. США за тонну CFR. Однако импортные цены оставались непривлекательными для местных покупателей из-за узкого ценового разрыва с местными вьетнамскими заводами, и сделок зафиксировано не было, поскольку участники рынка только что вернулись после праздников. Это резко контрастировало со слабостью в Китае, где как внутренние, так и экспортные цены на горячекатаный рулон снизились на фоне вялых рыночных настроений и низкой торговой активности.

Заявление об источниках данных: За исключением общедоступной информации, все остальные данные обрабатываются SMM на основе общедоступной информации, рыночного общения и с опорой на внутреннюю базу данных и модели SMM. Они приведены только для справки и не являются рекомендациями для принятия решений.

По любым вопросам или для получения дополнительной информации, пожалуйста, свяжитесь: lemonzhao@smm.cn
Для получения дополнительной информации о доступе к нашим исследовательским отчётам обращайтесь:service.en@smm.cn
Связанные новости
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
1 минуту назад
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
Читать далее
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
U. S. Steel announced on September 3 that Blast Furnace No. 14 at Gary Works in Indiana had returned to service following the completion of a $350 million reline. The project included the replacement of the furnace’s refractory lining and maintenance of critical supporting systems, including furnace gas, cooling water, hoisting and stove systems. Blast Furnace No. 14 is the largest blast furnace at Gary Works and across U. S. Steel’s operating footprint, with annual hot-metal production capability exceeding two million “tons.”
1 минуту назад
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
1 минуту назад
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
Читать далее
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
Australia’s National Environmental Protection Agency has approved an extension of the Saraji open-cut mine in Queensland, operated by BHP Mitsubishi Alliance, allowing a further 55 million tonnes of steelmaking coal to be extracted between now and 2055. It is the agency’s first approval of a coal project since it began operations on July 1, 2026. The approval includes conditions intended to protect threatened-species habitats and water resources. The Climate Council estimated that using the coal overseas for steelmaking could generate about 120 million tonnes of carbon dioxide over the mine’s remaining life, although this is the organisation’s estimate.
1 минуту назад
【South Korea’s KOSPO Launches Five-Year Tender for Nearly 2.99 Mt of Thermal Coal, Excluding Russian Origin】
1 минуту назад
【South Korea’s KOSPO Launches Five-Year Tender for Nearly 2.99 Mt of Thermal Coal, Excluding Russian Origin】
Читать далее
【South Korea’s KOSPO Launches Five-Year Tender for Nearly 2.99 Mt of Thermal Coal, Excluding Russian Origin】
【South Korea’s KOSPO Launches Five-Year Tender for Nearly 2.99 Mt of Thermal Coal, Excluding Russian Origin】
Korea Southern Power Co., Ltd. (KOSPO) issued the ELT10 and ELT11 long-term thermal coal tenders on September 3, 2026. The tenders are open only to KOSPO’s existing suppliers and will close at 14:00 Korea Standard Time on September 9. The two tenders cover five contract years and seek a combined nominal volume of approximately 2.99 million tonnes. ELT10 seeks thermal coal with a minimum net calorific value of 4,300 kcal/kg NAR, shipped in 80,000-tonne Panamax cargoes. Its nominal five-year volume is approximately 1.04 million tonnes. The coal may be loaded in Indonesia or Australia, with 80,000 tonnes required in the first contract year and 240,000 tonnes annually in each of the following four contract years. ELT11 seeks thermal coal with a minimum net calorific value of 5,700 kcal/kg NAR, shipped in 150,000-tonne Capesize cargoes. Its nominal five-year volume is approximately 1.95 million tonnes. The tender calls for 150,000 tonnes in the first contract year and 450,000 tonnes annually in each of the following four years. Eligible origins include Indonesia, Australia, the United States, Canada and South Africa. Russian-origin coal, as well as coal or entities subject to United States sanctions, is excluded from both tenders. South Korean utilities increased their reliance on coal in 2026 amid weaker nuclear generation and elevated LNG prices. Coal-fired generation rose 26.6% year on year in the first quarter, while an August heatwave also lifted electricity demand and coal-fleet utilization.
1 минуту назад
[Вьетнам] Рынок плоского стального проката в Юго-Восточной Азии демонс - Shanghai Metals Market (SMM)