High efficiency of port discharges and rigid demand boosted by high pig iron production pushed up the amount of shipments from ports to a record high in 2023

Опубликовано: Aug 21, 2023 10:44
Источник: SMM
SHANGHAI, Aug 21 (SMM) –

SHANGHAI, Aug 21 (SMM) –

As of August 18, iron ore inventories across 35 ports tracked by SMM totaled 117.34 million mt, up 990,000 mt WoW, but 16.97 million mt YoY. The daily average imported iron ore shipments from the 35 ports added 102,000 mt on a weekly basis to 3.174 million mt this week. High pig iron output of BF-based steel mills brought with it rigid demand for raw materials. In addition, with upcoming delivery for the 2309 contract, spread between futures and spot prices gradually narrowed, thereby leading to some speculative demand from traders. Under such circumstance, iron ore shipments from the ports hiked to the highest level in a year. However, a build-up in inventory at ports was felt from the impact of more imported ore supply and higher efficiency of port discharge owing to the typhoon subsiding.

In the follow-up, given ample imported ore supply and waning impact of crude steel output limit, rigid demand from steel mills will be monitored. On the whole, it is expected that iron ore shipments from 35 ports may stand high. On the whole, iron ore inventories across 35 ports may slump.

Заявление об источниках данных: За исключением общедоступной информации, все остальные данные обрабатываются SMM на основе общедоступной информации, рыночного общения и с опорой на внутреннюю базу данных и модели SMM. Они приведены только для справки и не являются рекомендациями для принятия решений.

По любым вопросам или для получения дополнительной информации, пожалуйста, свяжитесь: lemonzhao@smm.cn
Для получения дополнительной информации о доступе к нашим исследовательским отчётам обращайтесь:service.en@smm.cn
Связанные новости
【JFE Steel Starts Japan’s First Large Stamp-Charging Coke Oven.】
1 минуту назад
【JFE Steel Starts Japan’s First Large Stamp-Charging Coke Oven.】
Читать далее
【JFE Steel Starts Japan’s First Large Stamp-Charging Coke Oven.】
【JFE Steel Starts Japan’s First Large Stamp-Charging Coke Oven.】
JFE Steel commenced operations at its newly constructed No. 6 Coke Oven at the Fukuyama area of its West Japan Works on August 31, 2026. The project was built between May 2023 and August 2026 with an investment of approximately JPY 45 billion and has an annual coke production capacity of around 420,000 tonnes. The facility is Japan’s first large-scale coke oven to adopt the stamp-charging method. Unlike conventional top charging, the process compacts coal powder before pushing it horizontally into the oven. According to the supplied article, the new design improves production efficiency and reduces operating costs through better coke quality.
1 минуту назад
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
1 минуту назад
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
Читать далее
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
【U. S. Steel Restarts Largest Blast Furnace After $350 Million Reline】
U. S. Steel announced on September 3 that Blast Furnace No. 14 at Gary Works in Indiana had returned to service following the completion of a $350 million reline. The project included the replacement of the furnace’s refractory lining and maintenance of critical supporting systems, including furnace gas, cooling water, hoisting and stove systems. Blast Furnace No. 14 is the largest blast furnace at Gary Works and across U. S. Steel’s operating footprint, with annual hot-metal production capability exceeding two million “tons.”
1 минуту назад
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
1 минуту назад
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
Читать далее
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
【Australia Approves Saraji Mine Extension to 2055, Allowing a Further 55 Mt of Steelmaking Coal Extraction】
Australia’s National Environmental Protection Agency has approved an extension of the Saraji open-cut mine in Queensland, operated by BHP Mitsubishi Alliance, allowing a further 55 million tonnes of steelmaking coal to be extracted between now and 2055. It is the agency’s first approval of a coal project since it began operations on July 1, 2026. The approval includes conditions intended to protect threatened-species habitats and water resources. The Climate Council estimated that using the coal overseas for steelmaking could generate about 120 million tonnes of carbon dioxide over the mine’s remaining life, although this is the organisation’s estimate.
1 минуту назад