May auto market: domestic demand under pressure, exports impressive; price difference between A00 aluminum and aluminum scrap narrows, raw materials in tight supply [SMM Cast Aluminum Alloy Morning Comment]

Published: Jun 11, 2026 09:12
[SMM Cast Aluminum Alloy Morning Comment: May Auto Market Domestic Demand Under Pressure, Exports Strong; Narrowing Price Difference Between A00 Aluminum and Scrap Tightens Raw Material Supply] The ADC12 market traded steadily on Wednesday, with the SMM ADC12 price remaining flat at 23,900 yuan/mt. This week, cast aluminum alloy futures diverged from SHFE aluminum, with cast aluminum futures steady to firm while SHFE aluminum fell below the 24,000 yuan/mt mark. In the spot market, A00 aluminum prices declined for consecutive sessions, but ADC12 prices remained firm. The spread between the two has returned to positive territory, ending the inversion since April, underscoring the resilience of alloy prices.

6.11 SMM Cast Aluminum Alloy Morning Comment

Futures: Overnight, the aluminum alloy 2608 contract opened higher, then retreated after rapid rise, reaching a high of 23,465 yuan/mt and a low of 23,005 yuan/mt, closing at the settlement price of 23,251 yuan/mt. The minutely chart showed that after the night session opened, prices quickly surged to around 23,465, then fluctuated downward, with a slight rebound near the close. The RSI indicator was already in overbought territory. Trading volume declined from the previous period, while open interest edged up by 121 lots. Overall, after the rapid rise met resistance and pulled back, stabilizing near the close, the contract fluctuated upward. In the near term, attention should be paid to the effectiveness of support at 23,200 yuan/mt.

Spot-Futures Price Spread Daily: According to SMM data, on June 10, the SMM ADC12 spot price had a theoretical premium of 880 over the closing price at 10:15 of the most-traded cast aluminum alloy contract (AD2607).

Warrant Daily: SHFE data showed that on June 10, total registered warrants for cast aluminum alloy stood at 39,224 mt, up 358 mt from the previous trading day. Among them, Shanghai registered 2,897 mt, up 0 mt; Guangdong registered 8,648 mt, down 153 mt; Jiangsu registered 8,041 mt, up 481 mt; Zhejiang registered 12,754 mt, up 88 mt; Chongqing registered 5,889 mt, down 58 mt; Sichuan registered 995 mt, up 0 mt.

Industry Dynamics: According to CAAM data, in May, automobile production and sales reached 2.616 million units and 2.629 million units, up 1.6% and 4.1% MoM respectively, but down 1.2% and 2.1% YoY respectively. From January to May, automobile production and sales reached 12.235 million and 12.207 million units, down 4.6% and 4.2% YoY respectively. According to CAAM analysis, in May, automobile production and sales increased MoM but edged down slightly YoY. Affected by multiple factors such as policy adjustments, changes in market structure, and the macro environment under pressure, the domestic market continued to post a double-digit decline YoY; exports remained robust, maintaining rapid growth.

Aluminum Scrap: Yesterday, SMM A00 price continued to fall 120 yuan/mt from the previous trading day to 23,900 yuan/mt, and the aluminum scrap market edged down slightly in tandem. On the price spread front, on June 10, the price difference between A00 aluminum and mixed aluminum extrusion scrap free of paint in Foshan was 2,458 yuan/mt, and the price difference between A00 aluminum and shredded aluminum tense scrap had fallen below 2,000 yuan/mt to 1,920 yuan/mt. Aluminum scrap market prices are expected to continue to hold up well at high levels amid fluctuations. As the off-season deepens, the sustainability of orders for downstream scrap utilization enterprises is a concern. These enterprises are maintaining a strategy of purchasing as needed and low inventory. Procurement sentiment is unlikely to improve significantly, and billing risks in the industry remain high. Meanwhile, expectations of supply-side contraction are strengthening. Overall, the market is characterized by weakness on both supply and demand sides.

Silicon Metal: On June 10, SMM east China non-oxygen blown #553 remained flat from the previous day at 9,150 yuan/mt; oxygen-blown #553 also held steady from the previous day at 9,150; 521# was flat from the previous day; 441# was flat from the previous day; 421# was flat from the previous day; 421# for silicone was flat from the previous day; 3303# was flat from the previous day. In Tianjin, some silicon prices edged up slightly. Silicon prices in Huangpu Port, Kunming, northwest China, Sichuan, Shanghai, and Xinjiang remained stable.

Markets Outside China: Currently, quotes for imported ADC12 have pulled back slightly to $3,350–$3,430/mt, and immediate import losses per ton have narrowed to within 3,000 yuan, but the theoretical import window remained closed.

Summary: On Wednesday, the ADC12 market traded steadily. SMM ADC12 price remained unchanged at 23,900 yuan/mt. This week, cast aluminum alloy futures diverged from SHFE aluminum, with cast aluminum futures holding steady and strengthening, while SHFE aluminum fell below the 24,000 yuan/mt level. In the spot market, A00 aluminum prices declined for several days, while ADC12 prices remained firm. The price spread between the two has returned to positive territory, ending the inversion since April and highlighting the resilience of alloy prices. Cost support remained strong: aluminum scrap prices only dropped modestly in line with A00, and tight supply of compliant raw materials further solidified the price floor. On the demand side, weakness persisted, with the off-season deepening and output cuts at end-users like OEMs leading to a pullback in orders. Overall, under the combined effect of cost support and demand constraints, significant upward momentum was lacking, but downside room was also limited. As the ADC12-A00 price spread further recovered, there is a possibility of a slight upward probe in prices. It is recommended to continue monitoring aluminum scrap market dynamics and the pace of recovery in automotive end-use demand.

[Data Source Disclaimer: Other than publicly available information, all other data are processed by SMM based on public information, market communication, and internal SMM database models, and are for reference only. They do not constitute any decision-making advice.]

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
US Manufacturing PMI Dips to 53.8 in July, Services PMI Reaches Eight-Month High
17 hours ago
US Manufacturing PMI Dips to 53.8 in July, Services PMI Reaches Eight-Month High
Read More
US Manufacturing PMI Dips to 53.8 in July, Services PMI Reaches Eight-Month High
US Manufacturing PMI Dips to 53.8 in July, Services PMI Reaches Eight-Month High
The flash US S&P Global manufacturing PMI unexpectedly fell to 53.8 in July, the lowest since March, while market expectations were for a rise to 54.3. In contrast, the flash services PMI came in at 53.6, an eight-month high, lifting the flash composite PMI to 53.6, also an eight-month high, with both readings significantly exceeding market expectations.
17 hours ago
Trump Discusses Iran War Exit Strategy: Military Escalation or Negotiations Amid Ongoing Talks
17 hours ago
Trump Discusses Iran War Exit Strategy: Military Escalation or Negotiations Amid Ongoing Talks
Read More
Trump Discusses Iran War Exit Strategy: Military Escalation or Negotiations Amid Ongoing Talks
Trump Discusses Iran War Exit Strategy: Military Escalation or Negotiations Amid Ongoing Talks
US President Trump, while discussing the "exit strategy" for the war with Iran at the White House, noted that the US faces two options: first, maintain current military operations or even escalate strikes to gradually dismantle Iran’s military capabilities; second, reach an agreement through negotiations. Trump mentioned that although Iran is interested in a deal, it is currently "not ready yet." He stated that the US can either keep the existing pace of operations or choose to intensify strikes more rapidly. Additionally, the US is still negotiating with Iran.
17 hours ago
Midea Air Conditioning Abandons Traditional Cold Year Opening for Retail-Focused Strategy in 2027
17 hours ago
Midea Air Conditioning Abandons Traditional Cold Year Opening for Retail-Focused Strategy in 2027
Read More
Midea Air Conditioning Abandons Traditional Cold Year Opening for Retail-Focused Strategy in 2027
Midea Air Conditioning Abandons Traditional Cold Year Opening for Retail-Focused Strategy in 2027
According to Yingketong, Midea Air Conditioning officially announced in July 2026 that it will no longer initiate the traditional Cold Year Opening for the 2027 new cooling year, instead fully committing to a new strategy of “battling for retail and competing for end-users.” This decision marks a temporary halt to the near three-decade-old model of “collecting payments in the off-season and chasing volume in the peak season” within the air conditioning industry. The “Cold Year Opening” is a unique business rhythm in the air conditioning sector. Typically, starting from H2 (from July/August to October/November), producers hold openings in batches through policy incentives to attract channel merchants to make advance payments and stockpile goods. Then, in H1 of the following year, they concentrate shipments through various large-scale sales promotions, creating a cycle of “pushing inventory in the off-season and chasing volume in the peak season.” The specific measures for Midea Air Conditioning’s cancellation of the new Cold Year Opening include: no longer holding opening meetings that involve centralized channel payments, policy lock-in, and large-scale stockpiling; abolishing the practice of “mandatory advance payments to lock in annual policies”; and shifting to terminal replenishment based on actual demand, with full-cycle normalized policies implemented.
17 hours ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?Sign in here
May auto market: domestic demand under pressure, exports impressive; price difference between A00 aluminum and aluminum scrap narrows, raw materials in tight supply [SMM Cast Aluminum Alloy Morning Comment] - Shanghai Metals Market (SMM)