Economic Advantages Failed to Offset Market Sentiment; Stainless Steel Scrap Declined This Week [SMM Stainless Steel Scrap Market Weekly Review]

Published: Mar 20, 2026 15:28

Save

This week, prices of 304 stainless steel scrap off-cuts in east China strengthened to 10,000-10,100 yuan/mt; prices of stainless steel scrap off-cuts of the same specification in Foshan also rose, with the price range at 9,600-9,900 yuan/mt. In terms of raw material production costs, the current cost of producing stainless steel entirely from stainless steel scrap was about 14,098.03 yuan/mt, while the cost of production using only high-grade NPI was 14,786.98 yuan/mt.

This week, stainless steel scrap prices fell back, mainly driven by macro sentiment disruptions, weak futures, and pressure on both supply and demand. Escalating geopolitical conflicts, coupled with hawkish remarks from the US Fed, dragged SS futures into the doldrums overall, with the bearish impact directly transmitted to the spot market. Stainless steel finished product prices also pulled back across the board, and market pessimism gradually spread. Prices of substitute raw materials also pulled back, while stainless steel mills showed a strong inclination to push for lower prices. NPI traders turned weaker in sentiment and sold at low prices, and the high-grade NPI market also softened. In addition, Tsingshan's April tender price for high-carbon ferrochrome was set low, not only below previous market expectations but also lower than current retail quotations, limiting room for ferrochrome prices to rise and eliminating the support from substitute raw materials for stainless steel scrap. Currently, inventory at stainless steel scrap yards remained relatively high. Coupled with tight tax invoice availability, stainless steel mills were not active in procurement tenders, and the procurement pace continued to slow down. Amid the resonance of multiple bearish factors, stainless steel scrap prices fell in line with futures and finished products. Although stainless steel scrap still maintained a clear economic advantage over high-grade NPI, under the overall weak market atmosphere, cost support was difficult to translate into price support and failed to reverse the downward price trend. Overall, the stainless steel scrap market this week showed a weak pattern of "futures drag, weaker raw materials, and pressure on supply and demand." In the short term, bearish factors are expected to dominate, and stainless steel scrap prices are expected to remain in the doldrums.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

Jul 10, 2026 15:31

Raw material prices generally pull back, unable to reverse the narrowing of stainless steel mill profits [SMM Analysis]

[SMM Analysis] Raw Material Prices Generally Pull Back, Fail to Alleviate Narrowing Stainless Steel Mill Profits Stainless steel prices and production costs both declined this week, squeezing steel mill profit margins. Using 304 cold-rolled products as the calculation benchmark, the profit margin based on current raw material costs stood at 1.71%, while the margin based on inventory cost accounting was 0.48%. On the nickel-based raw material cost side, high-grade NPI prices exhibited a falling and pulling back trend this week. SS futures continued to pull back during the week, drastically increasing cost pressure on China's stainless steel mills. Coupled with pessimistic market expectations for the near term, the low purchase tender price for high-grade NPI announced by a major stainless steel mill drove a broad decline in psychological price levels for market-wide purchases. However, upstream suppliers maintained a relatively strong willingness to hold prices firm, creating significant divergence between upstream and downstream players, leaving transactions mired in a sluggish pattern. As of this Friday, the imported price including tax for Indonesian high-grade NPI with 10%-12% nickel grades fell by 6 yuan per nickel unit, settling at 1,137 yuan/mtu. In the stainless steel scrap market, stainless steel scrap prices drifted lower this week. Dragged down by the decline in SS futures and mills' low high-grade NPI tender prices, overall market sentiment was pessimistic. Mills adopted a cautious purchasing stance, trading activity remained insufficient, and the price center continued to shift downward. Although stainless steel scrap still held an economic advantage over NPI, this could not offset the impact of sluggish end-use demand and pessimistic expectations. Under the resonance of multiple negative factors, the cost support role failed, and prices are likely to continue consolidating on a weak note in the short term. As of this Friday, mainstream 304 off-cuts prices in Shanghai fell by 250 yuan/mt, with the latest quotation at approximately 10,150 yuan/mt. From the chromium-based raw material cost side, high-carbon ferrochrome prices remained stable this week...

Jul 10, 2026 15:31

Jul 10, 2026 15:04

SS Weakness and Sluggish Demand: Stainless Steel Scrap Cost Advantages Fail to Counter Pessimistic Expectations [SMM Stainless Steel Scrap Market Weekly Review]

[SMM Stainless Steel Scrap Market Weekly Review] SS Weakness and Sluggish Demand: Stainless Steel Scrap’s Cost Advantage Struggles Against Bearish Expectations This week, prices of 304 stainless steel scrap off-cuts in east China pulled back, with a quotation range of 10,100-10,200 yuan/mt; prices for the same grade of stainless steel scrap in the Foshan area also fell back, ranging from 10,000-10,300 yuan/mt. From the raw material cost side analysis, the cost of producing stainless steel entirely from stainless steel scrap is currently about 14,218.64 yuan/mt, while the cost of using high-grade NPI reaches 14,972.65 yuan/mt, still maintaining a large cost spread. This week, stainless steel scrap prices drifted lower. SS futures pulled back throughout the week, with bearish sentiment spreading on the futures side, directly dragging down spot prices of stainless steel products slightly. The weak futures set the overall market tone. On the spot side, mainstream stainless steel mills adopted a cautious approach due to higher production costs and uncertain market outlook, as their published high-grade NPI tender prices were low, further weighing on sentiment in the nickel-based raw material and scrap markets. As a result, some stainless steel mills suspended purchases of stainless steel scrap during the week, market buying interest weakened noticeably, overall trading was subdued, and the price center of stainless steel scrap continued to shift lower. Overall, the cost advantage struggled to offset the suppression from bearish market expectations. This week, stainless steel scrap still held a significant economic advantage over high-grade NPI, and the cost substitution logic has not reversed, providing some bottom support for scrap prices. However, overall market sentiment remains weak, steel mill cost pressure…

Jul 10, 2026 15:04

Jul 10, 2026 14:46

[SMM Analysis] Futures Wild Swings and Sluggish Off-Season Trading Accelerate Stainless Steel Inventory Buildup

[SMM Analysis] Futures Wild Swings and Sluggish Off-Season Trading Accelerate Stainless Steel Inventory Buildup SMM July 9 – This week, the pace of stainless steel social inventory buildup quickened, with the increase in core market inventory widening and inventory pressure becoming increasingly evident. Total inventory in the two core markets, Wuxi and Foshan, continued to rise, from 935,400 mt on July 2, 2026 to 943,700 mt on July 9, up 0.89% WoW, further reinforcing the off-season accumulation trend. This week, the stainless steel market remained in the traditional consumption off-season, with persistently weak end-user rigid demand and a marked acceleration in inventory buildup. During the week, SS futures were dominated by liquidity-driven disturbances, retreating after rapid rises amid wild swings. These futures fluctuations repeatedly unsettled spot market sentiment, with only sporadic concentrated transactions occurring and extremely poor sustainability; the market quickly reverted to the mediocre off-season trading activity. Meanwhile, major stainless steel mills ended their earlier efforts to hold prices firm and proactively lowered market guidance prices, further weakening overall bullish sentiment. Downstream end-users grew more cautious, with purchase willingness remaining subdued, sharply reducing the destocking efficiency of spot cargo. On the supply side, although the industry’s monthly production schedule pulled back somewhat, marginally easing the pressure of cargo release, this was insufficient to offset the bearish impact of significantly weaker off-season demand. The supply-demand mismatch intensified, ultimately driving the accelerated accumulation of stainless steel social inventories this week. Overall, the core factors behind the accelerated inventory buildup this week were wild swings in futures unsettling market sentiment, steel mills backing away from price support dampening spot confidence, and persistently sluggish end-user transactions in the off-season. ……

Jul 10, 2026 14:46