[SMM Analysis]Trump Tariffs Drive Cross-Market Arbitrage Copper Rod Export Market Diverges Amid Tight Raw Material Supply

Published: Mar 18, 2025 13:23 (GMT+8)

Source: SMM

Save

With Trump signing an executive order to initiate a Section 232 investigation on copper, market expectations for future copper tariffs have been rising. Meanwhile, this potential tariff threat has also driven up COMEX copper prices, pushing US copper prices and the price spread between COMEX and LME to a periodic high. This not only boosted global copper prices but also led to changes in the recent flow of copper cathode. Against this backdrop, it has also impacted the export quotations of domestic copper cathode rods. Below is a detailed analysis:

With Trump signing the executive order to initiate the Section 232 investigation on copper, market expectations for future copper tariffs have been rising. Meanwhile, this potential tariff threat has also driven up COMEX copper prices, pushing US copper prices and the price spread between COMEX and LME to a periodic high. This not only boosted global copper prices but also led to a recent shift in the flow of copper cathode. Against this backdrop, the export window remains open, import profit/loss has declined, and more foreign-trade copper cathode is flowing to the US market. In the domestic market, imported supplies have tightened, and raw material prices have been rising. Under this influence, domestic copper cathode rod export quotations have shown divergence.

According to SMM statistics, the latest FOB export processing fees for copper cathode rods have generally increased. As of March 15, the FOB export processing fee for 8mm copper cathode rods recorded a minimum of $200/mt, a maximum of $245/mt, and an average of $222.5/mt, up $7.5/mt MoM. The FOB export processing fee for 2.6mm copper cathode rods recorded a minimum of $235/mt, a maximum of $285/mt, and an average of $260/mt, up $12.5/mt MoM.

As shown in the chart above, the average quoted center of export processing fees has risen, primarily due to an increase in high-end prices, while low-end prices have remained stable during their gradual decline, leading to a clear market divergence. The main reason for this divergence lies in the shift to processing trade to capture market share. Some export orders in the market still adopt low-price concessions, while on the other hand, with the overall cost of processing trade rising and import raw material premiums and discounts also increasing under the current market conditions, some enterprises have followed the market trend by raising processing fees to cope with the increased costs. The export market for copper cathode rods is showing an increasingly divergent trend.

It is worth noting that, with copper cathode continuously being siphoned to the US and the opening of the export window, the domestic supply of imported copper may remain tight. Export enterprises of copper cathode rods indicated that they might continue to raise processing fees in line with the increase in premiums and discounts of imported copper. However, under the increasingly evident cut-throat competition in processing fees, the export market for copper rods may continue to develop in a differentiated manner.
SMM will continue to monitor the export trends of copper rods and the overseas market conditions for you.

Copper

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

2 hours ago

Sulphuric Acid Shortage Emerges as a Constraint on Zambia’s Copper Growth

Zambia’s sulphuric acid shortage is becoming a growing constraint on copper production and refining. Jubilee Metals reported acid costs rising by more than 200% in Q4 FY2026, while Sable cathode output fell to 250 t from 361 t in Q3. Government data also showed small-scale copper production down 35.2% YoY in H1 2026, highlighting the sector’s exposure to tight acid availability and higher processing costs.

2 hours ago

3 hours ago

Selkirk Copper Targets H2 2028 Restart of Minto Mine Following Positive PEA

Selkirk Copper Mines has outlined a potential restart of the past-producing Minto copper-gold-silver mine in Yukon, Canada, following the completion of a Preliminary Economic Assessment (PEA) that supports first concentrate production in the second half of 2028. The PEA outlines a 13-year mine life based on combined open-pit and underground mining, with operations designed around an average mining and milling rate of 4,100 mt/day. At peak production, the project is expected to produce approximately 27,200 mt/year of copper-equivalent contained in concentrate, equivalent to around 48,700 mt/year of high-grade copper-gold-silver concentrate. Initial capital required to re-establish production is estimated at C$186 million. Using the study's planning prices of US$5.00/lb copper, US$3,600/oz gold and US$50/oz silver, the PEA estimates an after-tax NPV at a 7% discount rate of C$494 million, an after-tax IRR of 47.8% and a payback period of approximately 1.9 years from first production. Minto benefits from substantial existing infrastructure from its previous operations, including a 4,100 mt/day processing plant as well as existing open-pit and underground infrastructure. Selkirk Copper said assessments of the site's existing infrastructure and equipment found that the majority remains in good working order and requires only minor attention and refurbishment. The company is targeting first concentrate production in H2 2028, followed by full ramp-up of mining, milling and concentrate production by H1 2029. A feasibility study is scheduled to begin in Q4 2026, while amended permit applications are also expected to be submitted during the fourth quarter. Selkirk Copper said a restart decision is targeted following completion of the feasibility study and receipt of permit amendments in H2 2027. The Minto PEA outlines a potential pathway for a previously producing copper operation to return to the market by 2028, supported by existing processing and mining infrastructure that could reduce the capital and construction requirements compared with a greenfield project. However, the 27,200 mt/year peak production figure represents copper-equivalent contained in concentrate rather than contained copper alone. The restart also remains subject to further feasibility work, permitting and project execution, making progress toward a restart decision in H2 2027 an important milestone to watch.

3 hours ago

Tschudi Copper Mine Targets Early-2027 Mining Restart in Namibia

Consolidated Copper Corp (CCC) is targeting an early-2027 restart of open-pit mining at the Tschudi copper mine in northern Namibia, with an estimated US$30–40 million of development capital required to bring mining operations back online. Under the planned heap-leach restart, Tschudi is expected to reach run-rate copper cathode production of more than 14,000 mt/year over an initial 10-year mine life. CCC expects to complete a definitive feasibility study for the heap-leach mining restart in September 2026, with open-pit mining targeted to recommence in early 2027. The planned restart relates specifically to open-pit mining at Tschudi. Copper processing operations were restarted in 2024 using existing stockpiles, with CCC reporting production of more than 7,600 mt of copper cathode conforming to LME Grade A specifications as of June 2026. Tschudi previously produced approximately 75,000 mt of copper cathode between 2015 and 2020 before being placed on care and maintenance. The operation already has significant processing infrastructure in place, including a 2.88 million mt/year SX/EW plant. According to CCC, the US$30–40 million restart capital would primarily cover dewatering, mining mobilisation and demobilisation, a mobile crushing plant and development of a leach pad. CCC is also studying a larger expansion targeting Tschudi's sulphide resources. The concept includes construction of a 3 million mt/year flotation plant alongside the existing SX/EW operation, potentially increasing average annual production to approximately 30,000 mt of copper-equivalent over more than 10 years. The expansion remains under study and is separate from the planned heap-leach mining restart. The planned restart of open-pit mining at Tschudi could strengthen Namibia's copper supply by supporting run-rate cathode production of more than 14,000 mt/year if the project proceeds according to schedule. Existing SX/EW infrastructure and the relatively modest US$30–40 million restart capital requirement could support a faster return to mining compared with a greenfield development. However, the early-2027 restart remains a company target, with completion of the definitive feasibility study and subsequent mine mobilisation among the key milestones to watch.

3 hours ago