Sulphuric Acid Shortage Emerges as a Constraint on Zambia’s Copper Growth

Published: Sep 25, 2026 16:43 (GMT+8)

Save

Zambia’s sulphuric acid shortage is becoming a growing constraint on copper production and refining. Jubilee Metals reported acid costs rising by more than 200% in Q4 FY2026, while Sable cathode output fell to 250 t from 361 t in Q3. Government data also showed small-scale copper production down 35.2% YoY in H1 2026, highlighting the sector’s exposure to tight acid availability and higher processing costs.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

SMM ANALYSIS | AFRICA COPPER

Sulphuric Acid Shortage Emerges as a Constraint on Zambia’s Copper Growth

Tight domestic acid availability is already showing up in policy action, small-scale mining weakness and refinery cost pressure, with Jubilee Metals reporting a more than 200% increase in acid costs during Q4 FY2026.

25 September 2026 | SMM Analysis

>200%

Q4 FY2026 acid cost increase

Jubilee Metals

250 t

Sable Q4 cathode output

down from 361 t in Q3

-35.2%

Small-scale copper production

Zambia H1 2026 YoY

~1.1 Mt

Kansanshi acid output

2025 production

Zambia’s copper sector is expanding investment and processing capacity, but sulphuric acid availability is becoming a visible constraint for parts of the domestic value chain. Ministry of Mines data show national copper production rising only 0.45% year on year to 447,181 t in H1 2026, while small-scale copper production fell 35.2%. The Ministry attributed the small-scale decline partly to inadequate domestic sulphuric acid supply and the delayed end of the rainy season.

Recent company disclosures add a more immediate operating signal. Jubilee Metals reported that domestic acid availability in Zambia reduced significantly during Q4 FY2026, with acid costs rising by more than 200% and diesel costs increasing by 90%. The company said these conditions had a marked impact on production at its Sable Refinery and contributed to temporary closures among some metal processors in its operating area.

┃ Jubilee data show pressure reaching the refining stage

Sable produced 1,207 t of copper cathode in FY2026, up 17.5% from 1,027 t in FY2025. However, the quarterly profile weakened toward year-end: cathode output rose from 217 t in Q1 to 379 t in Q2, eased to 361 t in Q3 and then fell to 250 t in Q4. Q4 production was therefore about 31% below Q3 and 34% below the Q2 peak.

The Q4 fall should not be attributed to acid alone. Jubilee also reported operational factors including extended maintenance at Roan and pre-stripping work at Molefe. The more defensible conclusion is that acid availability and cost pressure became one of several operating constraints, and one that Jubilee explicitly linked to Sable’s performance during the quarter.

┃ The constraint is uneven across Zambia’s copper producers

The impact of tight sulphuric acid supply is not uniform. Large integrated operations with captive smelting and acid production are less exposed to the merchant market than smaller leach operators and independent processors. This helps explain why national copper production still edged higher while small-scale output fell sharply.

First Quantum’s disclosures illustrate the difference. Kansanshi generated approximately 1.1 million t of sulphuric acid in 2025, almost all of which was consumed on site in leaching circuits for cathode production. Following the smelter expansion, Acid Plant 5 could generate supplementary acid for internal use or external sale, depending on mine geology and processing requirements.

This means Zambia can be a significant acid producer and still have a shortage in the merchant market. Installed acid capacity is not the same as freely available supply. Internal consumption, ore type, smelter availability, contractual allocation, transport economics and local pricing all affect how much acid reaches third-party consumers.

┃ Upstream copper units are growing faster than saleable output

Jubilee’s production mix also shows why copper growth is not only a mining issue. Combined copper units from Roan and Molefe reached 3,739 t in FY2026, up 225.0% year on year. Roan total production increased 145.5% to 2,823 t. Yet final copper products produced for sale increased only 1.3% to 2,120 t, while Sable cathode production rose 17.5%.

Part of this gap reflects the build-up of oxide concentrate fines awaiting processing through Roan’s newly commissioned dewatering circuit and the fact that Jubilee reports different streams at different stages of the value chain. Even so, the contrast highlights the broader issue: converting mined or concentrated copper units into saleable metal depends on refinery availability, reagents, energy and logistics, not only ore supply.

┃ SMM outlook

Through the remainder of 2026, sulphuric acid availability is likely to remain an important variable for Zambia’s oxide and mixed-ore copper producers. The March export-permit system may help retain more acid for domestic users, but it does not create additional supply. In the near term, the market balance will depend on smelter operating rates, internal acid consumption at integrated mines and the amount of surplus product that producers are willing and able to release into the merchant market. For smaller leach operators, delivered availability and price could therefore remain more important than Zambia’s headline installed acid capacity.

There are signs that the supply side could improve. First Quantum has said the Kansanshi smelter expansion and Acid Plant 5 provide the potential to generate supplementary sulphuric acid, depending on mine geology and internal processing requirements. The expanded smelter is configured for around 1.5 million tonnes per year of acid capacity, including Acid Plant 5 at approximately 900 tonnes per day. However, Kansanshi consumed almost all of the roughly 1.1 million tonnes it produced in 2025 on site, which means additional capacity will not automatically translate into an equivalent increase in merchant supply.

The restart of KCM’s Nchanga Smelter in September also introduces a potential source of relief. The 311,000-tonne-per-year smelter returned after a 106-day rehabilitation programme, and KCM identifies sulphuric acid as one of the products manufactured at the Nchanga complex. If the smelter and associated acid systems operate consistently, additional output could improve domestic availability. The extent of that benefit will depend on KCM’s own leach requirements, operating rates and how much acid is ultimately made available to third-party customers.

Demand for acid could rise at the same time. Jubilee expects Sable to receive feed from a growing portfolio of Jubilee-controlled sources as Molefe develops and Project G moves toward targeted development from February 2027. Higher oxide and mixed-feed throughput would increase the importance of reliable reagent supply. Unless merchant acid availability expands alongside this processing growth, the market could remain vulnerable to renewed price spikes or temporary throughput constraints even as Zambia’s mined copper base increases.

Looking ahead to 2027, the acid balance could become an increasingly important differentiator between integrated and merchant-dependent producers. A sustained improvement in smelter uptime, additional third-party acid sales and effective domestic allocation could allow smaller mines and independent processors to recover output and participate more fully in Zambia’s copper-growth cycle. If the market remains tight, however, production growth is more likely to remain concentrated among large integrated operators that can secure acid internally. Key indicators to watch will be merchant acid prices, smelter operating rates, export-permit flows, third-party acid sales and Sable’s ability to convert rising upstream feed into saleable copper products.

Sources: Jubilee Metals Group, FY2026 Production and Operational Update, 14 September 2026; Zambia Ministry of Mines and Minerals Development, H1 2026 mining-sector update; First Quantum Minerals, Q1 2026 results and Zambia operations presentation; Zambia Ministry of Commerce, Trade and Industry, Sulphuric Acid Export Permit notice; Konkola Copper Mines corporate information and ZNBC report on the September 2026 Nchanga Smelter restart; SMM calculations based on public source data.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

1 hour ago

Selkirk Copper Targets H2 2028 Restart of Minto Mine Following Positive PEA

Selkirk Copper Mines has outlined a potential restart of the past-producing Minto copper-gold-silver mine in Yukon, Canada, following the completion of a Preliminary Economic Assessment (PEA) that supports first concentrate production in the second half of 2028. The PEA outlines a 13-year mine life based on combined open-pit and underground mining, with operations designed around an average mining and milling rate of 4,100 mt/day. At peak production, the project is expected to produce approximately 27,200 mt/year of copper-equivalent contained in concentrate, equivalent to around 48,700 mt/year of high-grade copper-gold-silver concentrate. Initial capital required to re-establish production is estimated at C$186 million. Using the study's planning prices of US$5.00/lb copper, US$3,600/oz gold and US$50/oz silver, the PEA estimates an after-tax NPV at a 7% discount rate of C$494 million, an after-tax IRR of 47.8% and a payback period of approximately 1.9 years from first production. Minto benefits from substantial existing infrastructure from its previous operations, including a 4,100 mt/day processing plant as well as existing open-pit and underground infrastructure. Selkirk Copper said assessments of the site's existing infrastructure and equipment found that the majority remains in good working order and requires only minor attention and refurbishment. The company is targeting first concentrate production in H2 2028, followed by full ramp-up of mining, milling and concentrate production by H1 2029. A feasibility study is scheduled to begin in Q4 2026, while amended permit applications are also expected to be submitted during the fourth quarter. Selkirk Copper said a restart decision is targeted following completion of the feasibility study and receipt of permit amendments in H2 2027. The Minto PEA outlines a potential pathway for a previously producing copper operation to return to the market by 2028, supported by existing processing and mining infrastructure that could reduce the capital and construction requirements compared with a greenfield project. However, the 27,200 mt/year peak production figure represents copper-equivalent contained in concentrate rather than contained copper alone. The restart also remains subject to further feasibility work, permitting and project execution, making progress toward a restart decision in H2 2027 an important milestone to watch.

1 hour ago

Tschudi Copper Mine Targets Early-2027 Mining Restart in Namibia

Consolidated Copper Corp (CCC) is targeting an early-2027 restart of open-pit mining at the Tschudi copper mine in northern Namibia, with an estimated US$30–40 million of development capital required to bring mining operations back online. Under the planned heap-leach restart, Tschudi is expected to reach run-rate copper cathode production of more than 14,000 mt/year over an initial 10-year mine life. CCC expects to complete a definitive feasibility study for the heap-leach mining restart in September 2026, with open-pit mining targeted to recommence in early 2027. The planned restart relates specifically to open-pit mining at Tschudi. Copper processing operations were restarted in 2024 using existing stockpiles, with CCC reporting production of more than 7,600 mt of copper cathode conforming to LME Grade A specifications as of June 2026. Tschudi previously produced approximately 75,000 mt of copper cathode between 2015 and 2020 before being placed on care and maintenance. The operation already has significant processing infrastructure in place, including a 2.88 million mt/year SX/EW plant. According to CCC, the US$30–40 million restart capital would primarily cover dewatering, mining mobilisation and demobilisation, a mobile crushing plant and development of a leach pad. CCC is also studying a larger expansion targeting Tschudi's sulphide resources. The concept includes construction of a 3 million mt/year flotation plant alongside the existing SX/EW operation, potentially increasing average annual production to approximately 30,000 mt of copper-equivalent over more than 10 years. The expansion remains under study and is separate from the planned heap-leach mining restart. The planned restart of open-pit mining at Tschudi could strengthen Namibia's copper supply by supporting run-rate cathode production of more than 14,000 mt/year if the project proceeds according to schedule. Existing SX/EW infrastructure and the relatively modest US$30–40 million restart capital requirement could support a faster return to mining compared with a greenfield development. However, the early-2027 restart remains a company target, with completion of the definitive feasibility study and subsequent mine mobilisation among the key milestones to watch.

1 hour ago

KCM Restarts Nchanga Smelter Following US$40 Million Rehabilitation

Konkola Copper Mines (KCM) has restarted operations at its Nchanga Smelter in Zambia following the completion of a US$40 million rehabilitation programme, marking the facility's first major refurbishment in more than eight years. The smelter, which has an annual production capacity of 311,000 mt, was shut down for 106 days to allow comprehensive rehabilitation works to be carried out. The shutdown was initially planned to last 60 days but was extended after inspections identified additional critical works that needed to be completed. KCM Deputy Chief Executive Officer Satish Kumar said the rehabilitation forms part of efforts to rebuild the company and secure the long-term future of its operations following Vedanta Resources' return to KCM. According to KCM Smelter and Refinery Director Yoram Kapai, more than 1,500 people from KCM and its business partners participated in the rehabilitation programme. The company said the works were completed without any major injuries. The restart restores operations at a key processing facility within KCM's integrated copper operations in Zambia. Attention will now turn to the smelter's operational performance following the extended maintenance period and KCM's broader efforts to rebuild production across its mining and processing assets. The restart of the Nchanga Smelter removes a temporary processing constraint at KCM following the 106-day shutdown. With annual capacity of 311,000 mt, the facility is an important part of KCM's copper processing chain. The US$40 million rehabilitation could support improved operational reliability following years of limited major refurbishment, while the pace at which KCM increases mine supply and utilisation of its processing assets will remain important in determining the impact on Zambia's overall copper production.

1 hour ago