[SMM Hot Topic] 2024 Annual Review of Rebar Market Trends

Published: Jan 9, 2025 17:47
Reviewing 2024, affected by weak end-use demand and surplus capacity, the national average rebar price fluctuated downward, with the overall price center shifting lower. Specifically, the national average rebar price in 2024 was 3,575 yuan/mt, down 322 yuan/mt compared to 2023, with a YoY decline of 8.26%.

Reviewing 2024, affected by weak end-use demand and overcapacity, the national average rebar price fluctuated downward, with the overall price center shifting lower. Specifically, the national average rebar price in 2024 was 3,575 yuan/mt, down 322 yuan/mt from 2023, representing a YoY decline of 8.26%. The national rebar price trend in 2024 can be roughly divided into five phases: Phase 1 (January-March), demand recovery fell short of expectations, leading to weaker prices; Phase 2 (April-May), concentrated demand release drove spot price increases; Phase 3 (June-mid-September), entering the off-season for demand, coupled with market panic triggered by the transition between old and new national standards, spot prices dropped significantly to the annual low; Phase 4 (late September-early October), concentrated release of domestic and international macro favourable policies, with low inventory fundamentals driving both volume and price increases for rebar; Phase 5 (October-December), policy implementation fell short of expectations, combined with significantly weaker winter stockpiling enthusiasm compared to previous years, prices pulled back and fluctuated rangebound.

Figure 1  National Average Rebar Price Trend in 2024

Phase 1 (January-March): The "Golden March" peak season demand fell short, coupled with Two Sessions policies not exceeding expectations, leading to weaker spot prices. On the macro front, the Two Sessions did not introduce any policies exceeding expectations, resulting in insufficient market confidence. On the fundamentals side, futures prices declined, downstream procurement was cautious, and the resumption of construction in many inland areas was slower than expected, leading to weaker-than-expected demand release. This caused pressure on both in-plant and social inventories, with spot prices under pressure and weakening.

Phase 2 (April-May): Concentrated demand release during the "Silver April" season drove spot price increases. In April, the eighth round of coke price cuts was implemented, steel mills operated profitably, and blast furnace resumption activity increased, providing stronger support for ore prices. Additionally, new real estate projects increased slightly MoM, with funding and demand conditions significantly improving compared to March. This led to effective destocking of construction materials, driving spot price increases.

Phase 3 (June-mid-September): The off-season for demand, combined with the transition between old and new national standards, triggered market panic, leading to a significant drop in spot prices. Starting in late May, as the northern farming season and south China's rainy season arrived, the construction materials market entered the traditional off-season for demand. Additionally, construction site restrictions during the national college entrance exams further suppressed end-use demand, resulting in continuous inventory buildup for rebar and significant pressure on spot prices. On June 25, the new national standard for rebar was introduced. In east China, warehouses imposed requirements for the outflows from warehouses of old-standard resources within a limited period, prompting price reductions to avoid the risk of destocking difficulties during the off-season. This exacerbated market panic, accelerating the decline in rebar spot prices to the annual low.

Phase 4 (late September-early October): With low inventory fundamentals and concentrated release of domestic and international macro favourable policies, rebar volume and price increased. On the fundamentals side, the continuous decline in spot prices significantly reduced steel mill profits, with rebar production losses generally ranging from 150-200 yuan/mt. Many steel mills proactively conducted maintenance and production cuts. Thanks to the rapid decline in production and the arrival of the "September-October peak season," rebar destocking accelerated, and fundamentals improved significantly. On the macro front, the US Fed implemented its first interest rate cut, and domestic macro favourable policies were introduced, including lowering central bank policy rates, reducing mortgage rates on existing home loans, and emphasizing "stabilizing the real estate market, strictly controlling new supply, optimizing existing supply, improving quality, and increasing loans for white-listed projects." This series of favourable information shifted market sentiment from pessimistic to highly optimistic. Combined with the support of low inventory fundamentals, rebar prices achieved a strong rebound, recovering nearly half a year's losses within just one week.

Phase 5 (mid-October-December): Policy implementation fell short of expectations, combined with significantly weaker winter stockpiling enthusiasm compared to previous years, leading to price pullbacks and rangebound fluctuations. After the National Day holiday, multiple meetings fell short of expectations, cooling capital market sentiment. Producers were eager to sell and realize profits, causing rebar prices to pull back. After November, the US presidential election and domestic debt resolution policies were successively implemented, shifting market expectations to neutral. The macro perspective temporarily entered a vacuum period, with valuations returning to fundamentals. On the supply side, environmental protection inspections and routine winter maintenance kept steel mill construction material production relatively low, resulting in relatively small overall supply pressure. On the demand side, the construction materials market entered the off-season in Q4. Northern projects nearly halted due to cold wave weather, and winter stockpiling enthusiasm was weaker than in previous years. Overall, the rebar market experienced weak supply and demand, with inventory remaining low. Fundamental imbalances were not prominent, and spot prices fluctuated rangebound.

Looking ahead to 2025, on the demand side, rebar's primary downstream demand comes from construction steel, closely tied to real estate and infrastructure. In 2024, China's real estate policies were further relaxed, but the actual effects were not significant. Real estate market data, from sales to new starts, continued to deteriorate, making it difficult to claim a bottom has been reached, with further downside room. However, considering the low base of new real estate starts this year, the decline in new starts is expected to narrow in 2025. The infrastructure sector, under the pressure of debt resolution and changes in investment structure, is likely to see limited growth, making it difficult to offset the weakness in real estate steel demand. Therefore, in 2025, rebar demand is highly likely to remain weak. Against the backdrop of continued declines in end-use demand, steel mill profits may shrink further, leading to passive production cuts for rebar. Overall, rebar is expected to continue the weak supply and demand pattern in 2025. With ample raw material supply, cost support for rebar is likely to remain unstable, and the price center may shift further downward.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[MIIT: 15th Five-Year Plan for Small and Medium-Sized Enterprises to Be Released Soon]
1 hour ago
[MIIT: 15th Five-Year Plan for Small and Medium-Sized Enterprises to Be Released Soon]
Read More
[MIIT: 15th Five-Year Plan for Small and Medium-Sized Enterprises to Be Released Soon]
[MIIT: 15th Five-Year Plan for Small and Medium-Sized Enterprises to Be Released Soon]
The State Council Information Office held a press conference on the theme "Starting the 15th Five-Year Plan Period" on the 26th, briefing on efforts to fully implement the 15th Five-Year Plan and accelerate the promotion of new-type industrialization. Xin Guobin, Vice Minister of the Ministry of Industry and Information Technology, stated that small and medium-sized enterprises are numerous and wide-ranging, affecting not only technological innovation and industry chain resilience but also employment and people's livelihoods. During the 15th Five-Year Plan period, the development of small and medium-sized enterprises faces new situations, opportunities, and challenges. MIIT, together with multiple departments, has jointly formulated the 15th Five-Year Plan for the development of small and medium-sized enterprises, which will be officially released soon.
1 hour ago
[Analysis of Key Statistical Enterprises' Plate and Strip Production and Sales in July 2026]
1 hour ago
[Analysis of Key Statistical Enterprises' Plate and Strip Production and Sales in July 2026]
Read More
[Analysis of Key Statistical Enterprises' Plate and Strip Production and Sales in July 2026]
[Analysis of Key Statistical Enterprises' Plate and Strip Production and Sales in July 2026]
In July, the production of medium-thickness plate mills, hot strip mills, and cold strip mills of key statistical enterprises all edged up YoY. Production of most major plates declined YoY, among which wind power steel plates and boiler and container plates saw larger declines, while shipbuilding plates saw a larger increase. Product prices, extra-thick plates and medium-thickness plates rose MoM, while prices of other products declined. From January to July, the cumulative production of medium-thickness plate mills and cold strip mills rose YoY, while that of hot strip mills declined YoY. Among major plates, the production of shipbuilding plates and container plates saw a larger increase, while that of boiler and container plates and steel plates for engineering machinery saw a larger decline.
1 hour ago
【SMM Analysis】EAF Operating Rate Rises 0.76% During Off-to-Peak Season Transition
2 hours ago
【SMM Analysis】EAF Operating Rate Rises 0.76% During Off-to-Peak Season Transition
Read More
【SMM Analysis】EAF Operating Rate Rises 0.76% During Off-to-Peak Season Transition
【SMM Analysis】EAF Operating Rate Rises 0.76% During Off-to-Peak Season Transition
As of August 25, the operating rate of 50 major construction-steel-focused EAF steel mills nationwide stood at 32.97%, up 0.76% week-on-week; capacity utilization rate was 32.97%, up 1.67% from the previous period; average daily construction steel output reached 73,400 tonnes, up 3,700 tonnes week-on-week.
2 hours ago
[SMM Hot Topic] 2024 Annual Review of Rebar Market Trends - Shanghai Metals Market (SMM)