As manufacturers faced significant inventory pressure, glass prices for new orders in July significantly reduced again [SMM Analysis]

게시됨: Jul 4, 2024 13:52
출처: SMM
In July, domestic glass prices continued to decline, but the prices of first-tier glass producers have not yet been finalized.

In July, domestic glass prices continued to decline, but the prices of first-tier glass producers have not yet been finalized. As of July 4, the new prices for glass are as follows: 2.0mm single-layer coated (15.0-16.0 yuan/square meter); 2.0mm double-layer coated (16.0-17.0 yuan/square meter); 3.2mm single-layer coated (24.0-26.0 yuan/square meter); 3.2mm double-layer coated (25.0-27.0 yuan/square meter). At the beginning of July, domestic PV glass prices fell again, with the prices of 2.0mm single and double-layer coated glass dropping by 1 yuan/square meter this week; the prices of 3.2mm single and double-layer coated glass decreased by 0.5 yuan/square meter.

The domestic glass prices in early July still saw a significant decline. The price of 2.0mm glass dropped by 1.0 yuan per square meter. However, this round of price decline mainly affected second- and third-tier glass producers, while the prices of leading producers were not yet finalized at the beginning of July and were still under negotiation with module companies. The main reason for this price drop was the significant increase in the overall inventory of PV glass in the domestic market. According to SMM statistics, as of July 4, the average inventory days of PV glass in the domestic market is 29.1 days, with some second- and third-tier producers having inventories exceeding 30 days. Under the pressure of high inventory levels, the atmosphere for glass producers to offer discounts and take orders in July was strong, with companies lowering prices to the cost line to prioritize shipments.

From the perspective of supply and demand, in July, one new and one cold-repaired kiln were ignited domestically, with new capacity at 1,200 mt/day and cold-repaired capacity at 650 mt/day. Meanwhile, kilns ignited in April began to ramp up production, leading to a rapid increase in glass supply in July. However, on the demand, although PV module production slightly increased, the increase was minimal. It is expected that the supply in July will still be in surplus, and the surplus will expand compared to June, weakening price support.

In summary, for the price forecast in July, SMM believes that the transaction prices and high prices of glass will continue to decline, with low-price support gradually emerging, but the decline will be limited. With the increase in supply and weak demand, glass inventories are expected to continue rising, and the bargaining power of leading glass producers is also expected to weaken, with high-price support decreasing. Therefore, it is expected that the high prices still have room to fall. SMM predicts a decrease of 0.5 yuan/square meter.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
7시간 전
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
더 보기
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
7시간 전
[SMM PV 플래시]
9시간 전
[SMM PV 플래시]
더 보기
[SMM PV 플래시]
[SMM PV 플래시]
한 선도 석유화학 공장이 어제 한 생산 재개 라인을 중단했고, 오늘 다른 라인에서 LDPE 생산을 시작했다. 단기적으로 이 기업의 생산 일정은 고압 소재 라인 1개와 PV 소재 라인 1개의 병행 생산을 유지할 것이다. 이번 라인 조정 이후 해당 공장의 PV 소재 생산 규모는 다소 축소되었다.
9시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
9시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
더 보기
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
2026년 8월 31일, 화넝 산시 션무 10만 kW 태양광(PV) 발전 프로젝트가 전 용량 계통 연계를 달성했으며, 이는 화넝 산시 신에너지 지사의 누적 설비용량이 300만 kW를 넘어섰음을 의미한다. 션무 프로젝트 착수 이후, 산시 북부의 잦은 강풍·모래먼지 날씨, 복잡한 지형·지세, 제한된 시공 여건, 촉박한 공기 등 여러 도전에 직면한 가운데 모든 건설 인력이 힘을 모아 난관을 극복하고 우수성을 추구했다. 안전생산과 품질관리 요구사항을 엄격히 이행하고, 시공 계획을 과학적으로 조율했으며, 시공 공정 흐름을 최적화해 승압변전소 건설, 태양광 패널 지지대 설치, 모듈 포설, 집전선로 설치, 설비 디버깅 및 교정 등 핵심 업무를 질서 있게 추진했다. 정밀 관리, 표준화 시공, 상시적 문제 해결을 통해 시공 과정의 각종 어려움과 병목을 효율적으로 해소하고 공정 추진을 안정적으로 가속화했으며, 최초 계통 연계부터 전 용량 계통 연계까지의 완벽한 마무리를 성공적으로 달성해 화넝의 속도, 화넝의 책임, 화넝의 품질을 충분히 입증했다
9시간 전
As manufacturers faced significant inventory pressure, glass prices for new orders in July significantly reduced again [SMM Analysis] - Shanghai Metals Market (SMM)