SMM Morning Comment For SHFE Base Metals September 5

Published: Sep 05, 2023 10:00 (GMT+8)
Source: SMM
LME copper prices opened at $8438/mt and closed at $8450/mt in overnight trading, a drop of 0.49%, with the low-end of $8416.5/mt and the high-end of $8462/mt.

SHANGHAI, Sep 5 (SMM) –

Copper

LME copper prices opened at $8438/mt and closed at $8450/mt in overnight trading, a drop of 0.49%, with the low-end of $8416.5/mt and the high-end of $8462/mt. Trading volume was 11,000 lots, and open interest stood at 283,000 lots. The most active SHFE 2310 copper contract prices opened at 69210 yuan/mt and finished at 69410 yuan/mt overnight, down 0.44%, with the low-end of 69150 yuan/mt and the high-end of 69410 yuan/mt. Trading volume was 19,000 lots and open interest stood at 162,000 lots. On the macro front, no important data has been released in the United States. In Europe, its central bank president Lagarde still did not hint at how the European Central Bank will act next week in her latest speech, while ECB Governing Council member Centeno said there is a risk of "doing too much" on interest rates. On Fundamentals, As of Monday September 4, SMM copper inventories across major Chinese markets stood at 96,700 mt, up 8,100 mt from last Friday and 21,600 mt higher from the same period last year. Inventories in east China increased due to increased copper imports, and downstream consumer demand has been weak due to high copper prices; inventories increased in south China due to the arrivals of domestically produced copper and poor consumption. Consumption can hardly recover in the near future. In terms of price, the market still needs to wait for more guidance, and it is expected that there will be limited room for copper price increases in the near future. The copper prices will remain at high levels.

Aluminum

Overnight, the most-traded SHFE 2310 aluminium contract opened at 18,950 yuan/mt, with the lowest and highest prices at 18,890 yuan/mt and 19,040 yuan/mt before closing at 19,025 yuan/mt, up 60 yuan/mt or 0.32% from the previous trading day. LME aluminium opened at $2,238/mt on Monday with its high and low at $2,242/mt and $2,195/mt respectively before closing at $2,200.5/mt.

On the macro side, domestic favorable policies wield boosting effects on markets significantly. But the vacillating attitude of the Fed to raise interest rates added to macro uncertainty. In the fundamentals, recent concentrated arrivals of aluminum ingots increased social inventory accumulation, weakening the support for aluminum prices. The short-term aluminum price is expected to face downward upward, but it is necessary to closely observe the consumption changes in the peak season.

Lead

Overnight, LME lead prices opened at $2,250.5/mt and closed at $2202/mt, down $53.5/mt, or 2.37%. Bears inreased their positions. The most active SHFE lead contract prices opened at 16959 yuan/mt and fell 390 yuan/mt or 2.3% to close at 16575 yuan/mt last evening, with the low-end of 16450 yuan/mt. Open interest decreased 1816 lots to 93,000 lots.

Zinc

LME zinc prices opened at $2488/mt last evening and closed down $20.5/mt or 0.82% at $2466.5/mt. Trading volume decreased to 5757 lots, and open interest increased by 4496 lots to 201,000 lots. LME zinc inventory remained flat. The market is waiting for more data guidance. The most active SHFE 2310 zinc contract prices opened at 21290 yuan/mt and lost 15 yuan/mt or 0.07% to settle at 21250 yuan/mt in overnight trading. Trading volumes decreased to 49141 lots and open interest increased 384 lots to 105,000 lots. The state of domestic social inventory destocking has turned to accumulation. But as the current smelter production profit exceeds 800 yuan/mt, output may remain at a high level.

Tin

Overnight, SHFE 2310 tin contract price increased a little after opening, once hitting a high of 222,820 yuan/mt. The price finally closed at 221,140 yuan/mt, up 1.44%.

Spot premiums and discounts changed little on September 4 morning. Small brand tin ingots were offered at premiums of 0-300 yuan/mt, and premiums of 300-500 yuan/mt for delivery brands, premiums of 800-1,000 yuan/mt for Yunxi brand, and discounts of 300-200 yuan/mt for imported brands. Downstream purchases were sluggish yesterday, even after SHFE tin price fell during the daytime session.

Nickel

The most traded SHFE nickel contract opened at 169,780 yuan/mt and closed at 170,710 yuan/mt at the night session on September 4, an increase of 2,510 yuan/mt from the previous trading day. The trading volume and the open interest increased by 75,681 lots and 4,181 lots respectively. The US ADP employment data released last Wednesday night and the August jobless rate released on Friday night both indicate that the current US economy is not resilient enough, which may influence the Fed’s interest rate hike process in September. In terms of fundamentals, MHP prices fluctuated upward under the dual support of domestic supply shortage and Indonesian nickel ore export quota issue. Trades in spot market remained thin yesterday. In summary, nickel prices may be volatile in the future.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
19 hours ago
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
Read More
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
KGHM and South32 have broken ground on a fourth grinding line at the Sierra Gorda copper-molybdenum mine in Chile's Atacama region. The US$725 million expansion runs for three years from January 2027, with completion by late 2029 and full output in H2 2030. Ore processing capacity rises 26%, from 131,000 tonnes per day to 165,000 tpd. Annual copper output is projected to climb from 165,000 tonnes in 2025 to 195,000 tonnes, with 6,000 tonnes of molybdenum, 58,000 ounces of gold and 1.7 million ounces of silver as by-products. The project creates over 900 direct jobs and is funded from operating cash flow and debt. Unit operating costs are expected to fall about 10%.
19 hours ago
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
20 hours ago
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Read More
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Emerita Resources has provided an update on the Preliminary Feasibility Study (PFS) for its Iberian Belt West polymetallic project in Spain, saying the study is well advanced but remains under final technical review.​ The company said the review process has been expanded to include additional technical and quality-assurance oversight before publication. As a result, Emerita now expects the PFS to be released in the coming weeks rather than within the previously indicated timeframe.​ Iberian Belt West hosts copper, zinc, lead, gold and silver mineralization and is one of Emerita’s principal development-stage assets in Spain. The PFS is expected to provide updated detail on the proposed mine plan, processing configuration, capital requirements, operating costs and project economics.​ Emerita said the additional review work is intended to ensure consistency and completeness across the technical disciplines contributing to the study before it is finalized.​ The company did not announce a revised specific publication date, and no new production, capital or economic figures were disclosed in the latest update.​ The extended review delays the next major technical milestone for Iberian Belt West, but the company continues to indicate that the PFS is nearing completion. For the copper market, the significance of the study will depend on the production profile and project economics ultimately disclosed, particularly the contribution of copper relative to the project’s other payable metals. Attention will therefore remain on the timing of the PFS release and whether the final study materially changes the project’s development outlook.
20 hours ago
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
20 hours ago
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Read More
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Minerals has reported additional drill results from its 2026 exploration programme at the Carmacks copper-gold project in Yukon, Canada, with new step-out drilling extending mineralization at Zone 2000S beyond the boundaries of the existing Mineral Resource.​ Drill hole CD-26-058 returned 75.55 metres grading 1.19% copper, 0.97 g/t gold, 10.4 g/t silver and 335 ppm molybdenum, equivalent to 2.18% copper-equivalent. The interval included 48.66 metres grading 1.61% copper, 1.39 g/t gold, 15.1 g/t silver and 475 ppm molybdenum, equivalent to 3.03% CuEq.​ Within the same hole, a higher-grade interval of 14.50 metres returned 2.30% copper, 2.68 g/t gold, 29.5 g/t silver and 1,015 ppm molybdenum, equivalent to 5.08% CuEq.​ A second hole, CD-26-059, intersected 93.99 metres grading 0.96% copper, 0.70 g/t gold, 4.6 g/t silver and 919 ppm molybdenum, equivalent to 1.94% CuEq. This included 63.97 metres at 1.26% copper, 0.96 g/t gold, 6.3 g/t silver and 1,049 ppm molybdenum, equivalent to 2.52% CuEq.​ Cascadia said the latest results continue to expand mineralization at Zone 2000S beyond the limits of the current Mineral Resource and highlight the higher-grade nature of the extension. The reported drill intervals represent drilled thicknesses, with true widths estimated at approximately 60–70%.​ The latest step-out results indicate that copper-gold mineralization at Zone 2000S extends beyond the boundaries of the current Carmacks Mineral Resource. The broad intervals and higher-grade internal zones could support future resource expansion if additional drilling confirms continuity. However, the new intersections have not yet been incorporated into an updated Mineral Resource Estimate, meaning their ultimate impact on project scale and mine planning remains to be determined.
20 hours ago