SMM Morning Comments (May 29): Base Metals Closed Mostly with Gains as Macro Headwinds Ease

게시됨: May 29, 2023 10:09
SHANGHAI, May 29 (SMM) – LME and SHFE base metals closed mostly with losses at last Friday’s night session.

SHANGHAI, May 29 (SMM) – LME and SHFE base metals closed mostly with losses at last Friday’s night session. On the macro front, the simplified version of the US debt ceiling agreement was initially formed. In addition, the US GDP and employment data in the first quarter showed that the US economy was relatively resilient, thus macro sentiment improved.

Copper: LME copper prices closed at $8,139/mt last Friday evening, a rise of 1.86%. Trading volume was 17,000 lots and open interest stood at 259,000 lots. SHFE 2307 copper contract finished at 65,090 yuan/mt last Friday evening, up 1.86%. Trading volume was 62,000 lots, and open interest stood at 204,000 lots. On the macro front, the U.S. dollar index rose after the April PCE data was released. The core PCE price index in April increased by 4.7% year-on-year, exceeding market expectations. The market bets that the Fed will keep high interest rates for a longer period of time. On the fundamentals, as of May 26, SMM copper inventories in major Chinese markets fell 4,300 mt to 118,400 mt from last Monday, down 5,100 mt from two Fridays ago. Inventories have fallen for three consecutive weeks. There was an inflow of imported copper in east China, and the high spot premiums in east China attracted inflows of goods from various places. Therefore, the inventory decline was small. In south China, due to the small price difference between copper cathode and copper scrap, downstream manufacturers prefer to purchase copper cathode, leading to big inventory decline. In addition, it is expected that more imported copper will flow into the domestic market this week. The market has recently focused on the U.S. debt ceiling negotiations, and the good news will give some impetus to the rebound in copper prices.

Aluminium: The most-traded SHFE 2307 aluminium contract opened at 18,110 yuan/mt at last Friday’s night session, with its low and high at 18,060 yuan/mt and 18,180 yuan/mt before closing at 18,155 yuan/mt, up 295 yuan/mt or 1.65%.

LME aluminium opened at $2,219/mt last Friday, with its low and high at $2,209/mt and $2,265/mt respectively before closing at $2,243/mt, up $29/mt or 1.31%.

On the macro front, the simplified version of the US debt ceiling agreement was initially formed. In addition, the US GDP and employment data in the first quarter showed that the US economy was relatively resilient, thus macro sentiment improved. Low aluminium ingot inventory and little hope of smelters in Yunnan resuming production soon will support aluminium prices. However, poor consumption in the off-season will keep aluminium prices in check.

Lead: Last Friday, the LME lead opened at $2,060/mt and hit the lowest point at $2,057/mt during the Asian trading hours, but then went upward and hit the highest point at $2,089.5/mt due to the strong US dollar index, and finally close at $2,075.5/mt, up 0.63%. The open interest increased 1,154 lots to 115,000 lots compared with the previous trading day, and the trading volume decreased 2,913 lots to 3,833 lots.

The most-traded SHFE 2307 lead contract opened at 15,250 yuan/mt and closed at 15,240 yuan/mt after hitting the lowest point at 15,220 yuan/mt and the highest point at 15,260 yuan/mt, down 0.07%. The open interest decreased 642 lots to 54,446 lots compared with the previous trading day, and the trading volume decreased 23,522 lots to 20,140 lots.

Zinc: LME zinc opened at $2,253/mt last Friday, and rose to around $2,340/mt before closing at $2,338/mt, an increase of $80.5/mt or 3.57%. Trading volume fell to 9,852 lots, and open interest rose 1,803 lots to 193,000 lots. LME zinc inventory rose 11,100 mt to 74,550 mt.

During last Friday’s night session, the most-traded SHFE 2307 zinc contract moved up after opening at 19,300 yuan/mt, closing at 19,555 yuan/mt, up 585 yuan/mt or 3.08%. Trading volume fell to 127,000 lots, and open interest decreased by 4,118 lots to 138,000 lots. Although the Fed's hawkish remarks continued, the news that the debt ceiling agreement was basically reached eased the market jitters. The US core PCE price index recorded a higher-than-expected monthly rate of 0.3% in April, thus the market still needs to be wary of the pressure brought by possible interest rate hikes.

Tin: Last Friday night, SHFE 2307 tin contract prices dipped rapidly to 200,440 yuan/mt and rebounded, but then fell again and finally closed at 201,360 yuan/mt, down 0.79%.

Nickel: On May 19, G7 stated that it would continue to work hard to reduce Russia's income from metal trade, which, on the other hand, increased its imports from other countries and regions. Therefore, although the geopolitical issues remain unresolved, the pure nickel demand from various countries is still stable. If LME’s ban on Russian metals had not happened, the impact of the G7 sanctions on nickel prices would be relatively limited. However, the market’s bets on a 25-basis-point rate hike in June rose to over 50%, suppressing the prices. NORNICKEL nickel premiums rose further on shrinking market supply last week. And the supply tightness will not be eased until this week. Almost all NPI factories stopped quoting and took a wait-and-see approach. The stocks held by NPI traders kept growing owing to the arrival of imported spots. On the demand side, according to SMM research, some agents bought some spot stainless steel, but the end demand did not pick up significantly. Recently, as the futures prices continued to fall, prices of spot stainless steel delivered for warrants stood lower, which, coupled with the stainless steel mills’ reduction in shipments, drove down the social inventory. Nickel prices may bear some pressure from the inflow of imported goods.

[Disclaimer: The above representation and data is based on market information SMM believes to be reliable at the time of acquiring as well as the comprehensive assessment by SMM research team, and any and all information provided in this article is for reference only. This article does not constitute a direct recommendation for investment or any decisions in any form and clients shall act on their own discreet and any decisions made by clients are not within the responsibility of SMM.]


데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
12시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
14시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
14시간 전
SMM Morning Comments (May 29): Base Metals Closed Mostly with Gains as Macro Headwinds Ease - Shanghai Metals Market (SMM)