Will Stainless Steel Futures Prices Stop Plunging amid Massive Production Cuts?

Đã xuất bản: Apr 4, 2023 17:26
Nguồn: SMM
Stainless steel futures prices are expected to maintain a downward trend this week.

SHANGHAI, Apr 4 (SMM) - Following the intensive production cuts of multiple stainless steel plants, another plant in east China, according to SMM survey, also suspended its production recently and planned to be closed for 10 days, affecting roughly 20,000 mt of 300-series stainless steel output. In response, the tumble of stainless steel futures prices finally stopped as of April 3.

In fact, since the beginning of this year, stainless steel futures prices have been on a persisting downward path with monthly declines of 5.07% in February and 10.84% in March respectively. During the day session of April 3, the most active stainless steel contract hit a new low of 14,600 yuan/mt since April 30, 2021, and then rebounded to close up 0.03% at 14,810 yuan/mt.

Spot market: The average spot price of 304/2B coil-raw (Wuxi) stood at 15,050 yuan/mt as of April 3, down 1.63% from the previous trading day. SMM research showed that the spot prices of stainless steel in the Wuxi and Foshan markets were on the wane. The transactions in the stainless steel spot market were still thin, and the spot prices declined further as cost weakened. SMM estimates that the spot prices will still have room to fall in the near term.

Supply: In terms of stainless steel output, according to SMM’s preliminary research, the total output of stainless steel plants across China may have increased slightly in March by about 2.9 million mt or 3.58% month-on-month. The mainstream 200-series stainless steel mills may have maintained loose schedule of production, so their output will not grow sharply.

In early March, a large stainless steel mill carried out overhaul due to equipment failure, which, though, will have a limited impact on the output. On the contrary, some stainless steel mills, including some state-owned ones, may have seen rising output with capacity ramped up. Therefore, the output of 300-series stainless steel in China will grow slightly in March. In addition, Indonesian stainless steel plants also had plans to ramp up the production of 300-series.

In March, the operating rates of 400-series stainless steel mills will be maintained at the current level, and the output will not grow sharply. The high stainless steel inventory will still curb the prices from a further rise.

According to SMM research, a stainless steel mill in east China that suspended production in March may have resumed production now, while another mill in east China was shut down. The 300-series output is expected to be cut by about 20,000 mt.

Inventory: As of September 30, the social inventory of stainless steel totalled 785,600 mt, a decrease of about 0.59% on the week. The inventory of 200-series stainless steel fell 0.79% on a weekly basis to 187,700 mt, 300-series dropped 0.36% to 472,100 mt, and 400-series lost 1.18% to 125,800 mt.

On the whole, the social inventory of stainless steel was slowly digested last week. Although the inventory in March was lower compared with February, it still increased significantly year-on-year. The excess supply and slow recovery of demand caused the prices of various raw materials to shrink, thus the collapsed cost support took a heavy toll on stainless steel spot prices. SMM expects that the spot prices of stainless steel will remain weak in the short term, and the social inventory will be falling slowly and return to normal levels in April.

Demand: The traditional peak season in March and April seemed absent as the demand remained sluggish.

Costs: NPI prices trended lower since last Wednesday, which dragged down the nickel ore prices. Meanwhile, stainless steel transactions also became sluggish, and the futures prices fell. SMM expects NPI prices to run with occasional drops.

Ferrochrome supply was in a surplus, but the retail sales were scarce. Chrome ore supply also remained tight, and the purchasing volume of high-priced chrome ore futures was low. Ferrochrome prices will fluctuate with some downward potential if the plants do not cut their production intensively despite firm chrome ore prices. Costs of stainless steel may drop further.

To sum up, the supply glut still persists amid the slow decline in inventory, while the cost gradually weakens, failing to support stainless steel prices. Therefore, stainless steel futures prices are expected to maintain a downward trend this week. 

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
【SMM Tin nhanh Niken】Thời tiết El Niño làm gia tăng rủi ro sản xuất tại IMIP
15 giờ trước
【SMM Tin nhanh Niken】Thời tiết El Niño làm gia tăng rủi ro sản xuất tại IMIP
Đọc thêm
【SMM Tin nhanh Niken】Thời tiết El Niño làm gia tăng rủi ro sản xuất tại IMIP
【SMM Tin nhanh Niken】Thời tiết El Niño làm gia tăng rủi ro sản xuất tại IMIP
Hiện tượng El Niño năm 2026 tiếp tục gia tăng cường độ, với các cơ quan giám sát khí hậu quốc tế cho biết đây có thể là một trong những đợt El Niño mạnh nhất từng được ghi nhận. Indonesia hiện đang trải qua nắng nóng và khô hạn nghiêm trọng, với dự báo El Niño sẽ đạt đỉnh vào tháng 9. Theo SMM, tình trạng thiếu nước hiện tại tại IMIP chủ yếu ảnh hưởng đến sản xuất thép carbon, trong khi sản xuất niken chưa bị tác động. Tuy nhiên, nếu thời tiết khô hạn và tình trạng thiếu nước kéo dài, áp lực gia tăng lên nguồn cung nước công nghiệp có thể làm tăng nguy cơ cắt giảm sản lượng niken.
15 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
17 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
Đọc thêm
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
Bảng dưới đây cho thấy biến động giá kim loại đen và kim loại màu trên SHFE và DCE vào ngày 02/09/2026
17 giờ trước
[SMM Tin nhanh Niken] Cập nhật hàng ngày — ngày 2 tháng 9 năm 2026
17 giờ trước
[SMM Tin nhanh Niken] Cập nhật hàng ngày — ngày 2 tháng 9 năm 2026
Đọc thêm
[SMM Tin nhanh Niken] Cập nhật hàng ngày — ngày 2 tháng 9 năm 2026
[SMM Tin nhanh Niken] Cập nhật hàng ngày — ngày 2 tháng 9 năm 2026
Về mặt giá cả, tuần này là tuần đầu tiên của chu kỳ định giá HMA nửa đầu tháng 9, với HMA ở mức 16.733,33 đô la Mỹ/tấn. Giá trung bình CIF quặng niken Indonesia được điều chỉnh ở cả ba cấp: • Ni 1,3%: Giá trung bình CIF ở mức 30 USD/tấn ướt • Ni 1,4%: Giá trung bình CIF ở mức 52,8 USD/tấn ướt • Ni 1,5%: Giá trung bình CIF ở mức 59,2 USD/tấn ướt ________________________________________ Cập nhật Chính sách Indonesia & DSI ICOMEX — Ngày 2 tháng 9 năm 2026 Thị trường quặng niken Indonesia vẫn đang trong giai đoạn chờ đợi, theo dõi sát sao các phê duyệt RKAB tiếp theo và khả năng điều chỉnh hạn ngạch. Trong khi đó, DSI đang thúc đẩy phát triển ICOMEX, nền tảng kỹ thuật số nhằm giám sát và quản lý xuất khẩu khoáng sản và hàng hóa chiến lược. Nền tảng này dự kiến sẽ tích hợp dần các dữ liệu xuất khẩu trọng yếu, bao gồm hợp đồng, giá cả, cấp quặng, mã HS, tàu, điểm đến và thông tin thanh toán. Việc phát triển ICOMEX được kỳ vọng sẽ cải thiện tính minh bạch của dữ liệu xuất khẩu, tăng cường giám sát quản lý và theo dõi giá cả, đồng thời cung cấp cho chính phủ cái nhìn toàn diện hơn về dòng chảy xuất khẩu khoáng sản. Điều kiện thời tiết tại các vùng sản xuất niken chính nhìn chung vẫn trong tầm kiểm soát, mặc dù mưa lớn cục bộ vẫn có thể gây gián đoạn tạm thời cho hoạt động khai thác và hậu cần. Thị trường cũng đang chờ đợi khả năng sửa đổi công thức HPM đối với quặng limonit. Bất kỳ thay đổi nào đối với cơ chế định giá, đặc biệt là cách xử lý kim loại đi kèm và các hệ số hiệu chỉnh, đều có thể ảnh hưởng đến giá limonit và tính kinh tế của nguyên liệu cho HPAL. Nhìn chung, thị trường vẫn thận trọng, với các phê duyệt RKAB, tiến độ phát triển ICOMEX, điều kiện thời tiết và khả năng sửa đổi HPM limonit là những yếu tố chính cần theo dõi trong ngắn hạn.
17 giờ trước
Will Stainless Steel Futures Prices Stop Plunging amid Massive Production Cuts? - Shanghai Metals Market (SMM)