Imports of Unwrought Aluminium Alloy Fell MoM, while Exports Increased Nearly 50% MoM

Đã xuất bản: Aug 24, 2022 10:36 (GMT+8)
Nguồn: SMM
Traders are bullish on the market outlook, so the new orders have been rising recently. It is expected that the imported arrivals of aluminium alloy ingots after September will be more than those in July and August.

SHANGHAI, Aug 24 (SMM) - Customs data showed that China imported 102,900 mt of unwrought aluminium alloy in July 2022, a year-on-year increase of 17% and a month-on-month decline of 13%. The imports totalled 770,700 mt from January to July, up 34.5% on the year. In terms of export, China exported 25,500 mt of unwrought aluminium alloy in July, up 179% from the previous year and 49.9% from the previous month. From January to July, the total exports stood at 126,300 mt, a year-on-year growth of 35.7%.

The top three suppliers of unwrought aluminium alloy imports in July were Malaysia, South Korea and Thailand, the imports of which accounted for nearly half of the total volume. Among them, the import volume from Malaysia remained the largest, which was 30,600 mt, down 10,000 mt from June; imports from South Korea amounted to 10,700 mt, an increase of 2,000 mt from June. It should be pointed out that the imports from South Korean returned to more than 10,000 mt, but was still lower than the normal level; imports from Thailand increased slightly from June by 1,300 mt to 10,200 mt.. In addition, July marked the third consecutive month when the imports from Russian Federation hovered around 10,000 mt. Import volume from other countries such as Vietnam and India declined to varying degrees compared the the month before. As for exports, China exported 7,700 mt of unwrought aluminium alloy to Japan in July, which was flat from that in June, and the exports to South Korea increased to 6,300 mt

China’s top three importing provinces of unwrought aluminium alloys in July were Zhejiang, Guangdong, and Jiangsu, accounting for more than 70% of the total, though the ratio was slightly lower than that in June. Specifically, the imports of Zhejiang, Guangdong, and Jiangsu provinces stood at 43,900 mt, 23,700 mt, 7,000 mt respectively, accounting for 43%, 23%, and 7% respectively. Overall, the domestic imports of unwrought aluminium alloy in July dipped month-on-month but rose year-on-year. At the same time, the exports climbed year-on-year and month-on-month. In terms of imports, most of the aluminium alloy ingots that arrived at ports in July were under the orders placed after April. Considering that new orders have shrunk after April due to sustained import losses, the arrivals in July and August are expected to dwindle. Since mid-July, the aluminium prices, which had been falling for nearly two months, finally rallied, and the domestic prices of ADC12 secondary aluminium alloy also began to rise. The import losses gradually eased and the profits emerged. Meanwhile the import window was also opened since early August for half a month. As of August 23, imported ADC12 secondary aluminium alloy from Malaysia was quoted at $2,400/mt, up from $2,100/mt in July, and the import losses were once again expanded to 300-400 yuan/mt. However, traders are bullish on the market outlook, so the new orders have been rising recently. It is expected that the imported arrivals of aluminium alloy ingots after September will be more than those in July and August.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
5 giờ trước
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Đọc thêm
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Ngày 20/9, máy cán thô tấm dày thuộc dự án sản xuất thông minh vật liệu mới nhôm công suất 720.000 tấn/năm của Công ty TNHH Công nghệ Vật liệu mới Hà Nam Yirui chính thức đi vào sản xuất. Với tổng vốn đầu tư 1,5 tỷ nhân dân tệ, dự án tận dụng mặt bằng nhà xưởng hiện có để xây dựng dây chuyền cán nóng liên tục “1+4” tiên tiến quốc tế, được hỗ trợ bởi các thiết bị gia công nhôm hàng đầu ngành như lò nung lại kiểu đẩy. Dự án còn xây dựng hệ thống IoT công nghiệp có khả năng giám sát thời gian thực và điều chỉnh động các thông số sản xuất cốt lõi như lực cán và nhiệt độ, đảm bảo hiệu quả chất lượng ổn định của các sản phẩm nhôm cao cấp và không ngừng nâng cao thị phần các sản phẩm giá trị gia tăng cao.
5 giờ trước
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
5 giờ trước
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Đọc thêm
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea có kế hoạch mở rộng hợp tác với Glencore sang lĩnh vực tinh luyện alumina, năng lượng, vàng và kim loại cơ bản, nhằm tăng nguồn thu từ khai khoáng, thúc đẩy chế biến tại chỗ và công nghiệp hóa tài nguyên khoáng sản, đồng thời tăng cường hợp tác với các thị trường và doanh nghiệp khai khoáng quốc tế tại Trung Quốc, Trung Đông và nhiều nơi khác.
5 giờ trước
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
5 giờ trước
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Đọc thêm
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Ngày 21/9, lễ khởi công Giai đoạn II (Dự án A3) của Công ty TNHH Nhôm Đỉnh Phong (Campuchia), công ty con của Tập đoàn Địa Hàng, đã được tổ chức. Tọa lạc tại Đặc khu kinh tế Quốc lộ 6, tỉnh Kampong Cham, Campuchia, Nhôm Đỉnh Phong chủ yếu hoạt động trong lĩnh vực nghiên cứu phát triển và sản xuất thanh nhôm hợp kim cao cấp, nhôm định hình cao cấp và các sản phẩm phụ trợ cho xe năng lượng mới, được trang bị đầy đủ quy trình sản xuất và thiết bị bao gồm nấu chảy, đùn ép, anot hóa, gia công sâu, gia công chính xác và xử lý bề mặt. Khi Giai đoạn II đi vào hoạt động toàn bộ, công suất sản xuất hàng năm sẽ đạt 200.000 tấn, với giá trị sản lượng hàng năm lên tới 700 triệu USD. Giai đoạn II (Dự án A3) được quy hoạch bao gồm xưởng gia công xe năng lượng mới rộng 24.340 m² (nhà kết cấu thép một tầng), xưởng đùn ép rộng 15.291 m² và các công trình phụ trợ như nhà văn phòng, nhà bảo vệ và trạm phân phối điện.
5 giờ trước