[SMM Analysis] Nickel Sulfate in China is in short supply in June and last month. It may continue to go to the warehouse in July.

Published: Jul 09, 2020 23:38 (GMT+8)
SMM July 9, June 2020, China's nickel sulfate continued to go to the warehouse, the monthly supply and demand balance shows the removal of inventory of 1381 metal tons. China's nickel sulfate may continue to go to storage in July, but as some of the intermediates that did not arrive on time in June will arrive in Hong Kong in July, some nickel sulfate plants will have a more adequate supply of raw materials, and there are plans to increase production slightly. SMM expects the national nickel sulfate removal inventory to decrease by 18.2% month-on-month in July.

SMM, July 9th,

From the supply side,

In June, China produced 9800 tons of metal nickel sulfate, with a physical volume of 45000 tons, an increase of 5.14% from the previous month and a decrease of 20.52% from the same period last year. Among them, the output of battery grade nickel sulfate is 39800 physical tons, and that of electroplating grade nickel sulfate is 5200 physical tons. The output of nickel sulfate increased slightly in June compared with the previous month, which is mainly related to the resumption of production in the No. 1 Nickel Sulfate Plant in North China. In June, the order situation of downstream precursors showed no obvious signs of improvement, and the market demand for nickel sulfate was weak; the transaction price of battery-grade nickel sulfate market was still close to the cost or upside down, and some manufacturers chose to do processing for some traders with advantages in raw material cost to maintain factory operation. It is understood that some of the intermediate products that did not arrive on time in June will arrive in Hong Kong in July, and some nickel sulfate plants will have a more adequate supply of raw materials, and there are plans to increase production slightly, so it is expected that the national output of nickel sulfate will continue to increase slightly in July 2020 from the previous month, an increase of 5.78% to 10500 tons of metal.

From the demand side,

In June 2020, China's total demand for nickel sulfate was 11329 metal tons, of which the output of ternary precursors corresponding to the demand for nickel sulfate was 8703 metal tons, up 17% from the previous month and 23% from the same period last year. SMM expects orders for ternary precursors to continue to rise slightly in July, with total demand for nickel sulfate increasing to 11636 metal tons.

 

Taken together,

In June 2020, China's nickel sulfate continued the trend of going to the warehouse last month, and the inventory balance of that month showed the removal of 1381 metal tons. China's nickel sulfate may continue to go to storage in July, but as some of the intermediates that did not arrive on time in June will arrive in Hong Kong in July, some nickel sulfate plants will have a more adequate supply of raw materials, and there are plans to increase production slightly. SMM expects the national nickel sulfate removal inventory to decrease by 18.2% month-on-month in July.

 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
16 hours ago
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
Read More
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
Tubacex issued its October tube alloy surcharges. In euros, hot-/cold-finished 316/316L fell from €5.07/€5.59 per kg (€5,070/€5,590 per tonne) to €5.05/€5.56 per kg (€5,050/€5,560 per tonne). High Mo content materials, with Mo above 2.5%, declined from €5.26/€5.79 to €5.23/€5.76 per kg. Surcharges for 2205 and 2507 were unchanged, while 254 SMO rose from €9.64/€10.62 to €9.67/€10.65 per kg. SMM analysis: most Mo-bearing tube grades were flat or slightly lower, while 254 SMO moved higher, indicating differentiated cost transmission across grades.
16 hours ago
[SMM Stainless Steel Flash] India stainless scrap prices diverge as 304 eases with nickel and tight 316 holds firm
16 hours ago
[SMM Stainless Steel Flash] India stainless scrap prices diverge as 304 eases with nickel and tight 316 holds firm
Read More
[SMM Stainless Steel Flash] India stainless scrap prices diverge as 304 eases with nickel and tight 316 holds firm
[SMM Stainless Steel Flash] India stainless scrap prices diverge as 304 eases with nickel and tight 316 holds firm
India's stainless steel scrap market moved in different directions in the week ended 1 October. Domestic 304 scrap prices edged lower and import offers followed, while 316 prices held steady in both the domestic and import markets. Weaker LME nickel prices weighed on 304 sentiment, and buyers stuck to immediate requirements as trading slowed over the festive period. Tight availability limited downside for 316. On procurement, short processing windows following the government's relaxation of Pre-Shipment Inspection Certificate (PSIC) requirements, along with additional import costs, continued to limit mills' flexibility. Some mills are evaluating billets, slabs and nickel pig iron (NPI) as alternatives to scrap to manage input costs. Looking further out, the EU's proposal to restrict metal waste exports to India under its new Waste Shipment Regulation (WSR) would, if adopted, further narrow India's scrap import options. In the near term, 304 scrap faces mild downward pressure if nickel stays weak, while 316 is expected to remain firm as long as supply stays tight. PSIC developments and the relative economics of billets and NPI will be key factors to watch.
16 hours ago
【Flash | Metallus Raises October Molybdenum Surcharge Component for 300M Steel】
16 hours ago
【Flash | Metallus Raises October Molybdenum Surcharge Component for 300M Steel】
Read More
【Flash | Metallus Raises October Molybdenum Surcharge Component for 300M Steel】
【Flash | Metallus Raises October Molybdenum Surcharge Component for 300M Steel】
Metallus set its October raw-material surcharges for Oct 1–30. The Mo component for 300M steel rose 0.52% to $15.176/cwt, about $334.57/t of steel, from $15.098/cwt, or $332.85/t. The listed total surcharge increased 1.03% to $45.054/cwt. Scrap rose to $17.750/cwt, while the separate energy surcharge for bars and tubes fell from $1.296/cwt, about $28.57/t, to $0.050/cwt, or $1.10/t.
16 hours ago