SMM Evening Comments (Feb 11)

Published: Feb 11, 2019 18:48

Save

SMM Evening Comments

SHANGHAI, Feb 11 (SMM) – SHFE base metals traded mixed on the first trading day after the Chinese New Year break. Lead saw the largest loss of 3.8%, zinc dropped 3.1% and aluminium fell 1.1% while copper nudged up 0.04%, tin rose 1.4% and nickel jumped 2%.

The ferrous complex, except for coking coal, traded higher. Iron ore rose close to 8%, rebar surged 2.4%, hot-rolled coil advanced 2.3% and coke gained 0.8%.

Copper: The SHFE 1903 contract lost most of its gains from a higher open today, and inched up 0.04% to close at 48,190 yuan/mt. It failed to remain above the 60-day moving average and the upper Bollinger band but support was seen at the five- and 40-day moving averages. Post-holiday consumption has yet to kick in as the holiday festivities continued. The contract is expected to try to remain above 48,100 yuan/mt tonight.

Aluminium: The SHFE 1903 contract weakened 1.1% to end at 13,315 yuan/mt today. The buildup of short positions accounted for the decline in SHFE aluminium. It is likely to see further downside room tonight after social inventories of primary aluminium in China substantially expanded over the holiday.

Zinc: Losses in LME zinc and gains in social inventories during the CNY break weighed on zinc prices today, with the SHFE 1903 contract ending 3.1% lower at 21,610 yuan/mt. This forced the contract to give up most gains made in the last week before the holiday. The contract is expected to try to stand firm above 21,500 yuan/mt tonight.

Nickel: A surge in iron ore prices bolstered the SHFE 1905 contract to a high of 101,950 yuan/mt today after a higher open. It then relinquished some gains to finish 2% higher at 100,350 yuan/mt as longs took profits. Potential output growth of nickel pig iron and uncertain consumption of stainless steel after the CNY break kept longs cautious. The contract is expected to try to remain above 100,200 yuan/mt tonight.

Lead: After a negative open, the SHFE 1903 contract lost 3.8% to close at 16,770 yuan/mt today, as shorts aggressively loaded up their bets. Losses in its LME counterpart and gains in social inventories in China over the CNY break accounted for the sharp decline in SHFE lead. The contract is expected to hover around lows tonight.

Tin: The SHFE 1905 contract jumped past the 149,000 yuan/mt and 150,000 yuan/mt levels to close today 1.4% higher at 150,500 yuan/mt. Its strong LME counterpart is expected to keep it at highs in the near term with resistance at 152,000 yuan/mt.

Evening comments Copper Aluminium Zinc Nickel Tin Lead

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

41 mins ago

Gold, Silver, Platinum, Palladium Dance Together, Precious Metals Sector Surges Nearly 8%, Shengda Resources and Sichuan Gold Hit Daily Limit [SMM Flash News]

41 mins ago

1 hour ago

Trace Palladium Impurities May Drive High Catalytic Activity in Platinum Systems, Study Shows

[SMM Express] Researchers have identified that trace palladium impurities, rather than platinum itself, may be responsible for high catalytic activity observed in several platinum-based systems, highlighting the importance of accurate PGM identification in catalyst development. The study, “Pitfalls in Platinum Catalysis..” investigated platinum catalysts used in important carbonylation reactions. Through inductively coupled plasma (ICP) analysis and controlled experiments with ultrapure platinum, researchers found that palladium contamination at levels as low as 10 parts per million (ppm) was sufficient to drive the targeted transformations, while pure platinum demonstrated significantly lower catalytic efficiency. The findings challenge previous assumptions regarding platinum’s role in these reactions and highlight the need for rigorous metal purity verification when evaluating noble metal catalysts. Palladium-based catalysts remain widely used in industrial carbonylation processes, including the production of methyl propionate for methacrylate polymer applications, due to their high activity and selectivity. The study does not indicate an immediate change in platinum or palladium market fundamentals. However, it reinforces palladium’s significant catalytic capability and may influence future research into PGM catalyst optimisation. As industries continue to seek cost-effective and efficient alternatives given palladium price volatility, understanding of platinum and palladium performance could affect long-term catalyst selection strategies.

1 hour ago

2 hours ago

[SMM Precious Metals Express]

The most-traded GFEX palladium futures contract, PD2610, rose 8% intraday to close at 329.65 yuan/g, up 8.51%.

2 hours ago