Continuous Inventory Reduction: Why Has SHFE Copper Not Shifted to a Backwardation Structure? [SMM Analysis]

게시됨: Dec 23, 2024 10:04
출처: SMM
Recently, the market has seen a continuous decline in inventories, yet the SHFE copper structure remains in a contango state and has not shifted to backwardation.

Recently, the market has seen a continuous decline in inventories, yet the SHFE copper structure remains in a contango state and has not shifted to backwardation. What are the reasons behind this? Below is a detailed analysis.

Recently, SHFE copper inventories have continued to decline, mainly due to the following reasons:

1. Seasonal recovery in consumption: Year-end orders in downstream copper industries (such as the power and home appliance sectors) have increased, driving up consumption and leading to robust spot demand.

2. After the settlement of long-term copper concentrate contract BM, domestic smelters are expected to face losses in smelting in 2025, resulting in a generally tight market supply.

3. Tight copper scrap supply has highlighted the substitution effect of copper cathode.

So why has the market not shifted to a backwardation structure? The main reasons are as follows:

1. Wide-open import window: Fluctuations in the RMB exchange rate and a decline in international copper prices have significantly increased the profitability of imported copper, leading to a large influx of near-port B/Ls and bonded warehouse warrants.

2. Significant new capacity from domestic smelters in 2025 is expected to ease long-term supply pressure, dampening the upward momentum of near-month contracts. This is particularly evident as inventory buildup is anticipated during the Chinese New Year in January.

3. Cautious attitudes among market traders toward stockpiling have limited the rise in spot premiums. This has made the pressure of near-month contracts on far-month contracts less pronounced, hindering the formation of a backwardation structure.

Looking ahead, whether SHFE copper will shift to a backwardation structure in 2025 depends on the following key factors:

1. The pace of imported copper arrivals and the production growth of domestic smelters will be critical variables affecting inventory levels and price structures.

2. If consumption continues to grow beyond expectations, it may drive an expansion in spot premiums, thereby shifting the futures structure toward backwardation.

3. Further stimulus policies from China and improvements in economic data could boost market sentiment, providing support for copper prices.

At present, the market still needs more time to digest changes in inventory and supply, while awaiting further confirmation from the demand side. In the short term, the SHFE copper market is likely to remain in a contango structure. However, the impact of raw materials on smelters is expected to intensify in 2025, making the post-holiday structure particularly worth monitoring.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
11시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
13시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
13시간 전
Continuous Inventory Reduction: Why Has SHFE Copper Not Shifted to a Backwardation Structure? [SMM Analysis] - Shanghai Metals Market (SMM)