December New Glass Orders Finalised, Joint Efforts to Refrain from Price Cuts Lead to Price Increase [SMM Analysis]

게시됨: Dec 12, 2024 11:14
출처: SMM
On December 10, the new glass order prices are as follows: 2.0mm single-layer coating (11.5-12 yuan/m²); 2.0mm double-layer coating (12.5-13 yuan/m²); 3.2mm single-layer coating (19.5-20.5 yuan/m²); 3.2mm double-layer coating (20.5-21.5 yuan/m²).

On December 10, the new glass order prices are as follows: 2.0mm single-layer coating (11.5-12 yuan/m²); 2.0mm double-layer coating (12.5-13 yuan/m²); 3.2mm single-layer coating (19.5-20.5 yuan/m²); 3.2mm double-layer coating (20.5-21.5 yuan/m²). Currently in December, some domestic module enterprises have finalised new order prices, with mainstream transaction prices for glass rising to 12 yuan/m², up 0.5 yuan/m² from November.

Specifically, regarding the price trend, the overall domestic glass price range in December remains unchanged, but the transaction center has shifted upwards. Previously, most module enterprises maintained a wait-and-see approach and were conservative about raising glass quotes. No transactions were made after the new order prices were announced at the end of November. However, as time progressed, the glass enterprises' December quotes became more uniform, with no low-price bidding occurring. Some module enterprises faced resistance in price suppression and began to make just-in-time procurement, leading to the mainstream transaction center rising to 12 yuan/m², with very few low-price transactions in the market.

Regarding inventory, domestic glass industry inventory began to decrease in November, with leading enterprise inventories also showing a significant decline. The days of inventories dropped to around 32 days, and the days of inventories for second-tier mainstream glass enterprises fell to just over 20 days, easing the inventory pressure.

Supply side, domestic PV glass monthly production in November continued to decrease, down 8.4% MoM from October. The operating rate of producers for domestic PV glass decreased in November, mainly due to weakened demand from modules, causing a tense supply sentiment. Cold repair capacity increased during the month, with leading enterprises reducing daily melting capacity by 3,000 mt/day, and further reductions are expected. It is anticipated that nearly 5,000 mt/day of daily melting capacity will undergo cold repair in December, and glass production is expected to continue decreasing in December.

In summary, for the price forecast for the remainder of December, SMM believes prices will remain stable. Although there is an expected decline in demand as module enterprises approach the holiday season, the recent expansion in the scale of domestic glass production cuts will likely maintain a balanced supply and demand situation. Additionally, the high natural gas prices will strongly support glass costs, leading to a predominantly sideways price movement.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
1시간 전
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
더 보기
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
1시간 전
[SMM PV 플래시]
3시간 전
[SMM PV 플래시]
더 보기
[SMM PV 플래시]
[SMM PV 플래시]
한 선도 석유화학 공장이 어제 한 생산 재개 라인을 중단했고, 오늘 다른 라인에서 LDPE 생산을 시작했다. 단기적으로 이 기업의 생산 일정은 고압 소재 라인 1개와 PV 소재 라인 1개의 병행 생산을 유지할 것이다. 이번 라인 조정 이후 해당 공장의 PV 소재 생산 규모는 다소 축소되었다.
3시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
3시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
더 보기
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
2026년 8월 31일, 화넝 산시 션무 10만 kW 태양광(PV) 발전 프로젝트가 전 용량 계통 연계를 달성했으며, 이는 화넝 산시 신에너지 지사의 누적 설비용량이 300만 kW를 넘어섰음을 의미한다. 션무 프로젝트 착수 이후, 산시 북부의 잦은 강풍·모래먼지 날씨, 복잡한 지형·지세, 제한된 시공 여건, 촉박한 공기 등 여러 도전에 직면한 가운데 모든 건설 인력이 힘을 모아 난관을 극복하고 우수성을 추구했다. 안전생산과 품질관리 요구사항을 엄격히 이행하고, 시공 계획을 과학적으로 조율했으며, 시공 공정 흐름을 최적화해 승압변전소 건설, 태양광 패널 지지대 설치, 모듈 포설, 집전선로 설치, 설비 디버깅 및 교정 등 핵심 업무를 질서 있게 추진했다. 정밀 관리, 표준화 시공, 상시적 문제 해결을 통해 시공 과정의 각종 어려움과 병목을 효율적으로 해소하고 공정 추진을 안정적으로 가속화했으며, 최초 계통 연계부터 전 용량 계통 연계까지의 완벽한 마무리를 성공적으로 달성해 화넝의 속도, 화넝의 책임, 화넝의 품질을 충분히 입증했다
3시간 전