China's Copper Cathode & Secondary Copper Rods Both Weak: What's Happening in the Market?

게시됨: Oct 25, 2024 09:41
출처: SMM
The "September-October peak season," traditionally a peak season for copper rods, has shown weak consumption this year. The peak season is not as strong as expected, with new orders hard to sustain. This lack of significant consumption recovery is not only seen in the copper cathode rod industry but also in the secondary copper rod industry. Recently, the market has shown weakness in both copper cathode rods and secondary copper rods. What are the reasons behind this? Below is a detailed analysis of the recent market situation:

The "September-October peak season," traditionally a peak season for copper rods, has shown weak consumption this year. The peak season is not as strong as expected, with new orders hard to sustain. This lack of significant consumption recovery is not only seen in the copper cathode rod industry but also in the secondary copper rod industry. Recently, the market has shown weakness in both copper cathode rods and secondary copper rods. What are the reasons behind this? Below is a detailed analysis of the recent market situation:

From the above chart, it can be seen that although copper prices have declined since October, they are still significantly higher than the lows seen in early August and early September. The absolute prices remain beyond the acceptable range for downstream enterprises, and most downstream enterprises are still adopting a wait-and-see attitude. New orders for copper cathode rod makers are generally under pressure, and downstream consumption has not been significantly released since the holiday. As of now, the weekly operating rate of copper cathode rod production has not yet returned to the normal pre-holiday level and shows a downward trend (see the chart below).

Although copper prices remain high, the price difference between primary metal and scrap has not brought a price advantage to the secondary copper rod industry as expected. Since the National Day holiday, the price difference between primary metal and scrap reached a peak of 1,205 yuan/mt on October 8, but mostly stayed below 1,000 yuan/mt thereafter. There are two main reasons for this: first, copper prices have maintained a fluctuating trend at this level, and most copper scrap holders are holding back cargoes. At the same time, the policy for the recycling industry has not been fully implemented, leading to an unclear outlook, and the dismantling volume of copper scrap has also declined to some extent, dragging down supply. These two factors have caused the current secondary copper prices to remain high without following the market trend, making it difficult to procure materials, and secondary copper rod makers are struggling to maintain their operating rates. Additionally, according to some secondary copper rod makers, the current weak end-use demand combined with the small price difference between primary metal and scrap has resulted in sluggish consumption, making it difficult to raise secondary copper rod prices. Based on the current secondary copper prices and secondary copper rod quotations, the processing fee for the secondary copper rod industry is nearly zero.

In summary, the current overall copper rod market is not performing as expected during the peak season, with weak end-use demand and overall lower-than-expected results. According to the survey results, copper rod consumption has been consistently dragged down by the real estate sector this year. Additionally, since the beginning of the year, the operating rate of infrastructure projects has been suppressed after debt restructuring. As the year-end approaches and the northern market may be affected by weather and pollution during the autumn and winter, end-use operating rates will be further impacted, making it difficult to find support for consumption.

It is worth noting that the previous central meeting mentioned addressing existing projects within the year through ultra-long-term government bonds, which would drive actual workload. If existing projects receive support and real estate development resumes, sustainable consumption recovery may be seen within the year. SMM will continue to keep you updated on the latest market conditions.

If you have any questions, you can contact via email: zhangtongxu@smm.cn

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
13시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
13시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
13시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
13시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
15시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
15시간 전