SMM Morning Comment For SHFE Base Metals (Oct 10)

게시됨: Oct 10, 2024 09:44
출처: SMM
Overnight, LME copper opened at $9,720.5/mt, initially reached a high of $9,733/mt, and then declined to a low of $9,606.5/mt during the session. It fluctuated upward towards the end, closing at $9,684/mt, a decrease of 0.76%.

SHANGHAI, Oct 10 (SMM) –

Copper

US Dollar Index Rose to Two-Month High, Copper Prices Faced Pressure [SMM Copper Morning Comment]

Overnight, LME copper opened at $9,720.5/mt, initially reached a high of $9,733/mt, and then declined to a low of $9,606.5/mt during the session. It fluctuated upward towards the end, closing at $9,684/mt, a decrease of 0.76%. Trading volume reached 22,000 lots, and open interest was 297,000 lots. Overnight, the most-traded SHFE copper 2411 contract opened at 76,880 yuan/mt, initially dipping to 76,460 yuan/mt, then fluctuating upward to a high of 77,210 yuan/mt, finally closing at 77,000 yuan/mt, a decrease of 0.79%. Trading volume was 47,000 lots, and open interest was 160,000 lots. Macro side, the US Fed meeting minutes showed differences in the September interest rate cut, with some officials favoring a more gradual path to normal rates. Fed's Daly suggested there might be one or two more rate cuts this year. The US dollar index rose to a two-month high, putting pressure on copper prices. Fundamentally, although copper prices have clearly fallen, downstream purchasing sentiment remains lukewarm, mainly driven by just-in-time inventory replenishment. Post-holiday restocking demand has not yet significantly emerged. If copper prices continue to fall, consumption may pick up. Overall, with the high US dollar index and domestic consumption recovering slowly, copper prices face some upward pressure. If consumption recovers significantly in the near term, copper prices may stabilize.

Aluminum

Macro sentiment shifted, leading to a decline in overnight aluminum futures; but fundamentals are expected to provide good support [SMM Aluminum Morning Comment Oct 10]

SMM, Oct 10: The most-traded SHFE aluminum 2411 contract opened at 20,390 yuan/mt, reaching a high of 20,480 yuan/mt and a low of 20,300 yuan/mt, closing at 20,460 yuan/mt, down 105 yuan/mt, a decrease of 0.7%. Yesterday, LME aluminum opened at $2,571.5/mt, with a high of $2,579/mt and a low of $2,505/mt, closing at $2,545/mt, down $25/mt, a decrease of 0.97%.

Summary: On the macro front, the US Fed's September meeting minutes revealed significant internal disagreements on interest rates, causing a substantial shift in the overall macro environment, which drove the US dollar index to rebound sharply, suppressing the metals market. Domestically, the "systematic implementation of a package of incremental policies" meeting content was slightly below market expectations. Fundamentally, expectations for production cuts in Yunnan in Q4 have decreased, combined with the release of some new and resumed capacity, maintaining a growth trend in the domestic aluminum market supply side. Cost side, the tight balance in spot alumina persists, making domestic aluminum costs more likely to rise than fall. Demand side, October remains a small peak season for downstream aluminum processing, with industry operations largely stable, and future attention is needed on order conditions. Overall, with no prominent supply-demand mismatch in the aluminum market fundamentals, short-term fluctuations may follow macro sentiment. Future attention should focus on domestic consumption and changes in international macro sentiment.

Lead

Macro bullish factors are nearing their end, putting pressure on lead prices to fall back [SMM Lead Morning Comment]

Overnight, LME lead opened at $2,097.5/mt, consolidated around the daily moving average during the Asian session, briefly touched a high of $2,110/mt, and then fluctuated downward during the European session, hitting a low of $2,047.5/mt. Before the close, it slightly rebounded and finally ended at $2,076/mt, down $30/mt, a decrease of 1.42%.

Overnight, the most-traded SHFE lead 2411 contract opened at 16,665 yuan/mt, initially dipped to 16,515 yuan/mt, then slightly rose, briefly touching a high of 16,685 yuan/mt, and finally closed at 16,615 yuan/mt, down 235 yuan/mt, a decrease of 1.39%.

Macro side, the dollar continued to fluctuate upward, with strong market risk aversion sentiment. Traders are closely watching the Middle East conflict and China's stimulus measures for their impact on metal consumption. Fundamentals side, the "trade-in" policy for electric bicycles still requires ongoing attention for its effect on battery companies' orders. On the first day after the holiday, with a slightly bullish atmosphere, some purchasing demand was brought forward. After the lead price correction, downstream companies became cautious again, and transactions of primary and secondary refined lead decreased. As refined lead supply gradually recovers in October, smelters' post-holiday inventory reduction slowed, and holders continued to transfer lead ingots to delivery warehouses. Downstream buyers were cautious about price drops, showing low enthusiasm for purchasing, and lead prices may continue to fluctuate downward.

Zinc

US Dollar Strengthens, LME Zinc Under Pressure [SMM Zinc Morning Comment Oct 10]

Overnight, the US Fed meeting minutes showed a split on the rate cut path; Daly indicated there might be one or two more rate cuts this year; North Korea announced a permanent cut-off and blockade of the southern border with South Korea; US officials believe Israel accepts the argument of striking Iran's conventional military targets; OpenAI is expected not to achieve profitability before 2029; the Ministry of Finance will introduce measures to enhance counter-cyclical fiscal policy adjustment on October 12; China and the EU will continue consultations on the electric vehicles anti-subsidy case; Guotai Junan and Haitong Securities resume trading today.

Overnight, LME zinc opened at $3,082.5/mt, initially fluctuating along the daily moving average, briefly rising to a high of $3,109.5/mt during European trading hours. Subsequently, bulls reduced positions, and LME zinc fluctuated downward, hitting a low of $2,977.5/mt during the night session, finally closing down at $3,032.5/mt, a decrease of $44/mt, or 1.43%. Trading volume fell to 14,258 lots, and open interest decreased by 283 lots to 261,000 lots. Overnight, LME zinc recorded a large bearish candlestick, with LME inventory increasing by 1,625 mt to 244,025 mt, an increase of 0.67%. After the Fed meeting, expectations for a US rate cut in November weakened significantly, strengthening the dollar and putting pressure on base metals, with LME zinc shifting downward. Attention is on the US CPI data tonight.

Overnight, the most-traded SHFE zinc 2411 contract opened at 24,900 yuan/mt. Initially, bulls reduced positions, and SHFE zinc fluctuated downward to a low of 24,650 yuan/mt. Later, shorts reduced positions, and SHFE zinc fluctuated upward, reaching a high of 24,935 yuan/mt at the end of the session, finally closing down at 24,865 yuan/mt, a decrease of 175 yuan/mt, or 0.7%. Trading volume decreased to 90,166 lots, and open interest decreased by 2,478 lots to 114,000 lots. Overnight, SHFE zinc recorded a bearish candlestick, with the 5-day moving average forming resistance above. Macro sentiment weakened, the ferrous metals market returned to a downward trend, and with the weakening of Fed rate cut expectations, base metals broadly declined, with SHFE zinc shifting downward. SHFE zinc is expected to fluctuate today.

Tin

During the night session, SHFE tin prices fluctuated at low levels. Yesterday, the spot market was relatively active [SMM Tin Morning Comment Oct 10]

SMM, October 10: Yesterday, the most-traded SHFE tin contract closed at 264,520 yuan/mt, down 1,060 yuan/mt, a decrease of 0.40%, with a high of 264,900 yuan/mt and a low of 262,230 yuan/mt. During the morning session, trading companies quoted domestic tin ingot brands with little change in premiums compared to recent days. Small brand tin ingots were quoted at premiums of 0-500 yuan/mt against the SHFE 2411 contract, delivery brand prices at premiums of 200-700 yuan/mt against the SHFE 2411 contract, Yunnan Tin brand at premiums of 600-900 yuan/mt against the SHFE 2411 contract, and imported tin brand spot prices at -400 to -200 yuan/mt against the SHFE 2411 contract. Tin prices fluctuated rangebound during the morning session, with some companies restocking as needed. Some trading companies completed transactions of about one truckload, while a few completed two truckloads. Overall, the spot market was relatively active yesterday.

Nickel

On October 9, Jinchuan nickel was quoted at a premium of 1,300-1,500 yuan/mt, with an average of 1,400 yuan/mt, unchanged from the previous trading day. Norilsk nickel was quoted at a discount of 400-200 yuan/mt, with an average of 300 yuan/mt, up 50 yuan/mt from the previous trading day. On the morning of October 9, futures prices fell, and the spot premium spread remained stable overall. Nickel briquette prices were 134,200-134,600 yuan/mt, down 350 yuan/mt from the previous trading day. The price spread between nickel briquette and nickel sulphate was approximately 6,786 yuan/mt (nickel sulphate prices were 6,786 yuan/mt lower than nickel briquette prices).

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
12시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
14시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
14시간 전