Review of PV-grade EVA market situation in June

게시됨: Jul 16, 2024 09:48
출처: SMM
In June, the overall price of PV-grade EVA resin showed a downward trend, with transactions at the beginning of the month being significantly better than those at the end.

In June, the overall price of PV-grade EVA resin showed a downward trend, with transactions at the beginning of the month being significantly better than those at the end. This reflected the film producers' expectation for low-price purchases, but later in the month, they anticipated further price reductions, leading to concentrated purchasing activity in early June, while actual transactions in the latter part of the month were sluggish, even extending into early July. Throughout June, the market sentiment was sluggish. Film manufacturers, leveraging their relatively high inventory and the pressure of negotiating orders from module manufacturers, engaged in price negotiations with petrochemical producers. The petrochemical producers were forced to make concessions, gradually lowering the actual transaction price to around 10,000 yuan/mt. This trend continued until the end of June. As of July 12, the actual average transaction price had dropped to around 9,500 yuan/mt. Despite current inventory levels approaching a low point, this has not prevented petrochemical producers from needing to continue making concessions.

In July, petrochemical producers continued their strategy of switching production, adjusting their scheduled production plans to manufacture EVA 2806, EVA 1803, and other materials, thereby reducing the scheduled production of PV-grade EVA resin. Based on the companies' expectations at the beginning of the month, the scheduled production and orders in July might not be as strong as in June. If we assume that July continues to perform as it did in June, with a consumption of 125,000 mt of PV-grade EVA resin, the optimistic scenario would see a scheduled production of 80,000 mt of PV-grade EVA resin, while the pessimistic scenario would see a scheduled production of 60,000 mt. In the optimistic scenario, the sales of PV-grade EVA resin are expected to reach 130,000 mt, while in the pessimistic scenario, the sales are expected to be 110,000 mt.

Therefore, it can be roughly inferred that, in a pessimistic scenario, the minimum inventory of petrochemical producers will be reduced to 67,000 mt; in an optimistic scenario, the minimum inventory will be reduced to 27,000 mt, which is equivalent to 7-16 days of supply. At that time, their inventory will most likely be less than half a month, and most petrochemical producers (including leading companies) may achieve "zero inventory." Affected by the significant reduction in supply, petrochemical producers will regain control over pricing. Under cost-saving measures, they will control the price trend of EVA resin, a halt in the price decline will also occur, and cable-grade EVA and foaming-grade EVA will also experience a slight rebound.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
2시간 전
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
더 보기
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
2시간 전
[SMM PV 플래시]
4시간 전
[SMM PV 플래시]
더 보기
[SMM PV 플래시]
[SMM PV 플래시]
한 선도 석유화학 공장이 어제 한 생산 재개 라인을 중단했고, 오늘 다른 라인에서 LDPE 생산을 시작했다. 단기적으로 이 기업의 생산 일정은 고압 소재 라인 1개와 PV 소재 라인 1개의 병행 생산을 유지할 것이다. 이번 라인 조정 이후 해당 공장의 PV 소재 생산 규모는 다소 축소되었다.
4시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
4시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
더 보기
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
2026년 8월 31일, 화넝 산시 션무 10만 kW 태양광(PV) 발전 프로젝트가 전 용량 계통 연계를 달성했으며, 이는 화넝 산시 신에너지 지사의 누적 설비용량이 300만 kW를 넘어섰음을 의미한다. 션무 프로젝트 착수 이후, 산시 북부의 잦은 강풍·모래먼지 날씨, 복잡한 지형·지세, 제한된 시공 여건, 촉박한 공기 등 여러 도전에 직면한 가운데 모든 건설 인력이 힘을 모아 난관을 극복하고 우수성을 추구했다. 안전생산과 품질관리 요구사항을 엄격히 이행하고, 시공 계획을 과학적으로 조율했으며, 시공 공정 흐름을 최적화해 승압변전소 건설, 태양광 패널 지지대 설치, 모듈 포설, 집전선로 설치, 설비 디버깅 및 교정 등 핵심 업무를 질서 있게 추진했다. 정밀 관리, 표준화 시공, 상시적 문제 해결을 통해 시공 과정의 각종 어려움과 병목을 효율적으로 해소하고 공정 추진을 안정적으로 가속화했으며, 최초 계통 연계부터 전 용량 계통 연계까지의 완벽한 마무리를 성공적으로 달성해 화넝의 속도, 화넝의 책임, 화넝의 품질을 충분히 입증했다
4시간 전