SMM Morning Comment For SHFE Base Metals On June 12

게시됨: Jun 12, 2024 10:06
출처: SMM
Overnight, LME copper opened at $9,693.5/mt, initially dropped to $9,680/mt, then fluctuated upwards, hitting a high of $9,816.5/mt during the session, and finally fluctuated widely to close at $9,805/mt, with a drop of 0.77%.

SHANGHAI, June 12 (SMM) –

Copper

Overnight, LME copper opened at $9,693.5/mt, initially dropped to $9,680/mt, then fluctuated upwards, hitting a high of $9,816.5/mt during the session, and finally fluctuated widely to close at $9,805/mt, with a drop of 0.77%. Trading volume rose to 25,000 lots, and open interest stood at 332,000 lots. Overnight, the most-traded SHFE copper contract (2407) opened at 79,390 yuan/mt, initially hit a high of 79,700 yuan/mt, then fluctuated downwards to a low of 79,130 yuan/mt, hovered sideways during the session, and rebounded at the end to close at 79,530 yuan/mt, with a drop of 0.7%. Trading volume rose to 44,000 lots, and open interest stood at 172,000 lots. On the macro front, the World Bank revised the global GDP growth forecast for 2024 from 2.4% to 2.6% and the US GDP growth forecast from 1.6% to 2.5%. The strengthening US dollar inhibited copper prices. Additionally, the market is paying attention to the US CPI data to be released tonight and the interest rate decision early Thursday morning. In terms of fundamentals, copper prices fell, leading to a rebound in purchasing volumes from downstream processing enterprises, but some remain in a wait-and-see sentiment, resulting in relatively limited overall demand recovery. The market is watching whether copper prices will continue to decline in the future. SMM learned that as of Tuesday, June 11, copper stocks in mainstream areas of China fell by 8,600 mt MoM to 442,100 mt, still 98,400 mt higher YoY, mainly due to an increase in cargo pick-up by downstream enterprises. The prices are expected to run at a relatively low level.

Aluminum

The most-traded SHFE 2407 aluminum contract opened at 20,820 yuan/mt, reaching a high of 20,900 yuan/mt and a low of 20,730 yuan/mt, and closed at 20,800 yuan/mt, down 105 yuan/mt, a drop of 0.5%. The previous trading day, LME aluminum opened at $2,575.5/mt, reached a high of $2,589/mt, a low of $2,529/mt, and closed at $2,544/mt, down $38/mt, a drop of 1.47%.

Summary: On the macro level, the postponement of US Fed interest rate cut expectations resulted in a short-term pullback in aluminum prices, but interest rate cuts by the European Central Bank and others provided support for commodities. On the fundamentals, the domestic aluminum market supply and demand relationship is gradually weakening, with both aluminum ingot and aluminum billet social inventory increasing. In the short term, aluminum prices are under pressure, and are expected to hover around at a high level.

Lead

Overnight, LME lead opened at $2,212.5/mt. Under the dual pressure of the strength of the US dollar and the gradual accumulation of lead inventory, LME lead continued its downward trend throughout the day. During the Asian session, influenced by the resilience of SHFE lead, LME lead managed to stay above $2,200/mt. However, entering the European session, the inventory pressure increased, leading to a sharp decline in LME lead, reaching a lowest point of $2,154/mt, a one-and-a-half-month low. LME lead eventually closed at $2,169.5/mt, a drop of 1.79%.

Overnight, the most-traded SHFE lead contract (2408 contract) opened at ¥18,630/mt. Close to the delivery date, the SHFE lead warrants increased, and with the lead ingot import window about to open, potentially altering the domestic supply tightness. SHFE lead fluctuated downward, reaching a lowest point of ¥18,505/mt, a half-month low. SHFE lead eventually closed at ¥18,575/mt, a drop of 0.93%; open interest stood at 80,642 lots, an increase of 6,076 lots from the previous trading day.

Zinc

Overnight, LME zinc opened at $2,845/mt, hitting a high of $2,863/mt during the session. Entering the European trading session, the exit of capital led to a quick drop in LME zinc, shifting lower to fluctuate around $2,790/mt, and hit a low of $2,767/mt during the night session, finally closing at $2,786/mt, down $64.5/mt, with a drop of 2.26%. Trading volume increased to 15,831 lots, and open interest decreased by 2,518 lots to 235,000 lots. LME zinc inventory fell by 600 mt to 259,350 mt, a drop of 0.34%. The continued strengthening of the US dollar inhibited the performance of non-ferrous metals, which generally declined, together with weak domestic demand, LME zinc is expected to perform relatively poorly.

Overnight, the most-traded SHFE zinc contract (2408) opened at 23,455 yuan/mt, briefly hit a high, then with the increase in positions by shorts, SHFE zinc fluctuated downwards, shifting lower to fluctuate around 23,470 yuan/mt, finally closing at 23,445 yuan/mt, down 245 yuan/mt, with a drop of 1.03%. Trading volume increased to 51,376 lots, and open interest increased by 1,815 lots to 77,943 lots. With a bearish macro sentiment, the continued strengthening of the US dollar, and lower-than-expected domestic and overseas PMI data, coupled with no improvement in domestic demand, SHFE zinc is expected to perform relatively poorly.

Tin

Overnight, the most-traded SHFE tin contract closed at 264,950 yuan/mt, falling 20 yuan/mt or 0.01%. The highest was 265,200 yuan/mt, and the lowest was 263,040 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-100 yuan/mt over SHFE 2407 tin contract, versus discounts of 300 yuan/mt to premiums of 500 yuan/mt for delivery brands, and premiums of 300-800 yuan/mt for Yunxi brand. Tin prices swung on a soft note. Downstream companies, mostly having stocked up enough raw materials earlier, barely showed any purchasing interest. Yesterday, SHFE tin warrants decreased by 114 mt to 15,540 mt, while LME tin inventory increased by 25 mt to 4,820 mt.

Nickel

On June 11, Jinchuan nickel was at a premium of 2,400-2,800 yuan/mt, with an average of 2,600 yuan/mt, up 450 yuan/mt compared to the previous trading day. Russian nickel was at a discount of 0-330 yuan/mt, with an average of 150 yuan/mt, up 100 yuan/mt compared to the previous trading day. In the morning, the market continued to decline. The downward movement in raw material prices resulted in downstream demand, with the spot market trades warming up. The shortage of electro-deposited nickel in the spot market continued, and spot premiums and discounts of various brands surged. Nickel briquette prices were 136,100-136,900 yuan/mt, down 3,000 yuan/mt compared to the previous trading day. The price spread between nickel briquette and nickel sulphate was about 11,909 yuan/mt (nickel sulphate prices were higher than nickel briquette prices by 11,909 yuan/mt).

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
12시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
14시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
14시간 전