SMM copper price review and forecast

게시됨: Jun 3, 2024 17:13
At the beginning of last week, new policies were introduced in China’s real estate sector, and favorable policies for the housing market pushed up SHFE base metals prices, with the most-traded SHFE copper contract touching a high of 85,880 yuan/mt. On Thursday, SHFE base metals prices declined.

At the beginning of last week, new policies were introduced in China’s real estate sector, and favorable policies for the housing market pushed up SHFE base metals prices, with the most-traded SHFE copper contract touching a high of 85,880 yuan/mt. On Thursday, SHFE base metals prices declined. The short squeeze in COMEX copper dissipated as LME copper inventories continued to increase, narrowing the price spread between the COMEX most-traded copper contract and the LME 3-month copper contract. Negative feedback from the demand side became prominent, with LME copper price falling all the way to around $10,000/mt, and the most-traded SHFE copper contract falling below 83,000 yuan/mt. The US Fed released the Beige Book on economic conditions, predicting moderate goods price increases. Fed officials remained cautious about future rate cuts, and US Treasury yields rebounded. However, due to the continued slowdown in inflation, the market still expects one rate cut within the year.

In the eurozone market, the April unemployment rate fell more than expected, boosting market confidence. The ECB is likely to cut rates this week, and the euro's rise against the dollar pushed the US dollar index higher, putting further pressure on copper prices. In the Chinese market, the State Council issued new policies to strictly control new smelting capacities for copper and alumina, but the market had already priced in this, providing limited support for copper prices.

On the fundamentals side, the downward trend in copper concentrate TCs temporarily slowed. Domestic smelters, which had been active in exports previously, gradually delivered cargoes to warehouses. Inventories in LME Asian warehouses accumulated over 8,000 mt during the week, and the SHFE/LME copper price ratio showed signs of recovery, with trade in the imported copper market picking up. Spot premiums in Shanghai first declined and then rose during the week. At the beginning of the week, with high copper prices, domestic inventories continued to accumulate by 19,000 mt. After the mid-week price decline, downstream orders significantly improved. Due to a bearish sentiment, sellers were holding back goods and raising prices, with spot discounts returning to below 200 yuan/mt.

This week, several countries will release the final PMI for May. Before the ECB rate cut decision and the release of US unemployment and non-farm payrolls data, the market is expected to remain cautious. However, the current resilience of inflation will keep the US dollar index running high. Under bearish sentiment, copper prices may fall, with LME copper expected to trade between $10,000-10,300/mt and SHFE copper between 80,500-83,500 yuan/mt. In the spot market, as copper prices fall, the contango of the SHFE front-month contract against the next-month contract will narrow. With increased downstream purchasing sentiment, sellers may raise their offers. Spot discounts against the SHFE 2406 contract are expected to be between 200-50 yuan/mt.

The SMM copper price forecasting model predicts the price range for the most-traded copper contract's closing price to be [83,925, 90,555], with an average of 86,660 yuan/mt. The unit is yuan/mt. The extreme price range is [81,920, 92,310], the normal price range is [83,260, 91,140], and the conservative price range is [84,590, 89,970]. Price is expected to be sideways or consolidate weakly. The support range is [83,260, 84,590], and the resistance range is [89,970, 91,140].

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
12시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
14시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
14시간 전