The PMI of the domestic aluminum processing industry recorded 41.7% in May

게시됨: Jun 3, 2024 16:26
출처: SMM
The comprehensive PMI index for the domestic aluminum processing industry in May 2024 recorded 41.7%, remaining in the contraction territory.

The comprehensive PMI index for the domestic aluminum processing industry in May 2024 recorded 41.7%, remaining in the contraction territory. The inhibitory effect of high aluminum prices on downstream demand has become apparent, with the production index recording 43.3% and the new orders index recording 28%. Recent increases in overseas trade barriers affected some companies' new export orders, with the new export orders index recording 40.5%. Meanwhile, under high aluminum prices, the end-users' order pick-up speed slightly slowed down, with the product inventory index recording 54.5%. In May, except for the PMI index of the aluminum wire and cable sector being above 50%, other sectors were all in contraction territory.

In May, aluminum prices continued to fluctuate at high levels. The willingness to place orders in downstream end-user sectors was poor, and some aluminum processing enterprises experienced losses on previous orders. This led to a decline in production enthusiasm, resulting in a less-than-expected peak season. The NEVs and photovoltaic industries continued to reduce costs and increase efficiency, with low willingness to accept high aluminum semis prices. The industry saw a trend of replacing aluminum with steel and magnesium, affecting orders in aluminum processing industry. The PMI of aluminum processing enterprises fell below 50% in May. In June, the sentiment in end-user sectors remained cautious, with limited order growth. By late June, the aluminum processing industry will begin transitioning into the off-season, and overseas trade barriers caused further disruptions. As a result, the increase in aluminum semis export orders was limited. Based on the industry orders and production schedules, SMM expects the PMI to remain below 50% in June.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
6시간 전
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
더 보기
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
SMM 추적 피드백: 인도네시아 플로레스섬에서 발생한 규모 7.7 지진은 알루미늄 산업 밸류체인에 미친 영향이 비교적 제한적이었다. 설비 분포 측면에서 보크사이트, 알루미나 및 알루미늄 설비의 대부분은 인도네시아 서부에 집중되어 있으며, 진앙에서 대체로 1,400km 이상 떨어져 있다. 가장 가까운 알루미늄 제련소인 술라웨시 모로왈리 화친 알루미늄도 약 624km 떨어져 있어 300km 피해 반경 밖에 있었다. 여기에 쓰나미 파고가 0.4m 미만이었던 점을 감안하면, 실제 공급 충격은 사실상 제로에 가까웠다. 가격 측면에서는 단기적으로 0~1% 수준의 심리적 변동만 나타날 수 있으며, 1~3일 내 해소될 것으로 예상되어 중기 추세를 바꾸지는 않을 전망이다
6시간 전
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
18시간 전
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
더 보기
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
12일 필리핀 언론 보도에 따르면, 필리핀 통상산업부(DTI)는 알루미늄 제품에 대한 필수 인증제 도입을 추진할 계획이었다. 이 제도는 필리핀 내 현지 및 외국 제조업체가 필리핀 공식 품질·안전 허가를 사전에 취득하도록 요구하며, ‘공장 1곳당 인증서 1개’ 방식의 인증을 채택한다.
18시간 전
장쑤딩천, 3만 톤 에나멜선 프로젝트 착공
18시간 전
장쑤딩천, 3만 톤 에나멜선 프로젝트 착공
더 보기
장쑤딩천, 3만 톤 에나멜선 프로젝트 착공
장쑤딩천, 3만 톤 에나멜선 프로젝트 착공
8월 8일, 장쑤딩천의 연산 3만 톤 규모 에나멜 동선·알루미늄선 프로젝트가 착공에 들어갔다. 이 프로젝트는 6,000㎡ 이상의 R&D 사무동과 8,000㎡ 이상의 생산 공장 및 부속 건물을 건설하고, 에나멜 환선·평각선용 지능형 생산라인을 여러 개 추가할 예정이다.
18시간 전