SMM Morning Comment For SHFE Base Metals On Apr 25

게시됨: Apr 25, 2024 10:05
출처: SMM
LME copper prices opened at $9794.5/mt and closed 0.64% higher at $9790/mt overnight, with the low-end of $9758.5/mt and the high-end of $9843/mt.

SHANGHAI, Apr 25 (SMM) –

Copper

LME copper prices opened at $9794.5/mt and closed 0.64% higher at $9790/mt overnight, with the low-end of $9758.5/mt and the high-end of $9843/mt. Trading volume was 23,000 lots, and open interest stood at 335,000 lots. The most active SHFE 2102 contract prices opened at 79250 yuan/mt and closed at 79230 yuan/mt last evening, up 0.74%, with the high-end of 79690 yuan/mt and the low-end of 78930 yuan/mt. Trading volumes stood at 64,000 lots and open interest stood at 198,000 lots. Concerns about mine supply continue to provide support for copper prices. In addition, Ukrainian drones hit two Russian oil reserves, Israel said it was ready to launch Operation Rafah immediately and had already struck Hezbollah in southern Lebanon. Geopolitical conflicts also pushed up copper prices to a certain extent. The supply remains sufficient. In terms of consumption, the rebound in copper prices has caused spot trading to remain sluggish, and it is difficult to see any increase in downstream replenishment. If copper prices remain stable, consumption may improve. On the whole, the capital level remains strong, and copper prices are expected to rise in the near future. At the same time, Blinken has arrived in Shanghai, and we need to pay attention to the progress of the meeting between the two sides.

Aluminum

Overnight, the most-traded SHFE 2406 aluminum contract opened at 20,280 yuan/mt, with its lowest and highest at 20,230 yuan/mt and 20,335 yuan/mt before closing at 20,280 yuan/mt, up 130 yuan/mt or 0.65 %. LME aluminum opened at $2,580/mt in the previous trading day, with its high and low at $2,614.5/mt and $2,563/mt respectively before closing at $2,584/mt, up $8/mt or 0.31%.

On the macro front, the market is waiting for the US Personal Consumption Expenditure (PCE) price index report to be released on Friday for clues on the prospects for US interest rate cuts. Risky assets and non-US monetary experienced an increase in volatility. The UK and the US imposed sanctions on Russian metals again, and Biden called for a 25% tariff on China’s aluminum semis, triggering turbulence in global metals market. The domestic aluminum supply rose further, but downstream demand dragged down inventories, supporting aluminum prices. The domestic market prices may fluctuate at a high level amid global aluminum trade friction.

Lead

Last evening, LME lead price opened at US$2182.5/ton and hit a high of US$2209/ton, and finally closed at US$2202.5/ton, an increase of 0.85%.

The most traded SHFE 2406 lead contract opened at 17095 yuan/mt and rose 0.50% to close at 17090 yuan/mt after briefly hitting a high point at 17145 yuan/mt and the lowest point at 17035 yuan/mt.

Zinc

Overnight, LME zinc opened at $2795/mt, hitting a low and high of $2783/mt and $2838/mt respectively, and closed higher at $2794.5/mt. Trading volume decreased to 8967 lots, and open interest decreased 285 lots to 244,000 lots. LME zinc inventory dropped by 750 mt or 0.29% to 255100 mt. The 2.6% month-on-month growth in U.S. durable goods orders in March was basically in line with expectations. The rise in the U.S. dollar index again suppressed zinc prices. We will pay attention to the U.S. economic data to be released later this week.

The most active SHFE 2406 zinc contract prices opened at 22565 yuan/mt and gained 25 yuan/mt or 0.11% at 22490 yuan/mt, with the high-end of 22640 yuan/mt and the low-end of 22445 yuan/mt. Trading volumes decreased to 81995 lots and then interest grew 50 lots to 109,000 lots. Demand remains weak. It is expected that the subsequent upward space for SHFE zinc may be limited.

Tin

SHFE 2405 tin contract rebounded slightly after opening lower, closing at 254,570 yuan/mt, up 0.53%.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 600-1,400 yuan/mt for SHFE 2405 tin contract, versus discounts of 0-1,000 yuan/mt for delivery brands and premiums of 200-400 yuan/mt for Yunxi brand. In yesterday's early trading, SHFE 2405 tin contract remained stable. After a short period of wait-and-see, downstream companies purchased only as needed and stocked up in small quantities.

Nickel

On April 24, the most-traded SHFE nickel contract opened at 139,970 yuan/mt, and closed at 142,990 yuan/mt, up 2,020 yuan/mt compared with the last trading day. Trading volume fell by 165,098 lots to 307,135 lots, and open interest decreased by 3,882 lots to 100,172 lots. The most-traded SHFE nickel contract fluctuated upward after opening and then fell slightly, with the highest at 143,360 yuan/mt and the final decrease of 0.68%.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
10시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
10시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
10시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
10시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
12시간 전
SMM Morning Comment For SHFE Base Metals On Apr 25 - Shanghai Metals Market (SMM)