China's copper cathode output in March

게시됨: Apr 10, 2024 15:16
In March, SMM data showed that China's copper cathode output was 999,500 mt, an increase of 49,200 mt or 5.18% from the previous month, a year-on-year increase of 5.06%, and an increase of 29,300 mt from the expected 970,200 mt. The total output from January to March was 2.9196 million mt, an increase of 207,100 mt or 7.64% year-on-year.

In March, SMM data showed that China's copper cathode output was 999,500 mt, an increase of 49,200 mt or 5.18% from the previous month, a year-on-year increase of 5.06%, and an increase of 29,300 mt from the expected 970,200 mt. The total output from January to March was 2.9196 million mt, an increase of 207,100 mt or 7.64% year-on-year.

There are several reasons for the sharp growth in output in March: 1. In March, many smelters increased production for a good start, and the number of production days also increased compared with February; 2. The two smelters that were put into operation at the end of last year continued to release output; 3. The copper concentrate TCs continued to decline (as of March 29, the SMM imported copper concentrate index (weekly) was reported at $6.38/mt, a decrease of $4.25/mt from the previous figure, continuing to set a new low in recent years. If the smelters purchase spot copper concentrate for production, the current losses expand to 1,745 yuan/mt. If the smelters use copper concentrate purchased under long-term contracts for production, they are currently making a profit of 1,299 yuan/mt, an increase of 381 yuan/mt from the previous month. The reason for the increase in profits is the recent increase in domestic sulphuric acid prices). Nonetheless, the rising prices of by-products such as sulphuric acid, gold and silver have reduced the losses to a certain extent. 4. The sharp rise in copper prices in March widened the price spread between copper cathode and copper scrap, and the supply of blister copper and copper anode increased (as of April 3, the SMM domestic blister copper RC was reported at 1,050 yuan/mt, up 200 yuan/mt from the previous month). Smelters could purchase more raw materials and avoid reducing production due to tight copper concentrate supply. We believe that the average operating rate of copper cathode industry rose 4.2 percentage points month on month to 88% in March.

In April, smelters will undertake intensive maintenance. According to our current survey, seven smelters will undertake maintenance in April, involving 1.21 million mt of smelting capacity. This will be the main reason for the decline in production in April. The current supply of blister copper and anode plates increased, but can hardly completely make up for the supply gap. SMM understood that there are still four smelters that have significantly reduced production due to the tight supply of copper concentrate.

Based on the production schedules of various companies, SMM estimates that domestic copper cathode output in April will be 965,000 mt, a month-on-month decrease of 34,500 mt or 3.45%, and a year-on-year decrease of 5,000 mt or 0.52%. The total output from January to April is expected to be 3.8846 million mt, a year-on-year increase of 5.49% or 202,100 mt. A large number of smelters will undergo maintenance in May and June, and domestic copper production is expected to decline in the next two months.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
10시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
10시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
10시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
10시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
12시간 전