SMM Morning Comment For SHFE Base Metals October 17

게시됨: Oct 17, 2023 09:53
출처: SMM
LME copper prices opened at $7983/mt and closed flat at $7984.5/mt in overnight trading, with the low-end of $7953/mt and the high-end of $8015/mt.

SHANGHAI, October 17(SMM) –
Copper
SMM copper morning comments
Data source: SMM
LME copper prices opened at $7983/mt and closed flat at $7984.5/mt in overnight trading, with the low-end of $7953/mt and the high-end of $8015/mt. Trading volume was 16,000 lots, and open interest stood at 275,000 lots. The most active SHFE 2311 copper contract prices opened at 66560 yuan/mt and finished at 66310 yuan/mt last evening, up 0%, with the low-end of 66200 yuan/mt and the high-end of 66560 yuan/mt. Trading volume was 20,000 lots, and open interest stood at 158,000 lots. On the macro front, Philadelphia Fed President Harker reiterated his remarks last Friday: Unless there is a turning point in the data, the Fed should keep interest rates stable. The US dollar index fell on Fed dovish tone. On the fundamentals, as of October 16, SMM copper inventory across major Chinese markets decreased by 3,200 mt from last Friday to 114,100 mt. There were not many imported copper arrivals in East China and there were many direct shipments to downstream customers. The arrivals of domestic copper were also relatively limited. In South China, due to the high enthusiasm of downstream replenishment, inventory dropped significantly. Given low copper prices, demand remained acceptable. Copper prices are expected to remain rangebound as the market is cautious.
Aluminum

Overall, external macro news disturbed market. The swinging expectations of short-term interest rate hikes and the intensification of the Palestinian-Israeli conflict added uncertainty to market. Domestic favorable policies continue to be issued, promoting economic recovery. Although social inventories gradually accumulated after the holiday, the total inventory was still at a historical low for the same period, which had not brought much negative effects on aluminum prices. In the medium to long term, aluminum supply and demand may maintain a tight balance, and aluminum prices are expected to fluctuate at high levels, with limited downside space.
Lead
SMM Lead Morning Comments
Overnight, LME lead opened at US$2,049.5/ton. During the Asian session, LME lead trading was flat, basically fluctuating between US$2,045 and US$2,055/ton. Entering the European session, concerns about conflicts in the Middle East escalated, and LME lead inventories increased to over 90,000 tons. LME lead plummeted to as low as US$2029/ton, setting a new low in nearly 4 months. Then the U.S. dollar reversed course and fell, basic metals generally rebounded, and LME lead finally closed at $2,077.5/ton, an increase of 1.29%.
The most active SHFE 2311 lead contract prices opened at 16135 yuan/mt last evening and finally closed at 16185 yuan/mt, up 0.15%. Open interest decreased 2577 lots to 79297 lots.
Zinc
SMM Zinc Morning Comment
Overnight, LME zinc opened at $2457/mt, hitting a high of $2471/mt and a low of $2435/mt respectively, and closed at $2445.5/mt, down $1.5/mt or 0.06%. Trading volume decreased to 5731 lots, and open interest fell 2412 lots to 218,000 lots. LME zinc inventories decreased by 3325 mt to 83450 mt, a drop of 3.83%.
The most active SHFE 2311 prices opened at 21295 yuan/mt and lost 10 yuan/mt or 0.05% to settle at 21195 yuan/mt in overnight trading with the high-end of 21355 yuan/mt and the low-end of 21170 yuan/mt. Trading volumes decreased to 42283 lots and open interest fell 1345 lots to 90120 lots. According to the SMM survey, smelters basically maintained high output in October, while social inventories were slightly reduced yesterday.
Tin

SHFE 2311 tin contract surged rapidly after the opening of yesterday night session. After reaching a relatively high of 218,500 yuan/mt, it maintained sideways and finally closed at 218,250 yuan/mt, up 0.56%.
Spot premiums and discounts were basically unchanged from yesterday. Small brand tin ingots were offered at premiums of 0-400 yuan/mt, premiums of 400-700 yuan/mt for delivery brands, premiums of 900-1,200 yuan/mt for Yunxi brands, and discounts of 300-400 yuan/mt for imported tin brands. Yesterday, tin price rose again, and there is almost no purchase willingness of downstream. Most trading companies reported that most of the shipments were zero or less. The transactions in spot market was sluggish.
Nickel

Overnight, the most-traded SHFE nickel contract opened at 151,820 yuan/mt, and closed at 152,380 yuan/mt, up 1,160 yuan/mt. Trading volume rose by 34,398 lots, and open interest decreased by 338 lots.
On the macro front, CME Group’s Fed Watch Tool showed that the market expected the probability of the Federal Reserve maintaining current interest rates in November to be 85.7%, but current US inflation had not yet reached the ideal level. In the fundamentals, the demand for domestic electrowinning nickel remained stable and the purchase amount of Jinchuan nickel plate was acceptable. Norilsk nickel transactions in spot market were sluggish and demand dropped. In summary, it is expected that nickel prices will continue to rebound slightly in the future.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
10시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
10시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
10시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
10시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
12시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
12시간 전