China's aluminium production soars in July with optimistic outlook for August

게시됨: Aug 15, 2023 17:00
China's domestic aluminium production for July 2023 surged to a staggering 3.568 million tonnes, registering an impressive 1.95 per cent year-on-year growth.

China's domestic aluminium production for July 2023 surged to a staggering 3.568 million tonnes, registering an impressive 1.95 per cent year-on-year growth. This monumental achievement was underscored by the sector's average daily output, which escalated by over 3,000 tonnes month-on-month to a robust 115,100 tonnes. Notably, the year-to-date figures tell a compelling story of steady expansion, with total domestic aluminium production reaching 23.676 million tonnes, marking a 2.7 per cent year-on-year cumulative increase.
July witnessed a minor ebb and flow in the molten aluminium ratio, a metric underlining industry health. Bolstered by increased downstream capacity, certain entities observed a shift from ingots to molten aluminium, propelling the ratio upwards by 0.6 percentage points to reach 72.6 per cent.
Delving into capacity dynamics, the landscape displayed a dual nature. July's production uptick was spurred by a notable upswing in operational capacity, led by the remarkable resurgence in Yunnan. The province's resumed production, amassing 1.22 million tonnes, fused with figures from June to culminate in an impressive 1.48 million tonnes.
However, certain setbacks were observed, with production halts in Shandong and maintenance work in Sichuan contributing to an overall decrease of 230,000 tonnes. China's aluminium capacity matrix painted a robust picture, boasting an installed capacity of approximately 45.19 million tonnes and an operational peak of 42.16 million tonnes, a historic high.
Turning to the crystal ball, August promises a vibrant continuation. Yunnan's aluminium giants are primed for further resurgence, with nearly 620,000 tonnes of capacity poised to resume production. The province is set to usher in 490,000 tonnes by the month's end, alongside an influx of relocated production. Coupled with capacity shifts in other regions, China's operational aluminium capacity is projected to hover around 42.7 million tonnes by August's close.
Anticipation mounts as the nation braces for a productive August. Forecasts paint a vivid picture of the sector's continued ascent, with the expected domestic aluminium production touching 3.60 million tonnes, showcasing a remarkable 3.5 per cent year-on-year increase. Keeping a vigilant eye on southwestern power dynamics and industry operations shall remain paramount as the narrative of China's aluminium prowess unfolds.

Source: https://www.alcircle.com/news/china-s-aluminium-production-soars-in-july-with-optimistic-outlook-for-august-98874

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
중국 알루미늄 빌릿 공급: 7월 관성에 따른 상승세가 이어졌으며, 8월에는 고점에서 후퇴할 것으로 예상됨
48분 전
중국 알루미늄 빌릿 공급: 7월 관성에 따른 상승세가 이어졌으며, 8월에는 고점에서 후퇴할 것으로 예상됨
더 보기
중국 알루미늄 빌릿 공급: 7월 관성에 따른 상승세가 이어졌으며, 8월에는 고점에서 후퇴할 것으로 예상됨
중국 알루미늄 빌릿 공급: 7월 관성에 따른 상승세가 이어졌으며, 8월에는 고점에서 후퇴할 것으로 예상됨
SMM 알루미늄 빌릿 시장: 7월 알루미늄 빌릿 가동률은 전월 대비 1.1%p 상승한 58.3%를 기록했으며, 전년 동기 대비로는 5.2%p 급등했다. 2분기 알루미늄 빌릿 가공비의 강세에 힘입어…
48분 전
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
9시간 전
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
더 보기
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
인도네시아 규모 7.7 지진은 알루미늄 산업 공급망에 미친 영향이 비교적 작았으며, 충격은 거의 제로에 가까웠다
SMM 추적 피드백: 인도네시아 플로레스섬에서 발생한 규모 7.7 지진은 알루미늄 산업 밸류체인에 미친 영향이 비교적 제한적이었다. 설비 분포 측면에서 보크사이트, 알루미나 및 알루미늄 설비의 대부분은 인도네시아 서부에 집중되어 있으며, 진앙에서 대체로 1,400km 이상 떨어져 있다. 가장 가까운 알루미늄 제련소인 술라웨시 모로왈리 화친 알루미늄도 약 624km 떨어져 있어 300km 피해 반경 밖에 있었다. 여기에 쓰나미 파고가 0.4m 미만이었던 점을 감안하면, 실제 공급 충격은 사실상 제로에 가까웠다. 가격 측면에서는 단기적으로 0~1% 수준의 심리적 변동만 나타날 수 있으며, 1~3일 내 해소될 것으로 예상되어 중기 추세를 바꾸지는 않을 전망이다
9시간 전
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
21시간 전
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
더 보기
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
필리핀 DTI, 알루미늄 제품 의무 인증 추진… 품질·안전 기준 확보
12일 필리핀 언론 보도에 따르면, 필리핀 통상산업부(DTI)는 알루미늄 제품에 대한 필수 인증제 도입을 추진할 계획이었다. 이 제도는 필리핀 내 현지 및 외국 제조업체가 필리핀 공식 품질·안전 허가를 사전에 취득하도록 요구하며, ‘공장 1곳당 인증서 1개’ 방식의 인증을 채택한다.
21시간 전
China's aluminium production soars in July with optimistic outlook for August - Shanghai Metals Market (SMM)