Substantial Reduction in 2.0mm Photovoltaic Glass Prices: Uncovering the Reasons Behind   

게시됨: Jul 24, 2023 17:04
출처: SMM
As we near the end of July, a notable slump in the prices of photovoltaic glass has been observed throughout the month. Currently, the prices for 3.2mm and 2.0mm photovoltaic glass are hovering between 24.8-25.5 yuan/square meter and 16.5-17.5 yuan/square meter respectively. Compared to June, these figures represent a decrease of 0.85 yuan/square meter and 1.4 yuan/square meter. But what are the underlying causes of this significant price drop?

As we near the end of July, a notable slump in the prices of photovoltaic glass has been observed throughout the month. Currently, the prices for 3.2mm and 2.0mm photovoltaic glass are hovering between 24.8-25.5 yuan/square meter and 16.5-17.5 yuan/square meter respectively. Compared to June, these figures represent a decrease of 0.85 yuan/square meter and 1.4 yuan/square meter. But what are the underlying causes of this significant price drop?

This month's drop in price can primarily be attributed to two factors. Firstly, the cost of soda ash—a raw material for photovoltaic glass—has seen a continuous decline since June. The ex-factory price for soda ash in East China has plummeted to 1,900 yuan/mt, a decrease of nearly 1,000 yuan/mt. Furthermore, the price of another significant cost component, natural gas, has shifted to non-heating season rates. While some regions began implementing summer prices in June, it will take some time for this price change to be fully incorporated into July's photovoltaic glass pricing. According to the cost estimates by SMM, the decline in these two major costs is estimated to reduce the manufacturing cost of photovoltaic glass by approximately 1.5 yuan/square meter, thereby significantly weakening the price support.

Secondly, since mid to late June, there has been a noticeable decrease in the demand for photovoltaic glass. Despite the relative high levels of module scheduling, actual output has seen a significant decrease.  SMM statistics for June show that domestic module production scheduling was around 41GW, but actual output only reached 38GW. This substantial decrease has led to a clear reduction in glass demand. However, the reason for the greater price reduction in 2.0mm products compared to 3.2mm products this month is as follows.

As can be seen from the above, since the start of 2023, the primary focus for domestic photovoltaic glass manufacturers has been the production of 2.0mm models. The constant decrease in the shipment volume of 3.2mm glass can be primarily attributed to the fact that in recent years, end-user power stations have largely demanded double-glass modules, which has in turn caused a continuous weakening demand for 3.2mm glass. As a result of these factors, module manufacturers have predominantly purchased 2.0mm glass, thus encouraging glass manufacturers to ramp up their production of 2.0mm glass. However, due to the reduction in module demand in June, downstream procurement has started to decrease. Given the unique nature of glass furnaces and the prior predominance of 2.0mm glass production, glass manufacturers are experiencing an increasing accumulation of 2.0mm glass inventory. According to a certain Anhui glass company, their 2.0mm inventory accounts for about 80% of the total inventory. Given the high inventory and low demand, glass companies have been compelled to lower their prices for 2.0mm glass this month. In an attempt to increase sales volume, they offered lower prices which resulted in a significant drop in the price of 2.0mm glass this month.

Looking forward, SMM predicts that August prices will not exhibit a strong upward trend. Although recent transactions have shown some improvement, given the glass costs and the off-season demand of module companies, glass prices will inevitably be suppressed, making it difficult for prices to rise in August.

More popular news:

Shenzhen Released 24 Measures To Support High-Quality Development Of Foreign Trade

Citi Research Cautious about Copper Prices in Three Quarters, Iron Ore Prices to Have Support from Policy Stimulus

SMM Daily Comments (Jul 3): SHFE Base Metals Rose across the Board with Tin Surging, Ferrous Metals Prices Closed Mixed

SMM Daily Comments (Jul 5): Base and Ferrous Metals Prices Mostly Fell, WTI Soared despite Lingering Concerns over Global Economic Downturn

SMM Daily Comments (Jul 6): SHFE, LME Base Metals Diverged with SHFE Nickel and Tin Skyrocketing, Ferrous Metals Rose across the Board

China Commodity Supply and Demand Boomed in June

China Vows To Increase Macro-Control Efforts, Expand Consumption And Stabilise Investment

Citi Research Cautious about Copper Prices in Three Quarters, Iron Ore Prices to Have Support from Policy Stimulus

Copper Inventories in China Bonded Zones Plunged This Week

SAIC: Car Sales in June Rose to Highest for The Year


데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
11시간 전
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
더 보기
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
PV 프레임 가동률 안정적, 기대 약화; 알루미늄 잉곳 재고 감소 가속, 알루미늄 가격 중심 상승 [SMM 분석]
11시간 전
[SMM PV 플래시]
13시간 전
[SMM PV 플래시]
더 보기
[SMM PV 플래시]
[SMM PV 플래시]
한 선도 석유화학 공장이 어제 한 생산 재개 라인을 중단했고, 오늘 다른 라인에서 LDPE 생산을 시작했다. 단기적으로 이 기업의 생산 일정은 고압 소재 라인 1개와 PV 소재 라인 1개의 병행 생산을 유지할 것이다. 이번 라인 조정 이후 해당 공장의 PV 소재 생산 규모는 다소 축소되었다.
13시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
13시간 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
더 보기
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
2026년 8월 31일, 화넝 산시 션무 10만 kW 태양광(PV) 발전 프로젝트가 전 용량 계통 연계를 달성했으며, 이는 화넝 산시 신에너지 지사의 누적 설비용량이 300만 kW를 넘어섰음을 의미한다. 션무 프로젝트 착수 이후, 산시 북부의 잦은 강풍·모래먼지 날씨, 복잡한 지형·지세, 제한된 시공 여건, 촉박한 공기 등 여러 도전에 직면한 가운데 모든 건설 인력이 힘을 모아 난관을 극복하고 우수성을 추구했다. 안전생산과 품질관리 요구사항을 엄격히 이행하고, 시공 계획을 과학적으로 조율했으며, 시공 공정 흐름을 최적화해 승압변전소 건설, 태양광 패널 지지대 설치, 모듈 포설, 집전선로 설치, 설비 디버깅 및 교정 등 핵심 업무를 질서 있게 추진했다. 정밀 관리, 표준화 시공, 상시적 문제 해결을 통해 시공 과정의 각종 어려움과 병목을 효율적으로 해소하고 공정 추진을 안정적으로 가속화했으며, 최초 계통 연계부터 전 용량 계통 연계까지의 완벽한 마무리를 성공적으로 달성해 화넝의 속도, 화넝의 책임, 화넝의 품질을 충분히 입증했다
13시간 전