SMM Morning Comments (Jun 2): Base Metals Closed Mostly with Gains

게시됨: Jun 2, 2023 10:17
출처: SMM
LME and SHFE base metals closed mostly with gains overnight.

SHANGHAI, Jun 2 (SMM) – LME and SHFE base metals closed mostly with gains overnight.

Copper: LME copper closed at $8,231.5/mt last evening, a rise of 1.5%.Trading volume was 20,000 lots and open interest stood at 252,000 lots. The most active SHFE 2307 copper contract finished at 65,760 yuan/mt overnight, up 0.75%. Trading volume was 46,000 lots and open interest stood at 185,000 lots. On the macro front, ADP employment in the US in May was 278,000, compared to the expected 170,000, and the previous reading of 296,000. In addition, the ISM manufacturing index in the United States recorded 46.9 in May, which was lower than that in April and less than expected. It has shrunk for seven consecutive months. The market expected the Fed to pause interest rate hike in June. Sellers in east China raised prices as available cargoes were scarce. Downstream buying interest weakened amid higher SHFE copper prices. Inventories in Guangdong fell for 3 consecutive days, and the sellers raised their quotes. Downstream buyers purchased as required. The overall transaction was weak. Weak domestic demand and a surge in copper futures prices depressed downstream demand. The market expects that the Fed will end the interest rate hike in June, and the pressure on copper prices will weaken.

Aluminium: The most-traded SHFE 2307 aluminium contract opened at 18,305 yuan/mt overnight, with its low and high at 18,240 yuan/mt and 18,480 yuan/mt before closing at 18,410 yuan/mt, up 240 yuan/mt or 1.32%. LME aluminium opened at $2,243.5/mt on Thursday, with its low and high at $2,233.5/mt and $2,292.5/mt respectively before closing at $2,270/mt, up $23/mt or 1.02%.

On the macro level, although Biden and McCarthy have reached an agreement on the debt ceiling issue, the plan still needs to be passed by Congress. At present, many Republican lawmakers have raised objections, and the x-date is gradually approaching. PCE data shows that US prices are still firm. The Fed is expected to raise interest rates in June. Auminum ingot social inventories continued to fall. Auminum prices have climbed above 18,400 yuan/mt, but further rise depends on whether fundamentals can improve.

Lead: Overnight, LME lead prices opened at $2,015/mt and closed at $2,007/mt after hitting the highest point at $,2037/mt and the lowest point at $1,976/mt, down 0.2%. The open interest increased 1,496 lots to 116,000 lots compared with the previous trading day, and the volume increased by 3,285 lots to 9,505 lots.

Overnight, the most-traded SHFE 2307 lead contract opened at 15,080 yuan/mt and closed at 15,050 yuan/mt after hitting the highest point at 15,100 yuan/mt and the lowest point at 15,030 yuan/mt, down 0.53%. The open interest decreased 978 lots to 60,469 lots compared with the previous trading day, and the trading volume decreased 28,208 lots to 38,066 lots.

Zinc: LME zinc moved upwards after opening at $2,252.5/mt on Thursday, closing at $2,277/mt, up $25/mt or 1.11% Trading volume fell to 10,563 lots, and open interest rose 2,265 lots to 196,000 lots. LME zinc met resistance at the 5-day moving average. LME zinc inventory decreased by 50 mt to 87,450 mt.

Overnight, the most-traded SHFE 2307 zinc contract went down after opening at 19,285 yuan/mt, but rallied towards the end of the session and closed at 19,255 yuan/mt, up 165 yuan/mt or 0.86%. Trading volume fell to 87,887 lots, and open interest decreased by 1,802 lots to 131,000 lots. SHFE zinc met resistance at the 5-day moving average. The US dollar index fell sharply. Poor fundamentals will expose zinc prices to downside risks.

Tin: Yesterday night, SHFE 2307 tin contract prices rose slightly after opening, and then fell slightly and hovered sideways, and finally closed at 209,000 yuan/mt, up 1.04%.

Nickel: Traders quoted pure nickel over the SHFE 2307 nickel contract yesterday, and the premiums stood low. NPI traders intended to quote high prices as the nickel futures prices rebounded after Indonesia delayed the tariff policy. On the demand side, according to SMM research, the spot prices of stainless steel in the Wuxi and Foshan markets rose slightly following the futures prices in the afternoon. Traders in these two markets made some purchases amid the growing stainless steel futures prices and the slowly falling social inventory, which pushed up the 300-series prices. The pick-up of spot trades earlier may support the nickel prices.

[Disclaimer: The above representation and data is based on market information SMM believes to be reliable at the time of acquiring as well as the comprehensive assessment by SMM research team, and any and all information provided in this article is for reference only. This article does not constitute a direct recommendation for investment or any decisions in any form and clients shall act on their own discreet and any decisions made by clients are not within the responsibility of SMM.]

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
11시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
13시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
13시간 전